400gpm@90psi Long Shaft Deep Well Fire Pump

ISO single-stage single-suction centrifugal pump is a new generation of energy-saving and environmentally friendly horizontal centrifugal pump independently developed by the staff of Beide Technology Group and domestic water pump experts using the domestic excellent hydraulic model and the performance parameters of domestic general centrifugal pumps. Different from the ISW basic centrifugal pump, it has the characteristics of excellent performance, high reliability, long life, reasonable structure and beautiful appearance, and has the industry leading level.

A Vertical Turbine Fire Pump serves a crucial role in fire protection systems, especially in large commercial and industrial buildings, as well as facilities with high-rise structures. Its purpose is to provide a reliable source of water at adequate pressure and flow rate to fire sprinkler systems, hydrants, and other fire suppression equipment in the event of a fire emergency. Here are the main purposes of a Vertical Turbine Fire Pump:

If an electric fire pump fails during an emergency, the following steps should be taken:

Activate the backup pump: If available, switch to a secondary pump or manual firefighting methods.
Investigate the cause of failure: After the emergency, perform a thorough inspection to determine the cause of the failure.
Repair or replace the pump: Address the identified issues and restore the pump to full operational status.
Review maintenance practices: Ensure regular testing and maintenance procedures are followed to prevent future failures.

IHG Vertical Chemical Pumps are extensively used in chemical plants, refineries, pharmaceutical industries, and other industrial settings for transferring corrosive liquids, acids, alkalis, and other chemicals with high efficiency and reliability.

Flow：250-10000 GPM
Head：30-160 m 3-16 Bar
The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.

Electric fire pumps are a crucial component of a building’s fire safety strategy. They ensure that the fire protection system has adequate water pressure to combat fires effectively, providing a critical defense that can protect lives and property. Their reliability and performance can significantly impact the effectiveness of firefighting efforts during an emergency.

Flow: 30-5000 GPM
Head: 3-20.5BAR
Speed: 980~ 3550 r/min

Vertical turbine pumps are used to extract normal temperature water and warm water below 100¡ãC from wells, rivers, lakes and seas. It is more suitable for urban, factory sewage and water with high sand content in rivers and seas, and is widely used in factories and mines, cities and countries, planting and farmland irrigation. They are also used for groundwater supply in municipalities that do not depend on surface water.

NL sewage mud pump
Max flow :180m³/h
Max head：16m

vertical turbine pump package
500gpm 8bar electric vertical turbine pump

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-200 mm
Frequency：50 or 60 Hz

Flow：50-5000 GPM
Head：30-160 m 3-16 Bar 40-232 psi
Power：11-1000 kw
Frequency：50 or 60 Hz

The OTS Double-Suction Split-case centrifugal Pump with High-Pressure Electric Motor is an exceptional firefighting equipment. This powerful combination delivers high flow rates and unmatched pumping efficiency, ensuring robust and continuous firefighting actions. Its compact design allows for quick deployment and rapid response, making it suitable for various settings. From rural wildfires to urban firefighting needs, this firefighting pump safeguards communities of all sizes, representing the pinnacle of safety and protection.

The long-shaft submerged pump is suitable for conveying belt particles, high viscosity, strong acid, alkali, salt, strong oxidant and other corrosive media. The new submerged pump is suitable for conveying various light media such as flammable and explosive. The shell, outlet pipe and overflow parts of the traditional submersible pump are all made of corrosion-resistant materials. The motor part is placed on the liquid surface, and the pump part is placed under the liquid surface. It has strong corrosion resistance, no blockage and high temperature resistance. Features. The pump body, motor and overcurrent parts of the new type of submersible pump are all made of special materials. The motor part and the pump part are coaxially connected and placed under the liquid surface. Features.

used for pumping normal temperature water and warm water under 100°C from wells, river, lake , sea. Type JCW are better used for city, factory dirty water and water containing great sand in river and sea, widely used in factories and mines, city and countries, petrolatum filed, plant and irrigation on farmland.

Advancements in fire pump technology include the development of more efficient pump designs, enhanced control systems with digital interfaces, remote monitoring capabilities, and variable speed drives. These innovations improve the performance, reliability, and ease of maintenance of fire pumps, ensuring better protection and lower operational costs.

·UL Standard:
Flow:50-500GPM
Head:6-16 Bar（90-230PSI）
·Non-UL Standard:
Flow：50-5000 GPM
Head：3-16 Bar（40-232 psi）

YW liquid sewage pump is a new generation of liquid sewage pump product successfully developed on the basis of our advanced technology at home and abroad and the use characteristics of liquid sewage pump. It has remarkable energy saving effect, anti-winding, no blockage and other characteristics, and has a unique effect in the discharge of solid particles and long fiber garbage.

Ensure optimal performance and reliability of your fire protection system with our premium Jockey Pumps. Designed for maintaining constant pressure in fire sprinkler networks, our Jockey Pumps offer dependable pressure control, enhancing fire safety measures in commercial and industrial settings. Trust in our high-quality Jockey Pumps to safeguard your property and personnel against fire hazards effectively.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, the impeller, the pump shaft, the bearing, the coupling, the sealing form, the lifting pipe, etc. The specific fire pump model is determined according to the environment and performance requirements. According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

Electric fire pumps should be installed in a dedicated, well-ventilated room with adequate space for maintenance. The location should be easily accessible and comply with local fire codes and standards.

The video shows the process of electric vertical turbine pump testing. Vertical turbine pump is better used for city, factory dirty water and water containing great sand in river and sea, widely used in factories and mines, city and countries, petrolatum filed, plant and irrigation on farmland.

Horizontal fire pump with high efficiency and low noise operation, good resistance to cavitation performance, reasonable structure, long service life etc, it is mainly used for pressurized water supply in fire control system, can also be used in industrial water supply and drainage, pressurized water supply in high-rise buildings, distant distance water, cold and hot water circulation pressurization in heating, bathrooms and boilers, water supply in air-conditioning and refrigeration system and supporting equipment, etc.

Pump type is vertical multistage centrifugal pump, with the use of health clean, high efficiency, low noise, resistance to mildly corrosive and compact structure, beautiful appearance, small size, light weight. The use of easy maintenance, and reliable sealing performance. Use for high-rise building pipeline booster, fire booster regulator system.

The small CDL package is designed to have water supply function. 2 CDL pumps with pressure tank and controller and accessories with strong base on skid.

The horizontal pipeline pump is a horizontally arranged pumping device used for conveying liquids or gases. It consists of an electric motor, pump body, impeller, and sealing device. Compared to vertical pipeline pumps, the horizontal pipeline pump offers advantages such as a smaller space requirement, convenient maintenance, stable operation, and wide applicability. Its horizontal layout helps reduce axial and radial loads, thereby enhancing the pump’s stability and operational efficiency. The horizontal pipeline pump is suitable for conveying various liquids or gases and can be selected based on specific process requirements and medium characteristics. It is recommended to consult with professional engineers or pump suppliers when purchasing and using a horizontal pipeline pump to ensure the selection of suitable equipment.

Flow：50-5000 GPM
Head：3-16 Bar
The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing.

Flow：500 GPM
Head：125 psi
The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

Sewage pump is a kind of non-clogging pump, with many forms: such as submersible and dry type, dry type sewage pump with cam rotor, mainly used to transport urban sewage, feces or liquid containing fiber, paper scraps For mediums such as solid particles, the temperature of the medium to be conveyed is usually not greater than 80 ¡ãC. Because the conveyed medium contains fibers that are easily entangled or bunched. Therefore, the flow passage of this kind of pump is easy to be blocked. Once the pump is blocked, the pump will not work normally, and even the motor will be burned, resulting in poor sewage discharge. It has a serious impact on urban life and environmental protection. Therefore, blocking resistance and reliability are important factors for the quality of sewage sewage pump.

A split pump is a centrifugal pump with two single-suction impellers or a double-suction impeller supported between bearings. The housing is axially separated from opposing suction and discharge flanges. This facilitates maintenance of the pump. This robust and simple design is especially suitable for high flow applications.

Key performance metrics include flow rate (measured in gallons per minute, GPM), pressure (measured in pounds per square inch, PSI), and the pump’s power rating.