Advanced Technology Driven ZWG non-negative pressure water supply equipment

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water lift pipe, etc. The specific fire pump model is determined according to the environment and performance requirements, and at the same time According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

The SXBWP Non-Negative Pressure Frequency-conversion Water Supply Equipment offers a comprehensive solution for addressing low water pressure challenges in various settings. Designed to cater to areas with inadequate municipal water pressure, as well as residential complexes, office buildings, hotels, schools, and industrial enterprises, this equipment ensures a stable secondary pressurized water supply. With features such as non-negative pressure generation, water and energy conservation, prevention of secondary pollution, and convenient installation, the SXBWP equipment delivers reliable water pressure enhancement while promoting efficient water usage and minimizing environmental impact.

Volume:500-2000L

This large, high-efficiency firefighting foam canister is designed for industrial and professional settings, offering exceptional fire extinguishing performance and reliable safety assurance. Whether in factories, warehouses, or other high-risk environments, it is the best choice for fire rescue operations.

Petrochemical process pumps are suitable for conveying clean or liquids containing a small amount of particles, low temperature or high temperature liquids, neutral or corrosive liquids. Suitable for oil refining, petrochemical, coal processing and cryogenic engineering, papermaking, metallurgy, medicine, synthetic fiber, power generation, environmental protection, etc.

The stainless steel submersible sewage pump adopts the design of large flow channel anti-clogging hydraulic components, which greatly improves the dirt passing capacity, and can effectively pass through 5 times the fibrous material of the pump diameter and solid particles with a diameter of about 50% of the pump diameter.

The device operates by drawing foam concentrate from a storage tank and blending it with water at a set ratio, often using a venturi or a balanced pressure system. The mixed solution is then pressurized and delivered through fire hoses, nozzles, or sprinkler systems to the fire scene.

end suction pump capacity: 1000gpm, head: 20m, power: 22kw. Use to transfer water.

The high-efficiency non-clogging submerged sewage pump is a new generation of pump products successfully developed on the basis of the introduction of foreign advanced technology and combined with the use characteristics of domestic water pumps. Features. It has a unique effect in discharging solid particles and long-fiber waste.

Self priming pump diesel engine driven works for water or medium similar to water that viscosity below 5°E and temperature below 80°C(176°F). It is compact, easy to operate, running stable, easy to maintain, efficient, with long service life and large suction capacity.

WXZQ series fire pneumatic water supply equipment is composed of fire pressure stabilizing device, fire pump
and electric control system. As a complete set of equipment, it can meet all technical specifications of automatic
fire water supply. In addition, it can accept and process all kinds of fire signals, replace the fire control center,
and send out all kinds of operation and fault alarm signals.

This kind of controller was fit for high-voltage motor，which is the voltage of motor is 6000V or 10KV.

including high-voltage switch cabinet, High-pressure solid-state soft starter device,High-voltage reactive power centralized compensation device,direct current cabinet, onsite cabinet, intellengint inspection cabinet, High-voltage patrol inspection contact cabinet, Emergency starting cabinet for high-voltage machinery

The equipment CONSISTS of frequency conversion control cabinet, no negative pressure device, automatic control system and remote monitoring system, water pump unit, voltage regulator compensator, negative pressure eliminator, pressure sensor, valve, instrument and piping system.

These are pictures of an EJ fire pump set control panel. The cabinet is made of galvanized sheet.

The box-type non-negative pressure water supply equipment can be directly linked to the water supply network to ensure that the water supply network does not generate negative pressure. The pressurized water in the closed tank at peak time can compensate for the shortage of water supply in the water supply network and meet the needs of users.

The Portable Irrigation Pump is a portable and user-friendly tool used primarily by farmers and gardening enthusiasts for small-scale irrigation in fields, vegetable gardens, and flower beds. With its manual operation, this pump requires no external power source, making it suitable for remote areas lacking electricity or other energy supplies. Comprising a handle and a suction pipe, users can easily draw water from the source through reciprocating motion, delivering it efficiently to the roots of crops or plants for effective irrigation. Being both economical and eco-friendly, the Portable Irrigation Pump offers a reliable and convenient solution, particularly in areas with limited resources and where other irrigation equipment may not be available.

The ZWX box-type non-negative pressure water supply equipment is a pressurized water system designed to address inadequate municipal water pressure in critical settings such as hospitals and hotels, where water cannot be shut off. It also serves as an ideal solution for meeting the domestic water needs of high-rise buildings and, specifically, fulfilling the water requirements of schools. This equipment ensures a continuous water supply, even during maintenance or emergency situations, effectively resolving the challenges posed by low water pressure. With its efficient pressurized water supply and advanced control technology, the ZWX equipment offers stable water pressure and flow rates, catering to the diverse demands of different settings. Furthermore, its intelligent operation and energy optimization contribute to reduced energy consumption.

Specifications
1. for life, fire
2. Production sharing water
3. Low noise, good reliability
4. Reasonable construction
Application
Industrial and civil construction fixed fire protection system（fire hydrant extinguishment system, automatic spray extinguishment system, water spray extinguishment system）water supply, especially suitable for water supply of high-rise buildings, and also use for water supplying of fire-fighting and life in construction, industry and mining, boiler water supply, etc.

The hand-carried fire pump has the advantages of small footprint, convenient maintenance, and easy portability. It is more advantageous in areas where fire-fighting vehicles cannot pass. The hand-carried fire pump is ideal for drainage, drought resistance, greening, water supply and emergency disaster rescue. equipment.

The suction and discharge ports of the GDL vertical multistage pipeline centrifugal pump are located on the same straight line. The rotor part is composed of shaft, impeller, impeller retaining sleeve, shaft sleeve and other parts, and the water inlet section, middle section and water outlet section are connected by tension bolts. The shaft seal adopts a mechanical seal, lubricated and cooled by the pressure water in the balance chamber. It is an ideal pump type for the transportation of hot and cold water or liquids with similar physical and chemical properties to water in various industries.

Sewage pump is a kind of centrifugal impurity, there are two kinds of submersible and dry. It is mainly used for the treatment of industrial sewage and domestic sewage, and has played a great role in environmental protection. In addition, there are also cutting impellers in the sewage pump, which can play a good role in the treatment of various fibrous substances in the sewage.

The fire pump is a stainless steel outdoor control cabinet with waterproof features. The fire pump control cabinet is mainly suitable for industrial production and various building water supply, drainage, fire protection, sprinkler pipe network pressurization and HVAC cold and hot water circulation and other occasions automatic control of fire pump

It is composed of pressure water tank, control cabinet, top pressure gas storage system, decompression release device and other basic components; In the condition of fire fighting, the compressed gas is filled into the pressure water tank to replace the fire fighting water in the tank, and always maintain the rated working pressure of fire fighting, and the fixed fire water supply equipment for the fire fighting pipe network.

This fire pumps are multifunctional products, which can be used for conveying diversified mediums such as running water and industrial liquids. They are applicable to different temperature ranges, flow ranges, and pressure ranges. The Vertical Multistage Pumps are applied to noncorrosive liquids, and this type pumps are applied to slightly corrosive liquids.

Our highly acclaimed Box-type Non-Negative Pressure Water Supply Equipment is the savior for your hotels, hospitals, schools, and more! Not only does it provide stable water flow and pressure, but it also guarantees fresh water quality! Suitable for life water supply systems in high-rise buildings, residential communities, and large-scale architectural complexes, bid farewell to water shortage worries! The Box-type Non-Negative Pressure Water Supply Equipment features an advanced automatic control system that instantly starts the water pump when demand increases, providing you with a continuous and stable water flow. And when demand decreases, the pump intelligently stops, avoiding energy waste! The compact box-type structure makes installation and maintenance a breeze! Whether it’s solving water supply issues in low-pressure areas or addressing the needs of places like hotels, hospitals, and schools where water cannot be shut off but face insufficient tap water pressure, our Box-type Non-Negative Pressure Water Supply Equipment offers the perfect solution!

Submersible mixer, also known as submersible propeller, is suitable for promoting and stirring sewage containing suspended solids, dilute mud and industrial process liquid in the technological process of sewage treatment plant, creating water flow, strengthening the stirring function and preventing sludge precipitation. It is an important equipment in the technological process of municipal and industrial sewage treatment.

The electric pump in the picture is ISW pump. ISW series horizontal single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly horizontal centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps. In addition, according to different operation temperatures and mediums, we developed the hot-water pump (ISWR), corrosion-resistant chemical pump (ISWH) and oil pump (ISWB).

XBD-S fire pump is a horizontal split structure type. The suction port and the discharge port are below the axis of the pump, and the horizontal direction is perpendicular to the axis. The pump of this structure type does not need to disassemble the inlet and outlet pipes during maintenance. Installation and maintenance is very convenient. The rotor as a whole
The combined parts can be hoisted as a whole for easy maintenance, and the same rotor part can be used for reverse rotation. The bearings at both ends are made of high-precision imported deep groove ball bearings, which have smooth operation, low noise and long service life.
Shaft seals are available in two types: mechanical seals or packing seals, and users can choose by themselves.

The pressure tank, also known as the pressure tank, is one of the important components in the secondary water supply equipment. Its core function is to stabilize the water pressure, so it is called the pressure tank.
The reason why the surge tank can stabilize the water pressure is mainly achieved by compressing the gas in the capsule, because water is an incompressible fluid, and water with the same pressure can compress the gas to store water and have a certain pressure.

The sewage pump is a kind of centrifugal impurity and has many forms: such as submersible type and dry type. At present, the most common submersible type is the WQ type submersible sewage pump, and the most common dry type sewage pump is the W type horizontal sewage pump. And two types of WL vertical sewage pump. Mainly used to transport urban sewage, manure or liquid containing fiber. For the medium of solid particles such as paper scraps, the temperature of the conveyed medium is usually not greater than 80¡ãC.

The remote monitoring system for the water supply pump station is suitable for the remote monitoring and management of the pressurized pump station in the urban water supply system.
The pump station manager can remotely monitor the water level of the pump station pool or the entry pressure, the working status of the booster pump group, the outbound flow, and the exit pressure from the monitoring center; they can remotely control and automatically control the start and stop of the booster pump group; When optical fiber communication is used, the panorama and important stations in the station can be monitored by image, so that the pump station can be unattended.