Advantage of XBC Diesel engine fire pump system

The diesel engine fire pump set has the characteristics of good starting characteristics, strong overload capacity, compact and reasonable structure, convenient maintenance, simple and reliable use, etc. The unit is equipped with protection functions such as overspeed, low oil pressure, three start failures, high water temperature, low oil level, and low battery voltage. At the same time, it can be connected with the customer’s automatic fire alarm device or the fire control system control cabinet produced by our factory to realize the function of remote monitoring.

A fire pump is a critical component of a fire sprinkler system, providing the necessary water pressure to ensure the sprinkler system works properly. Fire pumps are usually powered by electric motors or diesel engines and they come in centrifugal, turbine, or rotary types.

To ensure that the fire pump is working properly, it is important to maintain and test it regularly. Regular maintenance tasks include inspecting the motor and fuel system, changing the oil, and checking the battery. Testing the pump pressure and flow rate should also be done on a regular basis. If any issues are found, it is important to contact a professional for assistance. A trained technician should also inspect the fire pump annually.

EJ Fire pump set Fire pump set consists of one main pump coupled to electric motor, one stand by pump coupled to diesel engine, jockey pump, pressure vessel, controller for manual or automatic operation of system and standard accessories mounted on base frame.This fire pump set can be used for fire hose and fire hose reel system, fire sprinkler system, fire water monitor system, fire alarm system and fire hydrant system.

Yes, installing diesel fire pumps in different environments or applications may require special considerations to address factors such as ambient temperature, altitude, seismic activity, corrosive atmospheres, and specific regulatory requirements. For example, pumps installed in outdoor or exposed locations may require weatherproof enclosures or additional corrosion protection, while pumps installed in seismic zones may need to be anchored securely to withstand earthquakes.

The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations. With its lightweight and portable design, coupled with versatile functionality, the EDJ Diesel Engine Fire Pump System is suitable for various scenarios. Whether you are part of a fire department or an industrial enterprise, the EDJ Diesel Engine Fire Pump System is your indispensable rescue partner.

Jockey pumps are a vital component in maintaining the pressure within a fire protection system. Their primary role is to keep the system’s pressure within the desired range. When there’s no fire event, the jockey pump operates to counteract any pressure losses due to minor leaks or gradual pressure decreases in the system.

By maintaining system pressure, jockey pumps ensure that the primary fire pump is ready to respond quickly and efficiently when a fire occurs. This pressure stability is crucial for the proper functioning of the entire fire protection system, allowing for immediate water flow to sprinklers or hose connections.

This group of fire pumps consists of two electric pumps + one jockey pump, and the motors are connected to multistage pumps.

A single-stage fire pump has only one impeller, and a multistage fire pump can have two or more impellers, which can achieve a larger lift at the same flow rate. Generally, it can be used as an industrial pump, a domestic pump and a fire pump.

Public transportation systems, including subway stations and railway terminals, are complex environments with high volumes of passengers and potential fire hazards from electrical equipment, flammable materials, and mechanical systems. Fire pumps are vital in these settings for delivering the water or suppression agents necessary to extinguish fires in tunnels, platforms, and adjacent facilities. Jockey pumps ensure constant pressure in the system, so fire suppression mechanisms like sprinklers, hydrants, and standpipes are always prepared to respond. Given the confined and underground nature of many transportation hubs, fire protection systems must be capable of addressing fires in tight, poorly ventilated spaces while facilitating the safe evacuation of passengers. The pumps also need to support fire hose connections for firefighters, who might need to cover long distances within tunnels or elevated railways. Regular inspections and emergency drills are essential to ensure that fire pumps are fully operational and integrated with ventilation and evacuation systems, providing a coordinated response to fire emergencies in these high-risk, densely populated environments.

EDJ series fire pump set consists of electric pump + diesel pump + jockey pump and all accessories.
The dual power fire pump pressure switch and control cabinet can automatically turn on/off the three pumps – the electric pump and the jockey pump work when there is electricity, and the diesel pump when the power is off.
Flow range: 50-5000 GPM
Pressure range: 4-14 bar
Power range: 4-325 KW

Fire pumps are mainly used for pressurized water delivery in firefighting system pipelines, and can also be used in industrial and urban water supply and drainage, high-rise building depressurized water delivery, long-distance water delivery, heating, bathroom, boiler cold and warm water circulation pressurized air conditioning refrigeration system water delivery and equipment matching, etc.

Fire pump room design is vital for system functionality, accessibility, and safety. This article delves into the key considerations when designing a fire pump room, such as space requirements, ventilation, and fire suppression. It emphasizes the importance of a well-designed pump room to ensure optimal pump performance and personnel safety.

Jockey pumps help extend the lifespan of fire pumps by maintaining system pressure and preventing unnecessary cycling of the main fire pump. By handling minor pressure fluctuations and small leaks, jockey pumps reduce the wear and tear on fire pumps, which would otherwise start and stop frequently to maintain pressure. This reduced cycling minimizes mechanical stress on the fire pump’s components, such as bearings, seals, and impellers, thereby prolonging its operational life. Additionally, jockey pumps consume less power and operate more quietly than fire pumps, leading to energy savings and reduced noise pollution in facilities. By ensuring that fire pumps only operate during actual emergencies, jockey pumps contribute to the long-term reliability and efficiency of the fire protection system.

product description:
EDJ fire pump set consists of diesel engine fire pump, electric pump set and stabilized pump to form an automatic fire water supply system
1. Electric pump, single-stage pump, horizontal split pump, end-suction pump, multi-stage pump, the material is cast iron or stainless steel, and the impeller can be made of copper impeller
2. Diesel engine pump, the flow rate is the same as that of the electric pump. The diesel engine is connected by a highly elastic coupling or a universal joint to form a fire pump set. The set also includes fuel tanks, water tanks, fans, control panels and other components.
3. Stabilizer pump, horizontal or vertical, small flow, higher lift than electric pumps and diesel pumps
4. Control cabinet, automatic control of electric pump, diesel engine pump and stabilized pump, with overload, overcurrent protection
5. The accessories include check valve, gate valve, air pressure tank (0.6mpa, 1.0mpa, 1.6mpa), pressure gauge, pressure sensor, common inlet and outlet pipeline, soft joint, flange and common base.

The diesel pump + jockey pump can be started normally in case of power failure. Jockey pump ensures the presence of liquid in the fire pipeline. When a fire occurs, the diesel pump starts to work within ten seconds to control the fire.

50gpm8bar ED fire pump set

two sets 50gpm 8BAR EDJ fire pump after finish product

1. Electric pump, can use multistage pump, material can be cast iron, stainless steel, and bronze impeller

2. Jockey pump, horizontal or vertical, capacity will be small, but head should be higher than electric and diesel engine pump

Jockey material casing: cast iron ,shaft and impeller SS304

Fire pumps are necessary to ensure an adequate and consistent water supply for firefighting, especially in buildings or areas with low water pressure. They help maintain the required pressure to operate fire sprinkler systems and standpipes.

1. Ability to provide a steady and reliable flow of water: Fire pumps are designed to provide a steady and reliable flow of water to the fire suppression system. This ensures that the fire is extinguished quickly and without any damage to the property.

2. High-Pressure Output: Fire pumps can provide a high-pressure output to ensure that the water is able to reach further distances and at higher pressures than would be achievable by a standard water system. This is important in controlling and extinguishing fires, as it allows the water to reach all areas of the fire.

3. Emergency Operation: Fire pumps are designed to be able to operate in the event of a power outage. This ensures that the fire suppression system can still be operational in the event of a power failure. This is especially important in commercial buildings and other areas where power outages can occur.

4. Automatic Activation: Fire pumps are designed to automatically activate in the event of a fire. This ensures that the fire suppression system can be activated quickly and without any manual intervention. This is especially important in the event of a large fire, as it ensures that the system is already in operation before the fire department arrives.

5. Low Maintenance: Fire pumps are designed to be low maintenance, requiring only regular inspections and maintenance to ensure that they are working correctly. This ensures that the fire suppression system is always ready for use and that it can be relied upon in the event of a fire.

Fire pumps are more commonly used in commercial and industrial settings. Residential buildings often rely on municipal water pressure for fire protection. However, in some cases, residential structures with specific design requirements may incorporate fire pumps.

With the continuous progress of the times, the application of diesel engine fire pumps is becoming more and more extensive. Diesel engine fire pump is a common necessary facility. Only when the fire signal comes, and the electric water pump fails or the power supply is cut off, the diesel engine fire pump will automatically start. The diesel engine fire pump is installed together with the electrical instrument, with complete functions, compact structure, automatic fault alarm, accepting the starting signal, and can automatically complete the starting procedure and run at full load quickly. When the diesel engine fire pump is insufficient in fuel, low battery voltage, and high lubricating oil temperature , enough to ensure that the diesel engine fire pump starts in a low temperature environment, the entire system of the diesel engine fire pump is safe, reliable, and easy to use.

1. The biggest feature of the complete fire pump set is its strong reliability. Even if it is restarted for a long time, it will not bite to death, and it can be restarted normally.
2. The use efficiency is very high. During the use process, there will not be too much noise. The installation form of the fire pump set is very flexible, and it is convenient for maintenance, which can effectively save installation and maintenance costs.??

1.Flow：30-9000 GPM
2.Head： 3-20 Bar (40-300 psi)
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min
The EDJ Fire Pump Set includes diesel engine pumps, electric pumps and jockey pumps.
In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants,oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

This equipment is an EEJ fire pump set customized by a Greek customer with a frequency of 50Hz. The electric pump adopts an XA pump.This pump combines the advantages of similar products in China and abroad, and is designed with excellent hydraulic model.Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operation cost of pumps in various applications.

It depends on the type of fire pump and the specific design of the system. Generally speaking, most fire pumps should be set to automatic mode in order to ensure that they operate when needed. However, in some cases, manual mode may be more appropriate and necessary.

50gpm 8bar ED fire pump product process

Fire pump system comprises a combination of electric motor driven fire pump+diesel engine driven fire pump+electric motor driven jockey pumps+ control panel and other accessory.

Diesel engine fire pump unit is a kind of pump equipment that is widely used in fire protection, and it is more suitable for mobile work in fire pumps. In fact, it is driven by a diesel engine connected to the pump head of the fire pump. Compared with motor drive, it can be used in the field, mines, and places lacking power supply. It is also called a diesel engine pump or a diesel engine fire pump unit.

Before starting the electric motor fire pump set, the inspection work is indispensable. Check the condition of the power supply and motor, whether the water volume of the reservoir is sufficient, and whether the water inlet and outlet are normal. The inspection is normal and then starts; after the fire pump is started, attention should be paid to the vibration and temperature rise. It is necessary to set the maintenance time period to ensure the stable performance of the fire pump. According to the needs of system operation control and maintenance management, the electrical control cabinet of the fire pump mainly has the functions of starting and stopping the pump, switching between the main and standby pumps, manual automatic switching, dual power switching, patrol inspection, Protection, feedback mechanical emergency start and other functions.

small flow fire pump set ready to dispatch
100gpm 5bar ED fire pump set

This is a set of EDJ fire pump set, which consists of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.