Application of EDJ fire pump

Diesel pumps can be combined with electric pumps, jockey pumps, etc. to form an automatic water fire-fighting water supply system, and can be linked with the fire control center.

When the pump set receives the starting command, if the mains power is cut off, the automatic control cabinet of the diesel engine will immediately send a start signal to the starting motor of the pump set to start the motor to start the diesel engine at idle speed, and then gradually adjust the throttle to accelerate the diesel engine to the rated speed . The control system will automatically monitor the operation of the diesel engine, such as the oil pressure, oil temperature, speed of the diesel engine, outlet pressure of the water pump, etc., and determine whether the diesel engine starts normally through automatic monitoring. If the start fails, the control system will send a restart signal, and if the three starts fail, the automatic control system will send a failure alarm. When the pump set receives a signal that the pressure of the pipeline network is restored or the mains power is restored to normal, the pump set will quickly slow down and stop automatically after monitoring the idle position for a period of time.

In cold climates, fire pumps must be designed and installed to prevent freezing and ensure reliable operation in low temperatures. This includes using heated enclosures or pump rooms to keep the pumps and associated piping above freezing temperatures. Insulation and heat tracing can be applied to pipes to prevent water from freezing, particularly for outdoor or exposed piping. Additionally, anti-freeze solutions may be used in sprinkler systems to protect against freezing. Fire pumps in cold climates must also be tested and maintained regularly to ensure that all components, including heaters and insulation, are functioning correctly. Special considerations are also given to the type of fire pump selected, with diesel-powered pumps often preferred over electric ones in areas where power outages during winter storms are common.

XBC diesel engine fire pump is a fire protection product independently developed and produced according to the market demand and usage of domestic and international fire pumps. The use of this series of products, long operating life, good product reliability, is currently the domestic and international market fire engineering, sprinkler facilities fire pump products. The fire equipment quality supervision and testing center has been approved by the fire department according to the performance requirements and experimental methods of GB6245-2006 “fire pump”.

Early detection of fire pump issues is crucial for preventing critical system failures. This article explores the functionalities and benefits of fire pump alarms and monitoring systems in detail. It explains how these systems provide real-time data on the status and performance of fire pumps, enabling early warning of potential problems. By embracing these technologies, facility managers can ensure continuous oversight and timely intervention.

Three start-up functions for diesel engines:
1. Manual start function: manual and automatic interlocking can be completed through the transfer switch, and the manual start function can be realized:

2. Automatic manual function: allow to start three times. If the startup fails for three times, it will issue a “startup failure alarm” and automatically exit the startup state. After a successful startup, the time from startup to rated load is 5-10-15S (depending on the unit capacity);

3. Emergency manual direct start function: When the automatic control device fails, the emergency manual direct start function can be realized.

The EEJ Fire Pump System is an innovative solution designed to enhance fire safety in various settings. With exceptional performance and efficiency, the EEJ Fire Pump System delivers high pressure and large flow capacity, enabling rapid and effective fire suppression. Its intelligent features, including real-time monitoring and remote control capabilities, contribute to the system’s reliability and ease of operation. Overall, the EEJ Fire Pump System is a reliable choice for safeguarding lives and properties, making it an ideal fire protection solution for commercial buildings, industrial facilities, and residential areas.

Electric motor fire pumps are used in various water environments, not only to meet the general water supply but also to be a good helper for fire water. The electric motor fire pump is manufactured with good structure and workmanship. It has a wide range of performance, and is easy to use and operate for a long time. The motor fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.

Fire pump system include Diesel engine pump + Electric motor pump+Jockey pump. Sometime, it just include Electric pump+Jockey pump.
Its power: 1.0 to 20kw, flow: 15-300gpm, head: 3-10bar, 50/60hz. The material: Cast iron or SS, bronze impeller.

As the name implies, fire pumps are used in firefighting. They are divided into different types according to different classification methods. They are widely used in environmental protection, water treatment, firefighting and other departments to pump various liquids due to their fully sealed, leak-free, and corrosion-resistant characteristics. , It is the ideal pump for creating leak-free, pollution-free civilized workshops and civilized factories.

ED small fire pump set (referred to as ED small fire complete set of water supply equipment) refers to a highly integrated electromechanical system with a flow rate of less than 100GPM and composed of electric centrifugal pumps, multi-stage centrifugal pumps (booster pump sets), diesel engine centrifugal pumps, pressure limiting protection Device (safety valve), valve fittings, control system, pressure sensor system, waterless protection device, backflow preventer, soft joint, bypass pipeline, common base, filter, etc. It is a fire-fighting water supply equipment that continuously supplies water to the fire-fighting pipe network at a preset pressure.

Industrial manufacturing plants often deal with hazardous materials, heavy machinery, and complex processes, making fire safety a critical concern. Fire pumps are essential in these facilities for delivering sufficient water pressure to fire suppression systems like sprinklers, standpipes, and specialized suppression systems, such as foam or gas-based systems used for chemical fires. Jockey pumps help maintain pressure in these extensive systems, ensuring they are always ready to activate immediately. In many industrial plants, fire pumps need to handle large volumes of water to cover expansive areas like production floors, storage facilities, and hazardous material zones. Additionally, fire suppression systems must be designed to address specific risks, such as oil-based fires, electrical hazards, or flammable chemicals. Fire pumps in these environments require regular maintenance and testing to ensure they remain reliable, especially given the high risk of equipment malfunction or accidents in such settings. Integrating the fire pump system with automated fire detection systems, alarms, and emergency response protocols is critical for minimizing damage and protecting workers in the event of a fire.

Flow: 30-9000GPM
Head: 3-20Bar
Speed: 740-2900r/min
Frequency: 50 HZ or 60 HZ
The ED Fire Pump Set combines electric and diesel engine pumps to ensure uninterrupted fire protection and a reliable water supply.
In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants,oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

The conventional electric pump is the main pump, the diesel engine pump is the backup pump, and the voltage stabilizer pump plays a role in the stabilization of the whole system. When the electric pump fails or the mains is cut off, the control cabinet will receive the pressure gauge from the electric contact. When the signal comes, the diesel engine pump will be started within 5 seconds, and the rated working condition will be reached within 20 seconds to ensure the normal operation of the fire extinguishing work.

The product is EJ fire pump set. The EJ fire pump set has one electric pump and one jockey pump. The electric pump in the picture is XA pump. XA series horizontal single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly horizontal centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps.

EDJ-ISW fire pump is composed of electric pump + diesel engine pump + jockey pump. It is suitable for fire water, but also for industrial city water supply and drainage, high-rise building pressurized water supply, long-distance water supply, heating, bathroom, boiler cold and warm water circulation pressurization Air-conditioning refrigeration system water supply and equipment matching and other occasions.

1150LPM@60M Fire Pump Package Set For Your Reference

120≤ Q≤1000GPM
H＜150m
Electric pump + Diesel engine pump + Jockey pump
Pump – Horizontal end suction pump

The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

Our pump for pumps has ISO centrifugal pump with high efficiency, XA centrifugal single-stage pump, ISW centrifugal pump which can be used for all customers with more competitive price, XBD centrifugal pump which has same specification as ISW centrifugal pump, OTS split case which has high capacity to meet the customers requirements, D multistage pump with high pressure up to 60bar. JC vertical turbine pump for the water level lower than the pump suction. XBC diesel engine fire pump for all pumps use diesel engine.

Fire pumps are designed to start promptly in case of an emergency. The time it takes to start depends on factors such as the type of pump (electric or diesel) and the specific system design. Regular testing helps ensure quick response times.

It is widely used in environmental protection, water treatment, fire protection and other departments. It is used to pump all kinds of liquids. It is the ideal pump and fire protection system to create no leakage, no pollution civilized workshop and civilized factory.

Problem one lower water or no water
1, electric pump reversal will lead to the pump doesn’t produce water.
2, the pump can’t normal water into the same can’t be water, check whether the water bay or check stopcock is blocked or stuck, pumping pipe if there’s a leak will also affect the water into the water.
3, the pump internal corridor of the wear and tear or connection out, check the pump and motor coupling wear and tear, loose and impeller is worn.

Problem two ：
1 、 Check the power force as described over, including connectors, switches, fuses,etc.
2. Check whether the impeller in the pump is jammed by foreign objects
3. A burnt motor will also affect the launch of the pump.

Problem three the water affair is big for a while and small for a while
1. still, the lack of depth down the well may beget this problem, If the pump is a submersible pump.
2. The inflow rate of the pump is too high and needs to be replaced with a suitable pump.

Our company’s fire pump equipment is widely used in state agencies, various residences, pressurized pump stations, hotels, schools, hospitals, etc. due to its outstanding features such as environmental protection, energy saving, and safety.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar 40-300 psi
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min

The outdoor fire pump set is designed to enhance fire safety in various applications. From powering fire hydrants and stabilizing sprinkler systems to safeguarding residential areas, industrial buildings, and high-risk environments, the Outdoor Fire Pump Set delivers optimal performance and unmatched reliability.

1. Better is a professional fire pump manufacturer with 18 years of industry experience

2. Professional sales team and R&D team, strong technology, self-produced control system

3. The motor is self-produced, which can produce 50/60Hz

The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations. With its lightweight and portable design, coupled with versatile functionality, the EDJ Diesel Engine Fire Pump System is suitable for various scenarios. Whether you are part of a fire department or an industrial enterprise, the EDJ Diesel Engine Fire Pump System is your indispensable rescue partner.

Fire pump professional production manufacturers, complete products, manufacturers direct sales, after-sales worry, pump quality is good, durable products.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar 40-300 psi
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min
The EDJ Fire Pump Set is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water.

Simplifies piping design
Single source unit responsibility
A complete package that will meet NFPA20 requirements
Packaged systems are performance and hydrostatically factory tested at an IS09001 certified manufacturing facility prior to shipment.
No material lost due to on-site material handling
Improves the speed of construction and reduces on-site installation time
Only external suction, discharge and power connection are required on-site
State of the art engineering design

The Fire Pressure Stabilization Equipment, coupled with the CDL Vertical Multistage Fire Pump, offers a comprehensive solution to elevate fire safety measures. This powerful combination ensures a consistent water pressure for effective fire suppression. By incorporating pressure stabilization technology, this system guarantees an uninterrupted fire water supply, efficient water distribution, and reliable operation of fire hydrants and sprinkler systems. With advanced infrastructure and the ability to maximize firefighting capabilities, this configuration significantly enhances overall fire safety standards. Investing in fire pressure stabilization equipment is a proactive step towards ensuring superior fire protection and providing peace of mind in critical situations.

The DJ Fire pump set is made of Diesel fire pump+Jockey pump.
Application Scope：Equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

Diesel engine fire pump, as a fixed fire extinguishing equipment, has been widely used in fire diversion, especially in the case of no power supply or abnormal power supply and other emergencies, other diesel engines can also be equipped as power engines according to the needs of users.