Brief Introduction of End Suction Diesel Fire Pump

Factors to consider include the required flow rate and pressure, the power source available (gasoline, diesel, or electric), the distance from water source to fire hazard, the type of fire hazard (e.g., size of fire, type of fuel), and any local regulations or codes governing fire pump installations. Consulting with a qualified fire protection engineer or technician can help determine the most suitable pump for specific needs.

The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

Whether the diesel engine fire pump can run for a long time, the rescue of fire accidents is very important, of course, it is hoped that the fire fighting equipment can run safely for a long time. Diesel engine fire pump principle principle When all equipment is in normal operation, the switch should be set in the automatic position, and all operation signs are simple and clear.

The advantage of the diesel engine fire pump is that when a fire breaks out, the power supply fails, and the electric fire pump set cannot be put into use normally, the diesel engine fire pump set can be put into operation automatically to ensure the normal fire fighting. Compared with the electric fire pump set, the second advantage is that it does not need long-term investment in power supply, saving the mains power supply transformer and normal expenses. Diesel engine fire pumps are equipped with various automatic functions to meet customer requirements, ensure long-term normal standby status of the equipment, and put it into fire fighting work at any time.
The diesel engine fire pump set is also suitable for various emergency backup pump occasions.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-200 mm
Frequency：50 or 60 Hz
Working Pressure：≤1.6 MPa

Flow：250-10000 GPM
Head： 3-16 Bar
Power：11-1000 kw
The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

Flow：80-4000 GPM
Head：3-15 Bar
Power：11-1000 kw
The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

Hand-held diesel engine fire pumps are mainly used for fire safety and fire safety in fire brigades, various professional fire brigades, industrial and mining enterprises, counties, towns, etc. In areas where fire safety vehicles cannot operate, hand-held fire pumps can drain floods and droughts , Green garden watering, power supply system and rationalized machinery and equipment for emergency disaster relief.

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105¡æ.
Series OTS pumps are available for capacities Of 68-18000m3/hr and heads of 70-200m.They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

There are many types of fire-fighting equipment. Fire hydrants and fire extinguishers are the most common types. The other is the fire pump, which is the heart of the fire-fighting system and plays an important role in pressurizing and supplying water to the fire-fighting system. Among the numerous fire pump products, fire pumps can be divided into multi-stage and single-stage fire pumps.

All places need to be equipped with fire-fighting facilities, and fire pumps are necessary water intake equipment for fire-fighting facilities. At least one or two fire pumps are equipped. Our commonly used fire pumps are electric fire pumps and diesel engine fire pumps. The difference between the two is The electric fire pump needs to be supplied by the power system. If the power is cut off, the diesel engine fire pump can be started at any time to make up for the original position of the electric fire pump.

Diesel engine fire pump sets are mainly suitable for fire water supply and foam fire extinguishing systems in petrochemical, natural gas, power generation, cotton and linen textiles, warehouses, airports, docks, high-rise buildings and other industries. It can also be used in occasions such as water ships, offshore oil tankers and fire fighting ships. The unit adopts imported diesel engine and fire pump. It has the characteristics of quick start, reliable water diversion, reasonable power reserve, stable operation, high degree of “three modernizations”, wide range of pressure and flow, etc. It is an advanced and reliable fire-fighting equipment.
Rational use and careful maintenance of the pump set is an important prerequisite to ensure the normal and reliable operation of the pump set, give full play to the emergency function and prolong the service life. In order to make the pump set operators familiar with its structural features, master the use and maintenance methods, and make good use of the pump set, we have compiled this manual for the reference of the set operators.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The Diesel Engine End Suction Fire Pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-200 mm
Frequency：50 or 60 Hz
Working Pressure：≤1.6 MPa

The Diesel Engine with Mixed Flow Pump is an advanced firefighting and rescue equipment. It is suitable for various environments, especially in areas with unstable power supply, where it maintains its peak efficiency. Moreover, this equipment is cost-effective, easy to maintain, and offers long-lasting firefighting assurance.

XA Horizontal end suction Diesel fire pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, easy installation and maintenance.

XA series single-stage centrifugal pump is the earliest single-stage single-suction centrifugal pump product launched by Better (China) Technology Co., Ltd. This product combines the advantages of similar products in China and abroad, and is designed with excellent hydraulic model. Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operation cost of pumps in various applications.

Fire pumps are divided into different types according to different classification methods. Due to their fully sealed, leak-free and corrosion-resistant features, they are widely used in environmental protection, water treatment, fire-fighting and other departments to pump various types of liquids. The ideal pumps for polluting civilized workshops and civilized factories are similar to the pumps for fire protection systems, but the head and flow are different.

The XBC-ZWC Diesel Engine Self-priming Pump is a powerful and versatile solution for various water transfer applications. Designed with reliability and efficiency in mind, this self-priming pump is specifically engineered to handle water transfer tasks with ease. Whether you need to move water from one location to another, drain flooded areas, or supply water for irrigation, the XBC-ZWC Diesel Engine Self-priming Pump is your trusted companion.

It is suitable for the fire protection requirements of high-rise buildings, hotels, commercial buildings, various civil buildings, subways, light rails, railway stations, industrial and mining enterprises and other important departments. Domestic water supply system.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-200 mm
Frequency：50 or 60 Hz
Working Pressure：≤1.6 MPa

Diesel engine fire pumps have a high degree of automation, mainly in automatic start, automatic alarm, automatic charging, automatic preheating, etc., and generally have automatic, manual and fault self-checking functions, and monitor the working conditions throughout the process. The diesel engine fire pump has the functions of remote control and remote transmission control in the central control room. If necessary, it can also have the function of field bus connection. The battery adopts the fully automatic floating charging method to ensure that the battery is in a standby state at any time.

Diesel engine fire pumps are often used for emergency water supply in high-rise buildings, water companies, steel plants, wineries, chemical plants, hotels, hospitals, and other large-scale projects. Diesel engine fire pump is suitable for unattended emergency water supply system. The product has the characteristics of advanced technology, high degree of automation, superior performance, complete protection functions, reasonable structure, simple installation, and high cost performance. net pressure. Diesel engine fire pumps are selected according to different working conditions: single-stage single-suction centrifugal pumps, high-pressure multi-stage pumps, double-suction split pumps, etc.

The XBC-IS Diesel Engine Fire Pump is the ultimate solution for reliable fire protection in a wide range of settings, including factories, commercial buildings, residential areas, public facilities, and even agricultural fields. Designed to meet emergency firefighting needs, this pump ensures a dependable water source and increased water pressure, regardless of the availability of electricity.

Diesel engine split pump has the characteristics of long life, high efficiency, reasonable structure, low operating cost, convenient installation and maintenance, etc. It is an ideal pump for fire fighting, air conditioning, chemical industry, water treatment and other industries.

The fire pumps used in the complete set of diesel engine fire pumps can be the IS series single-stage type, the S series new single-stage two-stage type, and the D-type series segmental multi-stage type produced by our company. The diesel engine fire pumps used in this series of equipment are made of domestic or imported high-quality products. They have the characteristics of good starting characteristics, strong overload capacity, compact structure, convenient maintenance, simple use, and high degree of automation. They are advanced and reliable fire-fighting equipment.

Flow：80-4000 GPM
Head： 3-15 Bar
Power：11-1000 kw
Caliber：65-300 mm
Frequency：50 or 60 Hz
Working Pressure：≤1.6 MPa

Flow：80-4000 GPM
Head：3-15 Bar
Power：11-1000 kw
The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

This diesel fire pump adopts OTS pump, which has large flow and fast speed. The diesel engine fire pump has automatic, manual and fault self-checking functions. It can monitor the working status of the whole process, restore the function of failure start, automatic pre-lubrication and automatic restart of preheating, so that the equipment start-up is safer and more reliable.

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 

·NON-UL  Standard:
Flow：50-5000GPM 
Head： 40-250 PSI 

XBC diesel engine fire pump product head, flow range is wide, can fully meet the warehouse, wharf, airport, petrochemical, power plant, liquefied gas station, textile and other industrial and mining enterprises in various occasions of fire water supply.