Diesel Driven Fire Pump

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The Diesel Engine End Suction Fire Pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more.

Flow :1500~6000 gpm
Head: Less 150 m
Speed: 1500rpm

Standard:
       UL    Flow：50-2000 GPM    Head： 80-250 PSI 
       NON-UL   Flow：50-5000GPM   Head： 40-250 PSI 

The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

       The operation of the Fire Pump Set

     Operation of diesel engine fire pump

     Diesel engine fire pump operation:Start, Stop and Run of the Equipment

Start: first make sure of the correct rotatingdirection of the fire fighting pump and the inlet valve is as N.O and outletvalve N.C. Before the pipe network starts with no water. After no error is found, start the fire-fighting pump and, when the pump gets stable run, gradually open the outlet valve and adjust it to the work condition point for the pump to run. The outlet valve is N.O. when the network is filled with water at usual.
Run: when the pump gets a normal run, check the shaft seal and the bearing to see how it works. Theleakage for themechanical seal should not be over 3 drops/min and for the stuffing seal should be dot drop. The bearing’s temperature should not be over 75℃ and its temperature rise not over 35℃ Stop running for a checking case of an abnormal sound during the pump’s run.
To stop, first close the outlet valve, then the diesel engine.

Experience efficient fluid transfer with the XBC-XA Diesel End Suction Pump. With its unique end suction design and powerful diesel engine, this pump offers reliable performance and exceptional pumping capacity. It is suitable for a wide range of applications, from industrial fluid transfer to fire protection systems. The XBC-XA Diesel End Suction Pump features automatic operation, advanced control systems, and automatic fault detection for added safety and convenience. Choose this versatile pump for reliable and efficient fluid transfer in various industries.

XBD, XBC electric fire pump units and diesel engine fire pump units meet the national standards GB6245-1998 “Fire Pump Performance Requirements and Test Methods”, GB/T1147-1987 “General Technical Conditions for Internal Combustion Engines”. They can be equipped with ISG, IS, S, D and other pump types respectively, forming various structural types such as pipeline type, vertical multi-stage, horizontal single-stage cantilever type, horizontal split, horizontal multi-stage, etc., to be suitable for various working conditions Use under different conditions (different power, different speed, different materials, etc.).

XBD and XBC units are mainly suitable for fire protection engineering of steel, metallurgy, electric power, petroleum, chemical industry, construction, port and other operations, emergency water supply for blast furnace, continuous casting, converter and other accidents, power plant emergency water supply for power failure, nuclear reactor safety protection cooling water supply, And other water supply projects that require automatic control.

Flow：250-10000 GPM
Head： 3-16 Bar
Power：11-1000 kw
The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

The diesel engine-powered water pump of the fire pump set is composed of horizontal centrifugal pumps, diesel engines, electrical instruments and other equipment, which are tightly installed on a common chassis, and connected with the electric control box through control lines and signal lines. The complete set of water supply equipment for diesel engines can be used in various enterprises. The production of automatic/manual water supply systems can also be used for fire water supply and occasions with special requirements.

Diesel engine multi-stage fire pump set is in accordance with the national standard GB6245-2006 “Fire Pump Performance Requirements and Test Methods”. This series of products has a wide range of head and flow rate, which can meet the fire water supply in various occasions of industrial and mining enterprises such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas stations, and textiles. The advantage is that the electric fire pump cannot be started after the power system of the building suddenly loses power, and the diesel engine fire pump is automatically started and put into emergency water supply.

Electric fire pumps are used in various water environments, not only to meet the general water supply but also to be a good helper for fire-fighting water. The electric motor fire pump is manufactured with good structure and workmanship. It has a wide range of performance, and is easy to use and operate for a long time. The electric fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.

Flow：80-4000 GPM
Head：3-15 Bar
Power：11-1000 kw
The Diesel Single-stage Single-suction Fire Pump is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the Diesel Single-stage Single-suction Fire Pump delivers dependable performance to safeguard lives and properties from fire risks.

XBC diesel engine fire pump product head, flow range is wide, can fully meet the warehouse, wharf, airport, petrochemical, power plant, liquefied gas station, textile and other industrial and mining enterprises in various occasions of fire water supply.

Flow：2000 GPM
Head：12Bar
The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

Diesel engine fire pump set is a new type of fire-fighting equipment developed by our company in strict accordance with the national standard GB6245-98 “Fire Pump Performance Requirements and Test Methods” and the American Fire Protection Association standard NEPA20 “Installation of Centrifugal Fire Pumps” and other standards (hereinafter referred to as equipment ), this series of equipment can be divided into three sub-series, XBC-IS, XBC-S, XBC-D, etc. The equipment has a wide range of pressure and flow, and its application can almost meet various occasions required by fire protection.

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105℃.
Series OTS pumps are available for capacities Of 68-18000m3/hr and heads of 70-200m.They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The XBC-ISO pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more.

The self-priming pump is a kind of water pump. The difference from other pumps is that it can separate water and gas by itself, form a negative pressure inside, and fill the diversion water. Before the new pump is used, a little water should be poured into the pump body, which is conducive to the rapid separation of steam and water. In addition, the installation position should be careful not to exceed its suction stroke.

The national standard name of diesel engine fire pump is “engineering diesel engine fire pump set”, and the XBC diesel engine fire pump set is the latest national standard GB6245-2006 “fire pump performance requirements and test methods”. This series of products has a wide range of lift and flow, and can fully meet the fire water supply in various occasions such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas stations, textiles and other industrial and mining enterprises.

The XBC-D Diesel Engine Fire Pump serves as an essential firefighting tool across different industries and sectors, including manufacturing plants, warehouses, commercial complexes, residential buildings, and more. Its versatility and reliability make it an ideal choice for protecting lives and property.

The main advantage of the hand-held diesel fire pump is the high lift, which can reach 90 meters. It is generally used for fire emergency fire prevention, forest emergency fire prevention, and factory fire protection. When the diesel engine fire pump is working, the auxiliary impeller is together with the pump main shaft Rotating, the liquid in the auxiliary impeller will also rotate together, and the rotating liquid will generate an outward centrifugal force. On the one hand, this centrifugal force resists the liquid flowing to the mechanical seal, reducing the pressure at the mechanical seal. On the other hand, it prevents the solid particles in the medium from entering the friction pair of the diesel engine fire pump seal, reduces the wear of the mechanical seal grinding block, and prolongs its life. The auxiliary impeller of the diesel engine fire pump can not only play a sealing role, but also reduce the axial force. In the diesel engine fire pump, the axial force is mainly caused by the pressure difference force of the liquid acting on the impeller and the gravity of the entire rotating part. The direction of action of these two forces is the same, and the resultant force is formed by the addition of the two forces.

The national standard name of the diesel engine fire pump is “engineering diesel engine fire pump group”, and the national standard model is XBCL/Q where L is the lift value and Q is the flow value. XBC diesel engine fire pump set is the latest according to the national standard GB6245-2006 “fire pump performance requirements and test methods”. This series of products has a wide range of lift and flow, and can fully meet the fire water supply in various occasions such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas stations, textiles and other industrial and mining enterprises.

Generally speaking, we recommend that where natural ventilation is used to install diesel engine fire pumps, there must be vents and exhaust ports of sufficient size, and the position of the vents ensures that there is enough fresh air to supply the diesel engine for combustion within the temperature limit. Of course, the water supply radiator can also be used to take away the heat of the circulating cooling water and the heat emitted from the surface of the unit. If the space cannot meet the requirements of natural ventilation and cannot effectively dissipate heat, it is recommended that you adopt forced ventilation, install an intake fan and an exhaust fan at the vent, and choose a location that can provide enough cold air for the diesel engine and take away the machine room hot air inside. Generally speaking, the air intake of the unit should be 6-7 times that of the diesel engine. Only in this way can normal ventilation be ensured and the operating efficiency of the equipment can be improved.

In addition, it must be fixed firmly so that the entire unit can be supported to ensure that the unit is in a horizontal state and absorb vibration. Generally speaking, the foundation of the unit adopts a concrete structure. The length and width are 150-250mm on one side of the length and width of the unit chassis, and the depth is 300-600mm. The height of the anchor bolts should be about twice the bolt diameter. And there should be a 750mm channel on both sides and front of the unit to facilitate the operator’s inspection and general maintenance.

The casing of the diesel engine fire pump constitutes the working chamber of the pump. The impeller, shaft and rolling bearing are the rotors of the pump. Suspension bearing parts The supporting parts support the rotor parts of the pump, and the rolling bearings are subjected to the radial and axial forces of the pump. In order to balance the axial force of the diesel engine fire pump, most pumps have sealing rings at the front and rear of the impeller, and a balance hole on the back cover of the impeller. Because some pumps have little axial force, there is no seal on the back of the impeller. ring and balance hole. The axial sealing ring of the diesel engine fire pump is composed of packing gland, packing ring and packing to prevent air intake or large water leakage.

Fire pumps are used in the equipment of the fire protection system. Their function is to increase the pressure to supplement the water source, so as to achieve the purpose of extinguishing the fire. Moreover, the equipment adopts high-tech means and introduces advanced technology, which has incomparable advantages over other products.

The XBC-OTS Diesel Engine Fire Pump is an essential equipment in firefighting systems, designed to meet emergency firefighting needs. Whether during power outages or in the absence of electricity supply, it provides reliable water supply and increases firefighting water pressure to ensure smooth firefighting operations.The XBC-OTS Diesel Engine Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

Diesel fire pump systems consist of several key components, including the diesel engine, pump assembly, fuel system, cooling system, control panel, and associated piping, valves, and fittings. Each component plays a crucial role in the operation and performance of the fire pump system, and regular maintenance and inspection of these components are essential to ensure reliable operation during emergencies.

The hand-held fire pump is mainly suitable for fire fighting in fire rescue departments, professional fire brigades, industrial and mining enterprises, counties, villages and towns, etc. It is more advantageous in areas where fire-fighting vehicles cannot pass. The hand-held fire pump can also drain water, fight drought, and green Ideal equipment for irrigation, water supply and emergency disaster relief.

Split case diesel engine fire pump combines the features of a split case fire pump with the reliability and independence of a diesel engine-driven system. This configuration is commonly used in applications where a dependable source of power is crucial to maintain fire protection capabilities during power outages or in remote locations. Here are the key features of a split case diesel engine fire pump:

The XBC-JC Diesel Engine Driven Vertical Turbine Fire Pump is a reliable and efficient hydraulic solution designed for extracting water from deep wells and hot springs. With its unique long shaft design and advanced technology, this pump delivers powerful pumping capacity and lift height, swiftly transporting large volumes of water to desired locations. Its compact structure makes it suitable for various complex working environments, including construction sites and agricultural irrigation. Equipped with an automatic start-stop function, the XBC-JC pump intelligently controls its operation, saving energy and reducing maintenance costs. It finds versatile applications in firefighting, urban water supply systems, and hot spring facilities, providing dependable hydraulic support for smooth operations.