Diesel engine fire pump

The national standard name of diesel engine fire pump is “engineering diesel engine fire pump unit”, and the national standard model is xbcl / Q, where l is the lift value and Q is the flow value. XBC diesel engine fire pump unit is the latest national standard GB6245-2006 fire pump performance requirements and test methods. This series of products has a wide range of lift and flow, and can fully meet the fire water supply for various occasions of industrial and mining enterprises such as warehouses, docks, airports, petrochemical, power plants, liquefied gas stations, textiles, etc.

Diesel engine fire pump, as a fixed fire extinguishing equipment, has been widely used in fire diversion, especially in the case of no power supply or abnormal power supply and other emergencies, other diesel engines can also be equipped as power engines according to the needs of users.

Diesel engine fire pumps are relatively common in life, and their performance requirements are relatively high. In ordinary use, more attention should be paid to maintenance, so as to prolong the service life of the pump. Because diesel fire pumps are not omnipotent, there will be some problems in daily use, so when choosing equipment, we must pay attention to whether the quality of the equipment meets the national standards. As fire equipment, all kinds of equipment must be To ensure performance, avoid affecting use in disaster situations and delaying rescue.

Diesel engine hand-lift portable fire pump has the characteristics of strong power, large torque, stable operation, reliable quality, large flow, high lift and long service life. This equipment is suitable for fire fighting, drainage irrigation, alpine sprinkler irrigation, etc. It is a necessary emergency rescue fire fighting and disaster relief mobile fire pump for fire brigade, factories, properties, forest areas, mining, village committees, etc.

Diesel engine vertical turbine fire pump, consisting of vertical turbine pump, diesel engine and gearbox

The diesel engine fire pump has automatic, manual and fault self-checking functions. It can monitor the working status of the whole process, restore the function of failure start, automatic pre-lubrication and automatic restart of preheating, so that the equipment start-up is safer and more reliable. It has the functions of central control room remote control, remote control and field bus connection. Diesel engine fire pump is easy to use, equipped with remote instrument and instrument, which can be connected to the control center as needed, easy to install and use, and easy to maintain.

The diesel dual power pump unit is composed of a diesel pump and a jockey pump. When it is in daily work, jockey pump starts normally as low power to maintain the flow of water in the pipeline, and the diesel pump stops working. When a fire occurs, the diesel pump will start within ten seconds to control the spread of the fire. Ensure building safety.

Diesel engine fire pump
Power: 22kw
Capacity: 10L/S
Head: 8bars

The flow rate of ordinary diesel pump is generally low, and sometimes it can not meet the requirements of customers. Nowadays, the diesel pump with large flow rate has been developed. It uses double suction ports, which is twice the flow rate of ordinary diesel pump. Moreover, the structure is more reasonable, the NPSH is small, and it is more durable,

Self priming irrigation pump, the whole pump body is light and can be moved by one person. It is simple to install and can be used for pumping irrigation immediately. Centrifugal self-priming principle is adopted. Water or liquid is pumped into the diesel engine to form kinetic energy and generate energy to complete the work.

Diesel engine fire pump set adopts OTS fire pump. It has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. For conveying clean water or other liquids with physical and chemical properties similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump flow parts, the sealing form and increasing the cooling system.

XBC-D diesel engine fire pump set is suitable for fire water supply and emergency water supply in warehouses, docks, airports, petroleum, chemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions.

780GPM DIESEL ENGINE PUMP FINISH PRODUCT

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105¡æ.
Series OTS pumps are available for capacities Of 68-18000m3/hr and heads of 70-200m.They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

1. Automatic start: After the diesel engine pump unit receives a fire alarm/pipe network pressure/power failure/or other start-up signals, it can start automatically within 15 seconds and be put into full-load operation;
2. Automatic charging: the battery can be automatically charged by the mains or diesel engine charging motor to ensure the smooth start of the unit;
3. Automatic alarm: automatic alarm protection for diesel engine low oil pressure, high water temperature and other faults, and alarm and stop when the speed is exceeded again;
4. Automatic preheating: keep the diesel engine in a hot standby state to ensure emergency work;
5. Direct connection type: The diesel engine pump unit below 360kw adopts the first domestic direct connection technology between the diesel engine and the water pump through the elastic coupling, which reduces the failure points, greatly shortens the starting time of the unit, and increases the reliability and emergency performance of the unit ;
6. Users can also request to set other alarm outputs (non-standard supply);
7. With telemetry, remote signaling and remote control functions (non-standard supply);
8. The equipment is powered by X6135, 12V135, 4102, 4105, 6102 and other series diesel engines. The diesel engine (with clutch) is connected with the fire pump through a highly elastic coupling to form a fire pump group. Fans, control panels (for automatic units) and other components.
9. When it is an automatic control unit, the split diesel engine automatic control cabinet (programmable) realizes the automatic start, input and automatic switching of the system (the electric pump group is switched to the diesel engine pump group or the diesel engine pump group of this group is switched to another group. Diesel unit), automatic protection (diesel engine overspeed, low oil pressure, high water temperature, three start failures, low oil level, low battery voltage and other alarm shutdown protection) and other functions, and can also interface with the user’s fire center or automatic fire alarm device, Realize remote monitoring.
10. In order to ensure the normal operation of the unit in an environment below 5°C, the unit can be equipped with an AC220V cooling water preheating heating device.
11. Diesel engine fire pump can form an automatic fire water supply system with electric pump group, stabilized pump, etc.
There are two water inlet methods for fire pumps: self-irrigation and suction. According to the requirements of fire protection regulations, it is generally self-irrigation. If the user needs to absorb two kinds of water, according to the requirements of fire protection regulations, it is generally the method of self-irrigation and water diversion. If the user needs to suck up the water inlet system, special instructions are required so that the company can provide an automatic vacuum water diversion device, but the size of the pump set has changed.

Diesel engine fire pump XBC-D equipment is powered by X6135, 12V135, 4102, 4105, 6102 and other series diesel engines. The diesel engine (can be equipped with a clutch) is connected with the fire pump through a highly elastic coupling to form a fire pump group. The unit also includes a diesel tank. , cooling water tank, fan, control panel (for automatic units) and other components.

Centrifugal End Suction Pump Is A Single Stage, Single Suction Pump For Pumping Clean Water And The Other Liquids Physically And Chemically Similar To The Clean Water. This Pump Is Suitable For Public Water Supply And Drainage Duties In Industries And Land Irrigation Also In Agriculture.

Flow: 5~80L/s
Head: 20m~80m
Working Pressure: ≤1.0MPa

Automatic diesel pump unit: diesel water pump, jockey pump, strong steel base, radiator (heat exchanger), battery, battery wire, gate valve, check valve, flexible joint, automatic control panel.

Diesel engine fire pump has the advantages of light weight, small size, flexible movement, quick start, fast water discharge time, large fuel tank capacity, corrosion resistance, reliable use, convenient maintenance, etc., fast automatic start and self-priming, and self-priming after dry operation, Heavy-duty pump bearing, longer life; other components are selected from high-quality copper and stainless steel or by customer.

Diesel engine pump with controller
This is 350gpm 6bar engine pump
We use Quanchai brand engine

The vertical turbine fire pump is circulating water pump, and its over-flow medium is sea water. The function is to provide flushing water for the drum-type rotating filter to ensure that impurities and sea creatures can be washed away in time, thus bring clean seawater downstream.

The national standard name of diesel engine fire pump is “diesel engine fire pump unit for engineering”

The national standard model is xbcl / Q, where l is the lift value and Q is the flow value.

XBC diesel engine fire pump unit is the latest national standard GB6245-2006 fire pump performance requirements and test methods. This series of products has a wide range of lift and flow, and can fully meet the fire water supply for various occasions of industrial and mining enterprises such as warehouses, docks, airports, petrochemical, power plants, liquefied gas stations, textiles, etc.

The product has the characteristics of good startup, strong overload capacity, compact structure, convenient maintenance, simple use and high automation. It is a fire-fighting equipment with reliable performance.

Operating conditions:

1. Sea level: ≤ 2500 m

2. Ambient temperature: – 25 ～ 55 ℃

3. Relative humidity of air: 9-95%

4. Seismic intensity: 7 degrees

Performance range:
1. Diameter: 65~300mm
2. Flow range: 5~180L/s
3. Pressure: 1.0~2.4MPa
4. Supporting power: 20~630kW
5. Working pressure: ≤2.5MPa
Applicable scene:
1. High-rise hotels, super-high public places
2. High-rise office buildings, high-rise residential buildings
3. Chemical, oil refining, metallurgy and other enterprises
4. Energy, pharmaceutical and military industries

Split case design permits easy dis-assembly, that is, inspection is simplified, it is not necessary to disturb pump alignment and suction & discharge piping when parts replacement is necessary. Double suction with advanced design of suction performance ensures high suction lift even with large capacity. Pump operation with low noise and stability, in use ensure comfortable environment. Variable combination of materials permit wide application. Drive shaft end of the pump optionally on the left or right. Shaft seal uncooled soft- packed stuffing box or uncooled single acting unbalanced mechanical seal, etc.

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105C¡£
Series OTS pumps are available for capacities Of 68-18000m3/hr and heads of 70-200m.They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

Portable pump, mostly used for irrigation and port dock pumping water. Is a small diesel pump, now many countries began to use a large range of portable diesel pump, because the diesel pump is not affected by the power system, can work in an electric environment, and portable diesel pump is easy to install and move, is favored by the majority of customers.

Diesel engine fire pump is mainly composed of diesel engine, fire pump, coupling, fuel tank, radiator, battery pack, intelligent automatic control panel, etc. Better Technology Group Co., Ltd. has strong technical force, rich production experience and perfect testing methods to ensure the stability and reliability of product quality.

The diesel engine fire pump has automatic, manual and fault self-checking functions. It can monitor the working status of the whole process, restore the function of failure start, automatic pre-lubrication and automatic restart of preheating, so that the equipment start-up is safer and more reliable. It has the functions of central control room remote control, remote control and field bus connection. Diesel engine fire pump is easy to use, equipped with remote instrument and instrument, which can be connected to the control center as needed, easy to install and use, and easy to maintain.??