Diesel Fire Pump With Control Cabinet

The fire safety hand-held mobile fire pump has the characteristics of high power, light weight, simple structure, convenient use and maintenance, and quick start. The water supply equipment is part of the work of the hand pump, and the hand lift frame is the support of the whole equipment. When in use, drag the joystick to the horizontal direction to extend the pump. Because the hand-held fire pump is light and handy, it will not be restricted by traffic, power engineering, and regions. It has been widely used to extinguish fires in industrial and mining enterprises, warehouses, seaports, ports, and villages. or incipient fire incidents in areas not immediately accessible.The fire safety hand-held mobile fire pump has the characteristics of high power, light weight, simple structure, convenient use and maintenance, and quick start. The water supply equipment is part of the work of the hand pump, and the hand lift frame is the support of the whole equipment. When in use, drag the joystick to the horizontal direction to extend the pump. Because the hand-held fire pump is light and handy, it will not be restricted by traffic, power engineering, and regions. It has been widely used to extinguish fires in industrial and mining enterprises, warehouses, seaports, ports, and villages. or incipient fire incidents in areas not immediately accessible.

Diesel multi-stage fire pump group is composed of diesel engine and fire pump, the pump group form is multi-stage fire pump. It has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. This product can transport clean water or other liquids with physical and chemical properties similar to water.

-UL Standard:
Flow：100-3000 GPM   
Head： 90-250 PSI 
– NON-UL Standard:
 Flow：100-10000GPM   
Head： 40-250 PSI 

It can be started without electricity to replace the electric pump to complete the work，The viscosity is higher than that of gasoline, which is not easy to evaporate and saves fuel.The pressure and flow range of the equipment can meet the needs of all fire-fighting occasions.

Diesel engine fire pumps are mainly used in flood control and emergency municipal engineering, farmland irrigation, urban water supply and drainage, fire water supply, hydropower engineering, metallurgy, mining, petroleum, chemical and other industries, and play an important role in flood control and emergency conditions. A diesel engine fire pump is a machine that transports liquids or pressurizes liquids. It transmits the mechanical energy of the prime mover or other external energy to the liquid to increase the energy of the liquid. It is mainly used to transport liquids including water, oil, acid and alkali, emulsions, suspoemulsions and liquid metals, etc., and can also transport liquid and gas mixtures. and liquids containing suspended solids. The technical parameters to measure the performance of the pump include flow rate, suction lift, lift, shaft power, water power, efficiency, etc.; according to different working principles, it can be divided into positive displacement pumps, vane pumps and other types. Positive displacement pumps use the change in the volume of their working chambers to transfer energy; vane pumps use the interaction between rotating blades and water to transfer energy, and there are centrifugal pumps, axial flow pumps and mixed flow pumps.

The multistage pump has high efficiency, corrosion resistance, reliable operation and other performances. The pump body has strong bearing capacity, strong anti-overload ability, and relatively sensitive start-up. First of all, the multistage pump has the characteristics of compact structure, the distance between parts is small, and the volume is small. The operation of the equipment is stable, the service life is long, and the vibration generated during operation is small, so the practical life of the equipment is relatively long.

Diesel engine fire pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. This diesel engine pump set can transport clean water or other liquids whose physical and chemical properties are similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump’s flow parts, sealing form and adding a cooling system.

The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

XA Horizontal end suction Diesel fire pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, easy installation and maintenance.

XA series single-stage centrifugal pump is the earliest single-stage single-suction centrifugal pump product launched by Better (China) Technology Co., Ltd. This product combines the advantages of similar products in China and abroad, and is designed with excellent hydraulic model. Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operation cost of pumps in various applications.

The Vertical Single stage fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-400 mm
Frequency：50 or 60 Hz

XBC series fully automatic diesel engine fire pump set has been widely used as a fixed fire extinguishing equipment for fire diversion, especially for fire water supply under unexpected circumstances such as no power supply or abnormal power supply (mains power). The fire pump equipped in the unit is a horizontal single-stage and multi-stage fire-fighting special pump. It is mainly composed of diesel engine, fire pump, connection device, fuel tank, radiator, battery pack, intelligent automatic control panel, etc.

The diesel engine fire pump has automatic, manual and fault self-checking functions. It can monitor the working state of the whole process, restore the function of failure start, automatic pre-lubrication and automatic restart of preheating, so that the equipment start-up is safer and more reliable. It has the functions of central control room remote control, remote control and field bus connection. The battery is fully automatic floating charge (constant current, constant voltage, trickle charge) mode to ensure that the battery is in a standby state at any time. Diesel engine fire pump is easy to use, equipped with remote instrument and instrument, which can be connected to the control center as needed, easy to install and use, and easy to maintain.

Electric fire pumps are used in various water environments, not only to meet the general water supply but also to be a good helper for fire-fighting water. The electric motor fire pump is manufactured with good structure and workmanship. It has a wide range of performance, and is easy to use and operate for a long time. The electric fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.

Diesel emergency fire pumps are suitable for pressurized water supply in fire pipelines. Or it is used to transport clear water or other liquids with physical and chemical properties similar to clear water for pressurization. The temperature of the medium does not exceed 80°C. It is suitable for industrial and urban water supply and drainage, pressurized water supply for high-rise buildings, garden sprinkler irrigation, long-distance water supply, heating, bathroom and other cold and hot water cycle pressurization and equipment matching.

Multistage pumps are designed to transfer cleaning liquids through multiple impellers in series instead of one, and are typically used in installations that require high lift. High pressure applications can be achieved by mounting the impellers on the same shaft of the multistage pump or on opposite shafts parallel to each other for higher flow rates. They are mainly used for energy saving and different range of flow/head situations.

The small diesel engine fire pump adopts the direct connection technology between the domestic diesel engine and the water pump through the elastic coupling, which reduces the failure points, greatly shortens the start-up time of the unit, and increases the reliability of the unit. The structure of the pump should ensure easy on-site maintenance and replacement. Parts, fasteners and self-locking devices should not be loose due to vibration and other reasons.

1. When a fire occurs, the power supply fails and the electric fire pump unit cannot be put into use normally, the diesel engine fire pump unit can be automatically put into operation to ensure the normal firefighting.
2. There is no need for long-term investment in power resources, saving commercial power supply transformers and normal expenses.

The diesel engine fire pump set is equipped with various automatic functions to meet the requirements of national standards and ensure the equipment is in a normal standby state for a long time, and can be put into fire fighting work at any time.

The multistage pump has the advantages of high efficiency, reliability, durability, low noise, convenient maintenance and wide application range. D series single-suction multistage centrifugal pumps are widely used in high-rise buildings, fire protection, boiler feed water, high-pressure cold and hot water circulation of cooling water systems, parallel booster pump water supply systems and various irrigation fluid transportation. It is used to transport water or similar physical and chemical liquids with no solid particles and a temperature below 80 °C. Our factory’s products are all tested before leaving the factory to ensure that there are no quality problems.

The diesel engine fire pump set is a medium and low pressure fire pump product developed by our company in strict accordance with the technical requirements of the national standard GB6245-2006 (fire pump) and the National Fire Protection Association NFPA20 (installation of centrifugal fire pumps). The product has passed the type inspection of the National Fixed Fire Extinguishing System and Refractory Component Quality Inspection Center.

Diesel engine fire pump set is a new type of fire-fighting equipment developed by our company in strict accordance with the national standard GB6245-2006 “Fire Pump Performance Requirements and Test Methods” and the American Fire Protection Association standard NEPA20 “Installation of Centrifugal Fire Pumps” and other standards (hereinafter referred to as equipment ), this series of equipment can be divided into three sub-series, XBC-IS, XBC-S, XBC-D, etc. The equipment has a wide range of pressure and flow, and its application can almost meet various occasions required by fire protection.

The diesel engine equipped with the equipment is made of domestic or imported high-quality products. It has the characteristics of good starting characteristics, strong overload capacity, compact structure, convenient maintenance, simple use, and high degree of automation. It is an advanced and reliable fire-fighting equipment.

The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

Flow：50-7500 GPM
Head：3-20 Bar
Power：11-1000 kw
The Diesel Engine Vertical Turbine Fire Pump has a wide range of applications, making it suitable for extracting water from deep wells and hot springs. Whether it’s for firefighting, urban water supply systems, or hot spring facilities, it delivers reliable hydraulic support, ensuring smooth operations.By choosing the Diesel Engine Vertical Turbine Fire Pump, you gain a trustworthy equipment that guarantees efficient extraction of water from deep wells and hot springs.

XBC-D Diesel Fire Pump Set is a versatile and reliable firefighting solution designed for a wide range of applications. Whether it’s industrial facilities, commercial buildings, residential complexes, or public infrastructure, the XBC-D Diesel Fire Pump Set ensures effective fire protection. With its robust design and advanced features, this pump set is ready to tackle emergencies and safeguard lives and properties in various firefighting scenarios.

XBC series diesel double suction pump, large diesel flow pump set, adopts new type double suction pump + diesel engine + automatic control system (optional) combination of diversified and efficient, superior performance, safe and stable operation, low noise, energy saving and environmental protection, Easy installation and maintenance, long service life. The technical level has reached the domestic leading large flow. XBC series diesel double suction pump is mainly used for irrigation, municipal drainage, fire fighting, etc.

Flow：250-10000 GPM
Head： 3-16 Bar
Power：11-1000 kw
The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

Flow：250-10000 GPM
Head： 3-16 Bar (40-232 psi )
Power：11-1000 kw
Caliber：25-500 mm
Frequency：50 or 60 Hz
Working Pressure：≤2.5 MPa
The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

This diesel engine fire pump set adopts ISW pump.ISW series horizontal single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly horizontal centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps.

In addition, according to different operation temperatures and mediums, we developed the hot-water pump(ISWR), corrosion-resistant chemical pump(ISWH) and oil pump (ISWB). This pump enjoys excellent performance, good reliability, long operation life, reasonable construction and nice appearance, which is outstanding in the industry.

Diesel engine fire pump is a common and necessary facility. Only when the fire signal comes, and the electric water pump fails or the power supply is cut off, the diesel engine fire pump will automatically start. Diesel engine fire pump is installed together with electrical instruments, with complete functions, compact structure, automatic fault alarm, receiving start signal, and can automatically complete the start-up procedure and fast full-load operation. , Enough to ensure that the diesel engine fire pump is started in a low temperature environment, the whole system of the diesel engine fire pump is safe, reliable, and easy to use.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-400 mm
Frequency：50 or 60 Hz