DJ Fire Pump Display

The fire pump can be installed in multiple ways according to the on-site use conditions. And depending on the flow and head requirements, the required flow and head are increased in parallel and series. The bearing adopts low-noise closed bearing, which has been injected with grease before leaving the factory, which can ensure continuous operation for more than two years, and the components have high concentricity. The pump impeller has good performance. Dynamic balance, no vibration in operation, and improved use environment. The pump shaft seal is a mechanical seal, which solves the serious leakage of conventional centrifugal pump packing, increases the service life, and ensures that the operating site is clean and tidy.

The parts that may cause friction when the pump rotates are all made of wear-resistant, corrosion-resistant and high-anti-seize material combinations to ensure reliable operation, reduce noise, and avoid rust water, blocking spray and other fire-fighting devices, extending service life and after shutdown. Rust bite phenomenon.

Fire pumps have a wide range of uses. In addition to providing water for fire-fighting piping systems, they can also be used for industrial water delivery. Fire pumps can also be used for water supply and drainage systems in cities. There are other relatively long-distance water delivery tasks, such as heating boilers, hot and cold water circulation pressurization of bathroom boilers, etc., which can all be completed by means of fire pump systems.

Fire pumps used in different fields have different professional characteristics. For example, fire pumps in the general sense are installed on professional fire trucks or other special fire-fighting facilities, and are used to transport water and foam solutions for fire-fighting Pump.

Double power fire pump product advantage is that when a fire occurs, a more reliable way to ensure water safety, in the normal power supply when the electric pump group into work, when the power supply failure, the electric fire pump can not be normally put into use, the diesel fire pump group can automatically put into operation to ensure the normal fire fighting.

The diesel engine fire pump needs to be aimed at the occasion of large flow and high head fire water material supply, and it has good characteristics of the starting system for diesel automobile engines, fast starting development speed, strong overload capacity, no need for standby operation, and effective energy saving. Diesel engine firefighting pumps have complete performance and a wide range. Single-stage single-suction pumps, multi-stage single-suction pumps, self-priming pumps, long-axis pumps and other pumps can be used, and they can also be used in combination and in parallel. The flow and pressure ranges are wide. Diesel fire-fighting pumps are widely used in fire-fighting system water supply in various occasions of industrial and mining production enterprises such as data warehouses, docks, airports, petrochemicals, and power plants.

The EEJ fire pump set consists of two electric pumps + one jockey pump, which is suitable for fire protection occasions such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas, textiles, ships, and oil tankers.

Small flow fire pump unit, small volume, large space utilization rate, simple installation, long service life, exquisite appearance, and low price, is the best choice for many customers.

This group of fire pumps consists of two electric pumps + one jockey pump, and the motors are connected to multistage pumps.

A single-stage fire pump has only one impeller, and a multistage fire pump can have two or more impellers, which can achieve a larger lift at the same flow rate. Generally, it can be used as an industrial pump, a domestic pump and a fire pump.

diesel fire pump set, also known as a diesel engine-driven fire pump, is a type of fire pump system used for fire protection in buildings, facilities, and industrial settings. It is designed to provide water at high pressure and flow rates to fire sprinkler systems, standpipe systems, and other fire protection equipment in the event of a fire emergency. Diesel fire pump sets are an essential component of fire protection systems, especially in areas with unreliable or insufficient electric power supply.

Suction and Discharge Connections: The fire pump has dedicated suction and discharge connections for the water supply and the distribution system, respectively. The suction connection draws water from a water source such as a reservoir or hydrant, while the discharge connection delivers the pressurized water to the fire protection system.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, the impeller, the pump shaft, the bearing, the coupling, the sealing form, the lifting pipe, etc. The specific fire pump model is determined according to the environment and performance requirements. According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

Large EDJ fire pumps
Reliable because of professionalism, specializing in the production of industrial fire pumps for 20 years, to provide you with the best quality and most intimate service.
if you are interested in our pumps, welcome to contact us!

EJ dual-power fire pump group is used for various fire hydrants and sprinkler fire main pumps; it can more reliably ensure water safety in the event of a fire. EJ dual-power fire pump set is designed and manufactured by Beide Technology Co., Ltd. in accordance with GB 27898.5-2011 Fixed Fire Water Supply Equipment Part 5 <>. It meets the new 3CF requirements and has obtained 3CF certification for fire protection products. EJ small dual-power diesel engine fire pump is used for various fire hydrants and sprinkler fire main pumps; it is suitable for various fire boosting and pressure stabilizing pump occasions; various villas, residential areas and other fire protection systems; industrial and civil building fire protection systems ;Applicable to various oil depots, oil loading and unloading docks, logistics parks and other places with high fire protection requirements.

1. The performance of the fire pump should meet the flow and pressure requirements of the fire water supply system.
2. The power of the driver equipped with the fire pump should meet the requirements of the power required for operation at any point on the performance curve of the selected pump’s flow and lift.
3. When a motor-driven fire pump is used, a dry-installed fire pump with the motor should be selected.
4. The fire pump should be installed dry, and the pump should be placed outside the pool, and the submersible pump cannot be directly placed in the water for water absorption.

The 1000GPM 12Bar Split Case Fire Pump System finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

1. High power capacity: Fire pump control cabinets are designed to provide a higher power capacity, allowing the system to handle larger loads.

2. Easy installation: Fire pump control cabinets are designed to be easy to install and configure, allowing the pump to be installed quickly and efficiently.

3. Protection: Fire pump control cabinets are designed to provide protection to the electrical components from moisture and other environmental factors.

4. Monitoring: Fire pump control cabinets are equipped with monitoring systems to monitor the performance of the system and alert the user if any issues arise.

5. Alarm system: Fire pump control cabinets are equipped with an alarm system that can alert the user if the system fails or if the pressure drops to a dangerous level.

6. Cost-effective: Fire pump control cabinets are designed to be cost-effective and provide the necessary protection and performance for a facility.

Diesel engine fire pumps are large-scale fire pumps. Diesel engine fire pumps are currently the hottest fire pumps on the market, especially in large warehouses, docks, airports, petrochemicals, power plants, and liquefied gas stations. This kind of fire pump with large flow and high power is often needed.

The diesel engine fire pump has the advantages of long head and wide application range, and can meet the fire water supply in multiple places such as warehouses, docks, airports, power plants, liquefied gas stations, and petrochemical industries. This type of diesel engine fire pump set has good starting performance, compact structure, humanized design, convenient maintenance, simple and convenient use, and high degree of automation. It is a very good fire pump.

Diesel engine fire pump, as a fixed fire extinguishing equipment, has been widely used in fire diversion, especially in the case of no power supply or abnormal power supply and other emergencies, other diesel engines can also be equipped as power engines according to the needs of users.​​

fire pump system assembly now! which consist of electric fire pump, diesel engine fire pump and jockey pump, with booster pump system

Setting up the fire pump control system correctly is crucial to ensure the pump operates efficiently and reliably during emergencies. Here are the general steps to set up the fire pump control

Flow: 30-9000GPM
Head: 3-20Bar
Speed: 740-2900r/min
Frequency: 50 HZ or 60 HZ

The ED Fire Pump Set combines electric and diesel engine pumps to ensure uninterrupted fire protection and a reliable water supply.
In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants,oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

Product Advantages:

1.Reliable
It can run in the condition of power cut.
It can fully run in 15 seconds after the start signal.
Use Universal Joint, high transmission efficiency. good stability, vibration proof.

2.Economic
Jockey pump and pressure vessel can save some electric power.
Convenience:It can be remote controlled by App in phones.

3.Professional Technological
Motor pump is duty pump, diesel engine is for standby
Completely automatic control panel.
Suitable for any emergency firefighting occasions.
Customized product.

The EDJ （Diesel Pump:XA, Electric Pump:XA）Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations. With its lightweight and portable design, coupled with versatile functionality, the EDJ Diesel Engine Fire Pump System is suitable for various scenarios. Whether you are part of a fire department or an industrial enterprise, the EDJ Diesel Engine Fire Pump System is your indispensable rescue partner.

Diesel engine fire pumps are mainly suitable for fire water supply and foam fire extinguishing systems in petrochemical, natural gas, power generation, cotton and linen textiles, warehouses, airports, docks, high-rise buildings and other industries. It can also be used in occasions such as water ships, offshore oil tankers and fire fighting ships. The unit adopts imported diesel engine and fire pump. It has the characteristics of quick start, reliable water diversion, reasonable power reserve, stable operation, high degree of “three modernizations”, wide range of pressure and flow, etc. It is an advanced and reliable fire-fighting equipment.

– Rapid Evacuation: Ensuring the system supports rapid evacuation procedures to minimize risk to large crowds.
– Flexible Design: Providing flexible design options to accommodate varying event setups and capacities.
– Noise and Disruption Minimization: Ensuring minimal noise and disruption to maintain a pleasant environment.
– Compliance with Event Space Standards: Adhering to fire safety regulations and standards specific to high-occupancy event spaces.

EDJ series fire pump set consists of electric pump + diesel pump + Jockey pump and all accessories.
The pressure switch and the control cabinet can automatically turn on/off the three pumps – the electric pump and the pipe charging pump work when there is electricity, and the diesel pump when the power is off.
Flow range: 50-5000 GPM
Pressure range: 4-14 bar
Power range: 4-325 KW

1. Disconnect the power and turn off the fuel source.

2. Remove any remaining fuel in the pump.

3. Clean the pump with a mild detergent and warm water.

4. Flush the pump with clean water.

5. Grease the bearings and any moving parts of the pump.

6. Reassemble the pump.

7. Reconnect the power and fuel source.

8. Test the pump to ensure it is functioning properly.

After several years of R&D testing and certification, Beide Technology Group Co., Ltd. has obtained FM/UL certification for its existing fire pumps after obtaining domestic 3CF certification, and joined the NFPA Fire Engineers Association. Beide Technology Group Co., Ltd. has been committed to providing human beings with more reliable, more energy-saving and safer pump products.

The ultimate in tailor made fire protection pump packages are the SPP Pumps pump house packages, housing pumps, control systems and pipework. After simply connecting the water and power supplies on site, the unit is immediately operational.

1.Flow: 50-5000GPM
2.Head: 3-20Bar
3.Speed: 740-2900r/min
4.Power: Electric pump: 1.5-710 kw, Jockey pump: 0.55-160kw
The EEJ Fire Pump System is an innovative solution designed to enhance fire safety in various settings. With exceptional performance and efficiency, the EEJ Fire Pump System delivers high pressure and large flow capacity, enabling rapid and effective fire suppression.Overall, the EEJ Fire Pump System is a reliable choice for safeguarding lives and properties, making it an ideal fire protection solution for commercial buildings, industrial facilities, and residential areas.