EDJ Fire pump set

Fire pump controllers are devices that monitor and control the operation of fire pumps. They ensure that the pump starts automatically during an emergency, regulate pressure, and provide safety features. Controllers play a crucial role in the overall functionality of the fire pump system.

Fire pressurized and stabilized water supply equipment can make the fire water supply pipeline system the most unfavorable point always maintain the fire pressure, and the use of air pressure water tank always stored in the 30 seconds of fire water, to ensure the fire pump before the operation of the fire spray water; The device uses the operating pressure set by the air pressure water tank to control the operating condition of the pump and achieve the function of pressurization and pressure stabilization.

Fire pump package comprises a combination of electric motor driven pump, diesel engine driven pump and electric motor driven jockey pumps that supply for fire suppression systems.

XBC diesel engine fire pump is a fire protection product independently developed and produced according to the market demand and usage of domestic and international fire pumps. The use of this series of products, long operating life, good product reliability, is currently the domestic and international market fire engineering, sprinkler facilities fire pump products. The fire equipment quality supervision and testing center has been approved by the fire department according to the performance requirements and experimental methods of GB6245-2006 “fire pump”.

In general, the equipment is designed to have one duty and one standby function. The main pump runs normally, and the standby pump starts automatically after the main pump fault . The Jockey pump will start and stop based on the pipe pressure, when the electric pump malfunction or mains power, control cabinet will receive signals from the electric contact pressure gauges and start the diesel engine pump in 5 seconds, and achieve the rated conditions in 20 seconds, ensure the normal conduct of fire fighting work.

For supplying water to automatic fire fighting systems and installations with hydrants. Fire pumps are part of the water supply to a fire sprinkler system and are powered by electricity, diesel or steam. It is used to extinguish fires over a period of time.
The fire pump is equipped with a control panel where you can adjust the flow of water and its power.
It is the most important part of fire protection system safety, in order to ensure the safety of people inside buildings, schools, ministries, hospitals, markets, shops, factories, malls or any infrastructure, a fire pump system must be installed to prevent the fires they enter.
There are different types of fire pumps with different operations and capacities, for example; vertical and horizontal fire pumps powered by electric or diesel.

This equipment is a customized EEJ fire pump set which can meet 500GPM@80m. The duty pump and standby pump are XA series pump.

The EEJ fire pump set consists of two electric pumps + one jockey pump, which is suitable for fire protection occasions such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas, textiles, ships, and oil tankers.

EDJ diesel engine fire pump is used for various fire hydrants and sprinkler fire main pumps; it is suitable for various fire boosting and pressure stabilizing pumps; various villas, residential areas and other fire protection systems; industrial and civil building fire protection systems; suitable for Various oil depots, oil loading and unloading docks, logistics parks and other places with high fire protection requirements.

Guide readers through the process of determining the ideal fire pump size based on their facility’s unique layout, occupancy, and fire suppression needs. Explain concepts like required water flow rate and pressure, and recommend consulting with a fire protection engineer. Discuss how undersized pumps may fail to provide adequate protection, while oversized pumps may lead to unnecessary costs and maintenance.

The fire pump is the necessary water intake equipment for fire-fighting facilities. At least one or two fire pumps are equipped. The commonly used fire pumps are electric fire pumps and diesel engine fire pumps. The difference between the two is that the electric fire pump needs power system supply. The electric diesel engine fire pump can be started at any time to fill the position of the original electric fire pump.

Fire pumps are an important part of the fire protection system, especially in high rise structures.In basic 400 – 500 or advanced water situations, fire pumps are important to distribute water into water lines and sprinkler systems where the water pressure of the fire fighting equipment cannot reach. Especially in low-rise structures, fire pumps are important for fire control.
Stylistically, fire protection is a dangerous activity, but without a well-designed and professionally installed system and pump, it certainly becomes more dangerous and commercial assets and lives are less at risk.

Fire pump equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

This fire pump set is composed of diesel pump and stabilized pump. It adopts IS pump, which has advantages in price and is not affected by mains electricity. It is suitable for warehouses, docks, airports, petrochemicals, power plants, liquefied gas, textiles, ships , oil tankers and other fire-fighting occasions.

The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump set are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water pipe, etc. The specific fire pump model is determined according to the environment and performance requirements. At the same time According to the material quotation required by the customer, accurate selection is conducive to on-site use and reduces failure problems.

Fire pump installations in historical buildings may have unique considerations to preserve the architectural integrity. Compliance with historical preservation guidelines and coordination with relevant authorities is crucial.

500gpm@30m fire fighting package set-ZJBetter
The product is EJ fire pump set.
It is made of one electric pump 500gpm@30m one jockey pump with
Also include controller and pipe system

The EJ fire pump set has one electric pump and one jockey pump. The electric pump in the picture is ISW pump. ISW series horizontal single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly horizontal centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic

Better Technology Group Co., Ltd. is a professional water pump manufacturer. The company has a strong design, production, sales and service teams. The production history is long, the quality system is perfect, the testing methods are complete, the production process is advanced, and the product quality is guaranteed to avoid customers’ worries. Since the establishment of the company, the products have been constantly optimized and innovated, with the quality of replacing imported products and the price of domestic products.

The lower the pumping head of the fire pump, the smaller the motor load. Under the misleading of this kind of misunderstanding, when purchasing a water pump, the head of the water pump is often selected to be very high. In fact, for centrifugal water pumps, when the pump model is determined, the power consumption is proportional to the actual flow of the pump. The flow rate of the water pump will decrease with the increase of the head, so the higher the head, the smaller the flow rate and the smaller the power consumption. Conversely, the lower the lift, the greater the flow and the greater the power consumption. Therefore, in order to prevent the motor from overloading, it is generally required that the actual pumping head of the pump should not be lower than 60% of the calibrated head.

Pump Casing: The pump casing is the outer shell that encloses the internal components of the fire pump. It is designed to withstand high pressures and is usually made of durable materials such as cast iron or stainless steel.

Fire pump systems are comprised of various components, each playing a critical role in ensuring their proper function. Some of the key components include:

Fire Pump: This is the heart of the system, responsible for pressurizing the water and sending it to the fire protection devices.

Controllers: Controllers monitor the system, automatically starting the pump in response to a fire alarm signal and providing system status information.

Suction and Discharge Piping: Properly designed piping is essential for efficient water flow. Suction piping brings water to the pump, while discharge piping carries it to the fire protection devices.

Pressure Relief Valves: These safety valves release excess pressure to prevent damage to the system.

Valves: Various valves control water flow within the system, allowing for isolation, testing, and maintenance.

These components work in concert to provide reliable water distribution in case of a fire.

This is a set of EDJ fire pump set, which consists of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

Components
1. Diesel pump: flow is the same with electric pump. It connects the pump set with high elastic coupling or universal joint.
2. Jockey pump: vertical, small flow, head is higher than electric or diesel pump.
3. Control panel: control the pumps automatically with overload, overcurrent protection.
4. Accessories: Suction pipe, Discharge pipe with flange, Battery, Gate valve, Check valve, Flexible expansion joints, Pressure switches, Pressure gauge, base frame etc.

1. The performance of the fire pump should meet the flow and pressure requirements of the fire water supply system.
2. The power of the driver equipped with the fire pump should meet the requirements of the power required for operation at any point on the performance curve of the selected pump’s flow and lift.
3. When a motor-driven fire pump is used, a dry-installed fire pump with the motor should be selected.
4. The fire pump should be installed dry, and the pump should be placed outside the pool, and the submersible pump cannot be directly placed in the water for water absorption.

The minimum fire rated pressure of ED small fire fighting package set water supply equipment is 3 bar and the minimum fire rated capacity is 25 GPM. ED small fire fighting package set water supply equipment includes at least two power or power source driven pumping units, pressure tanks, pipes, valves and accessories, measurement and control instruments, control cabinets, outdoor rain cover, etc.
Motor: Three-phase asynchronous squirrel-cage motor independently developed and manufactured by our company, which can be controlled in production time and greatly shorten the whole set production time.
Diesel Engine: According to the different parameters of customers, we will choose diesel engines with high cost performance ratio. The main brands are QuanChai, Weichai, ShangChai, FAWDE, Cummins, etc.
Electric Pumps: Electric pumps can use vertical in-line pumps, horizontal end-suction pumps, vertical multi-
stage pumps, horizontal multi-stage pumps, split casing pumps and so on according to the different flow and head of customers.
Diesel Pumps: Diesel pumps can use vertical in-line pumps, horizontal end-suction pumps, vertical multi-
stage pumps, horizontal multi-stage pumps, split casing pumps and so on according to the different flow and head of customers.
Electronic Components: The main electric components is CHNT, if Schneider or other brand electrical are need, should mention it before place the order.
Safety Valve plays a safety protection role in the system. When the system pressure exceeds the prescribed value, the safety valve opens, and a part of the gas/fluid in the system is discharged into the atmosphere/pipeline, so that the system pressure does not exceed the allowable value, so as to ensure that the system does not cause accidents due to excessive pressure.
Pressure Tank: Water is a non-compressible medium. Generally speaking, the pressure drop of fire-fighting pipe network is normal. However, the pressure drop is very slow, the total loss of water in the pipe network isnot large, and the frequent change of pressure in the pipe network leads to frequent start-up and shutdown of pumps. Especially when the power of equipment is high, it will cause great impact on pressure sensors, relaysand motors, thus affecting the performance and life whole equipment. Therefore, it is necessary to choose the right volume of the pressure tank.

Power surges or electrical disturbances can impact the operation of electric fire pumps. Proper surge protection measures, such as surge suppressors and lightning protection, should be in place to safeguard the electrical components of the fire pump system.

Fire pump professional production manufacturers, complete products, manufacturers direct sales, after-sales worry, pump quality is good, durable products.

The fire pump unit can be classified according to the following rules:
1 according to the form of power source, it can be divided into:
A) diesel engine fire pump unit
Motor fire pump unit
C) gas turbine fire pump unit
D) gasoline engine fire pump unit
(2) it can be divided into:
A) water supply fire pump unit
Stabilized pressure fire pump unit
C) hand lift motorized fire pump unit
3. According to the auxiliary characteristics of the pump unit, it can be divided into:
A) common fire pump unit
Deep well fire pump unit
C) submersible fire pump unit
The above is the basic classification, but various types can be combined with each other, such as medium and low pressure fire pumps, high and low pressure vehicle fire pumps, ordinary fire pump sets, electric submersible fire pump sets, etc

The EDJ （Diesel Pump:XA, Electric Pump:XA）Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations. With its lightweight and portable design, coupled with versatile functionality, the EDJ Diesel Engine Fire Pump System is suitable for various scenarios. Whether you are part of a fire department or an industrial enterprise, the EDJ Diesel Engine Fire Pump System is your indispensable rescue partner.

Jockey pumps should be inspected regularly, with routine checks typically performed monthly. The inspection includes checking pressure settings, verifying proper operation, and inspecting for any leaks or damage. Ensuring that the jockey pump functions correctly helps maintain system pressure and prevent unnecessary wear on the fire pump.