EJ series Fire Fighting Pump System

Horizontal fire pumps have significant advantages such as high efficiency, low operating noise, good anti-cavitation performance, reasonable structure, and long service life. , Long-distance water delivery, heating, bathroom, boiler cold and warm water cycle pressurization, air conditioning and refrigeration system water delivery and equipment matching and other occasions.

Capacity: Q = 5~1800m3/h
Total head: H = 20~234m
Speed: n = 2940~980 r/min

The Vertical Inline pump is used for conveying liquids. It consists of an electric motor, pump body, impeller, and sealing device. The pump is suitable for conveying various liquids and can be selected based on specific process requirements and medium characteristics.

Ensure compliance by following the guidelines set by organizations such as the National Fire Protection Association (NFPA) and conducting regular inspections and maintenance as required.

Electric motor fire pumps are used in various water environments, not only to meet the general water supply but also to be a good helper for fire water. The electric motor fire pump is manufactured with good structure and workmanship. It has a wide range of performance, and is easy to use and operate for a long time. The motor fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.

The fire pump is used to pump various liquids. It is an ideal pump and fire system for building civilized factories, non-leakage, and pollution-free civilized workshops. It is often installed on fire extinguishing systems, fire trucks or other fire-fighting facilities for transportation Special pump for fire extinguishing with water or foam solution. Pipeline fire pumps are widely used in water treatment, environmental protection, fire protection and other departments.

self-priming type centrifugal oil pump
Model：40CYZ-A-20
flow：6m3/h
head：20m
with explosion proof motor 1.5kw

CDL/CDLF is a kind of vertical non-self priming multistage centrifugal pump, which is driven by a standard electric motor.
The motor output shaft directly connect with the pump shaft through a coupling.
The pressure-resistant cylinder and flow passage components are fixed between pump head and inlet &outlet section with stay bolts.
The inlet and outlet are located at the pump bottom at the same plane.
This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running, out-of-phase and overload.

CDL/CDLF is a kind of vertical non-self priming multistage centrifugal pump, which is driven by a standard electric motor. The motor output shaft directly connects with the pump shaft through a coupling. The pressure-resistant cylinder and flow passage components are fixed between pump head and inlet & outlet section with stay bolts. The inlet and outlet are located at the pump bottom at the same plane. This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running, out-of-phase and overload.

Jockey pump after package
3 sets 50gpm 8bar jockey pump after package
Ready to dispatch to ningbo port

An electric fire pump system typically includes:

The electric fire pump itself.
An electric motor to power the pump.
A controller to manage the pump’s operation.
Piping and valves to direct water flow.
Pressure relief valves and gauges.

XBD series electric fuel centrifugal fire pump is a new type of medium and low pressure fire protection product developed by our company according to my country’s latest fire pump standard (GB 6425-1998). Its motor and fire pump are directly connected, which simplifies the intermediate transmission structure and enhances the running stability. Its construction area is 30% less than that of ordinary horizontal fire pumps, and the shaft seal is made of hard alloy mechanical seal without leakage. XBD series includes vertical single-stage fire pump, vertical multi-stage fire pump, horizontal single-stage fire pump, horizontal multi-stage fire pump four structural types to meet the different requirements of users.

The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. The long shaft pump provides flexibility through customization options and multiple driving choices. It is a reliable solution for water supply, sewage treatment, and chemical processes. Choose the long shaft pump for reliable and efficient fluid handling in your engineering projects.

ZX series self-suction pump is an energy saving pump designed with ISO international standard and developed through absorbing and improving the related technical data both at home and abroad and belongs to the self-suction centrifugal pump and uses the mechanical seal of a ceramic ring so as to resist any sandy liquid to go into the sealing face, preventing it from getting scratched. This pump holds the advantages of a compact structure, easy operation, stablemovement, easy maintenance, high efficiency, long duration and strong self-suction capacity and, as no foot valve is needed to be mounted on the pipeline and only a certain amount of leading liquid is required to be filled into the pump before work, improves the work condition while simplifying the pipeline system.
This pump can be equipped with either Y series common motor or YB series explosion-proof one upon the different surroundings of use.

The Vertical Single stage fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others.

ISO single-stage single-suction centrifugal pump is a new generation of energy-saving and environmentally friendly horizontal centrifugal pump independently developed by the staff of Beide Technology Group and domestic water pump experts using the domestic excellent hydraulic model and the performance parameters of domestic general centrifugal pumps. Different from the ISW basic centrifugal pump, it has the characteristics of excellent performance, high reliability, long life, reasonable structure and beautiful appearance, and has the industry leading level.

Flow: 30-5000 GPM
Head: 3-20.5BAR
Speed: 980~ 3550 r/min

Vertical turbine pumps are used to extract normal temperature water and warm water below 100¡ãC from wells, rivers, lakes and seas. It is more suitable for urban, factory sewage and water with high sand content in rivers and seas, and is widely used in factories and mines, cities and countries, planting and farmland irrigation. They are also used for groundwater supply in municipalities that do not depend on surface water.

The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing. The XA pump is capable of handling different fluid mediums and provides efficient flow control. Its operating principle utilizes centrifugal force to draw in and propel fluids through the pump. Overall, the XA single-stage centrifugal pump is a reliable and efficient solution for fluid pumping needs in industrial settings.

Fire pumps, as the name implies, are used for fire fighting. They are divided into different types according to different classification methods. They are fully sealed, leak-free and corrosion-resistant. They are widely used in environmental protection, water treatment, fire protection and other departments to pump various liquids. It is an ideal pump for creating a leak-free, pollution-free civilized workshop and civilized factory.

Vertical turbine pump is used for pumping normal temperature water and warm water under 100°C from wells, river, lake , sea. Type JCW are better used for city, factory dirty water and water containing great sand in river and sea, widely used in factories and mines, city and countries, petrolatum filed, plant and irrigation on farmland.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

Pump type is vertical multistage centrifugal pump, with the use of health clean, high efficiency, low noise, resistance to mildly corrosive and compact structure, beautiful appearance, small size, light weight. The use of easy maintenance, and reliable sealing performance. Use for high-rise building pipeline booster, fire booster regulator system.

Horizontal fire pumps have significant advantages such as high efficiency, low operating noise, good anti-cavitation performance, reasonable structure, and long service life. , Long-distance water delivery, heating, bathroom, boiler cold and warm water cycle pressurization, air conditioning and refrigeration system water delivery and equipment matching and other occasions.

D-type horizontal, single-suction multi-stage, segmented centrifugal pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. For conveying clean water or other liquids with physical and chemical properties similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump flow parts, the sealing form and increasing the cooling system

Cavitation: Caused by low suction pressure, leading to vapor bubble formation and potential damage.
Wear and Tear: On impellers, bearings, and seals due to prolonged use.
Vibration: Often due to misalignment or imbalance.
Overheating: Usually a result of poor lubrication or mechanical binding.

The air conditioning circulation pump, also known as a chilled water pump, is a vital component of air conditioning systems used for circulating refrigerant or chilled water. It plays a crucial role in heat exchange and temperature regulation. The pump consists of an electric motor, pump body, impeller, sealing device, and control system. It enables the circulation of the refrigerant or chilled water to absorb or release heat, thereby achieving the desired cooling effect and regulating indoor temperatures. Key features of air conditioning pumps include high efficiency, control and automation capabilities, and diverse options to suit different system requirements. The selection of an appropriate air conditioning pump should consider specific system needs, flow rates, head pressures, and mediums.

This pump operates with multiple stages (impellers) stacked vertically, which pressurize the water as it moves upwards through the pump casing. Each impeller increases the pressure and flow until it reaches the required level for firefighting purposes.

ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others.

The key components include the electric motor, pump assembly (which includes the impeller and casing), controller or control panel, suction and discharge piping, and any necessary valves and fittings.