Electric fire pump

Pump type is vertical multistage centrifugal pump, with the use of health clean, high efficiency, low noise, resistance to mildly corrosive and compact structure, beautiful appearance, small size, light weight. The use of easy maintenance, and reliable sealing performance. Use for high-rise building pipeline booster, fire booster regulator system.

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105¡æ.
Series OTS pumps are available for capacities Of 68-18000m3/hr and heads of 70-200m.They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

Vertical fire pump is mainly suitable for pressurized water supply of fire system pipelines. It is also applicable to industrial and urban water supply and drainage. It can be used in some occasions such as pressurized water supply of high-rise buildings and long-distance water supply. It is composed of electromechanical and pump. The pump and motor share the same shaft. The pump structure is composed of pump body, impeller, pump cover, mechanical seal and other components. The inlet and outlet of the pump are on the same horizontal axis, and the diameter specifications Also, it is very convenient to install and remove. If the pump is equipped with a mounting base, the installation is also more convenient, which can increase the stability of the pump during operation. The seal of the pump is a mechanical seal, which has the characteristics of reliable sealing and no leakage.

Vertical turbine electric pump are better used for city, factory dirty water and water containing great sand in river and sea, widely used in factories and mines, city and countries, petrolatum filed, plant and irrigation on farmland.

Features:
* Automatic start:After receiving the start signal, the diesel pump unit can start automatically and put
into full load operation within 5-15 seconds.
* Automatic charging: Batteries can be automatically charged by charging motors of municipal or
diesel engines to ensure the smooth start of the unit.
* Automatic alarm:Automatic alarm and protection for diesel engine faults such as low oil pressure
and high water temperature, alarm and stop at super speed.
* Reliable and Economic:It can run in the condition of power cut,no electricity charge.

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy-saving, environment-friendly vertical centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps. In addition, according to different operating temperatures and mediums, we developed the hot-water pump(IRG), corrosion-resistant chemical pump(IHG) and oil pump (YG) – . This pump enjoys excellent performance, good reliability, long operation life, reasonable construction and nice appearance, which is outstanding in the industry.

There are different types of fire pumps, which are also to meet the needs of different places. Fire pumps have different structural forms, so that suitable structures can be found in different places, thus meeting the needs of different users. It can be well applied in public places or mobile places.

There are many classification methods for fire pumps, which can be divided into sprinkler pumps, fire hydrant pumps, jockey pumps, etc. according to their uses.

The fire pump is suitable for pressurizing water supply in the fire pipeline. The purpose is to transport clean water or other liquids with physical and chemical properties similar to clean water for pressurization. The temperature of the medium used by the horizontal pump is not higher than 80 ¡ãC. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, long-distance water supply, heating, bathroom and other cold and warm water circulation pressurization and equipment matching.

The oil pump is a light and compact pump, and there are three categories of in-line, distribution and single. The oil pump needs a power source to run, and the lower camshaft is driven by the engine crankshaft gear.

Long-shaft pump is a kind of centrifugal pump. From the perspective of centrifugal pump, it is improved from the performance of submerged pump. This pump can be used to transport rainwater, iron oxide water, sewage, corrosive industrial Wastewater, seawater and other liquids. Widely used in water companies, sewage treatment plants, steel plants, mines and other industrial and mining enterprises, as well as municipal water supply and drainage, farmland irrigation, flood control and drainage projects.

Jockey pump after package
3 sets 50gpm 8bar jockey pump after package
Ready to dispatch to ningbo port

WXZQseries fire pneumatic water supply equipment is composed of fire pressure stabilizing device, fire pump and electric control system. As a complete set of equipment, it can meet all technical specifications of automatic fire water supply. In addition, it can accept and process all kinds of fire signals, replace the fire control center, and send out all kinds of operation and fault alarm signals.

Site conditions
YE3 series motors air suitable for almost all applications and operate satisfactorily at temperatures from -20 to +40 and
altitudes up to 1000 meters above sea level.
Temperature and insulation
The Motors’ insulation system are designed by Class F(155 ), operated with Class B(80K). Which incerase the motor useful
life and reliability.
Cooling and ventilation
The standard cooling method is totally Enclosed Fan Cooled(TEFC) in accordance with IC411 of IEC60034-6. Standard
motors are equipped with radialflow plastic fans.
Protection class
The standard degrees of protection is IP55.The IP55 enclosure means complete hoseproof and dustproof protection. A
higher degrees of protection is available.
Motor protection
Motors can be installed with PTC, PT100, such as winding and bearing temperature measurement as well as other kinds of
protection on request

Electric motor fire pumps are used in various water environments, not only for ordinary water supply but also as a good helper for fire water. The electric motor fire pump is manufactured with good structure and technology, with a wide range of performance, simple operation and long-term use. The electric motor fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.

The advantage of the multi-stage pump is in the head, which has the characteristics of small flow and high head. The multi-stage fire pump has two or more impellers, which can achieve a larger head at the same flow rate. Generally, they can be used as industrial pumps, domestic pumps and fire pumps.

Pumps type IS is a kind of axial suction centrifugal pump with single stage and suc-tion.
It is used to pump clear water and physical or chemical liquid similar to clear water below85℃, and is widely applied to industries, to citywater supply and drain, and also to agricultural and orchard irrigation.

CPS pump ready to loading
This is Constant Pressure Systems
normal color is blue, and use for water supply

Application
Split case pumps are specifically designed and
tested for fire service application around the
world including:
1.Office buildings
2.Hospitals
3.Airports Manufacturing facilities
4.Warehouses Power stations
5.Oil and gas industry
6.Schools/colleges
7.Hotels

ISG vertical single-stage single-suction centrifugal pump
1.Suction pressure≤1.0Mpa, or maximum operation pressure
of pump system≤1.6Mpa, that is, pressure in suction nozzle+pump
lift≤1.6Mpa. If operation pressure of pump system is higher than
1.6Mpa, it should be indicated in order, so that we can use more
reasonable material for flow and connecting parts in pump.
2. Ambient temperature＜40℃ ＜ , relative humidity 95%.
3. In the conveyed medium, solid particles should be less than
0.1% in unit volume, and granularity＜0.2mm.

Series OTS pumps are single stage,double suction with horizontally split casings.
They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105℃.
Series OTS pumps are available for capacities Of 68-18000m3/hr and heads of 70-200m.
They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

Submersible pump is an important equipment for deep well water extraction. During use, the whole unit works in the water to extract groundwater to the surface, which is used for domestic water, mine rescue, industrial cooling, farmland irrigation, sea water lifting, ship load regulation, and fountain landscape.

The video shows electric fire pump that bare shaft pump is XA series. XA series single-stage centrifugal pump is the earliest single-stage single-suction centrifugal pump product launched by Better (China)Technology Co., Ltd. This product combines the advantages of similar products in China and abroad, and is designed with excellent hydraulic model. Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operation cost of pumps in various applications.

The characteristics of stainless steel are characterized by corrosion resistance and rust resistance. Long -term underwater work iron products will soon be rusted and cause damage to the body. Stainless steel is an ideal material.

Middle open pump (middle open cycle), also known as single-stage double suction centrifugal pump, is mainly characterized by large flow of conveying medium.

Operating principle of the split pump: the impeller is installed in the pump shell and fastened on the pump shaft, which is directly driven by the motor. The center of the pump housing is connected with a liquid suction pipe. The liquid enters the pump through the bottom valve and the suction pipe. The liquid discharge port on the pump casing is connected with the discharge pipe. When the speed of the pump is constant, its head and flow are related to the impeller diameter.

The biggest characteristic of deep well pump motor and pump into an organic whole, it is immersed in the underground Wells to a kind of pump and water pump, is widely used in farmland irrigation and drainage, industrial and mining enterprises, urban water supply and drainage and sewage treatment, etc. Because the motor into the water at the same time, the reason for the structure of the motor requirements than the general motor special. The structure of the motor can be divided into dry type, half dry type, oil filled type, wet 4 kinds

WXZQ series fire-fighting stabilized pressure water supply equipment is based on GB27898.3-2011 fixed fire water supply equipment, Part 3: fire-fighting pressurized stabilized pressure water supply equipment. It fully absorbs the latest achievements and experience of air pressure water supply technology in recent years in terms of technology and selection methods of parts. It is a new type of ideal fire-fighting water supply equipment.

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105C¡£
Series OTS pumps are available for capacities Of 69-000m3/hr and heads of 70-200m.They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc. ?

Model: D25-30X5,
Parameter: 25m3/h@210m,
Motor power: 37kw,
Speed: 3500rpm,

Sewage pump is a pump and motor connected, and at the same time into the liquid work pump products, compared with the general horizontal pump or vertical sewage pump, sewage pump compact structure, small footprint. Easy installation and maintenance, large sewage pumps are generally equipped with automatic coupling device can be automatically installed, installation and maintenance is quite convenient. Long continuous operation time. Sewage pump because pump and motor coaxial, shaft is short, rotating parts light weight, so the bearing load (radial) is relatively small, life is much longer than the general pump. There is no cavitation damage and irrigation water problems. In particular, the latter point brings great convenience to the operator. Low vibration noise, low motor temperature rise, no pollution to the environment.