Electric Jockey Pump Factory

Vertical fire pumps are widely used in our lives, such as in water treatment, fire safety and other departments. At the same time, it also has the characteristics of full sealing, no leakage and corrosion resistance, and is widely used in life and production. In transportation It also shows its excellent characteristics in terms of storage and storage, and has become a device that is needed in many places now.

WXZQ series fire-fighting stabilized pressure water supply equipment is based on GB27898.3-2011 fixed fire water supply equipment, Part 3: fire-fighting pressurized stabilized pressure water supply equipment. It fully absorbs the latest achievements and experience of air pressure water supply technology in recent years in terms of technology and selection methods of parts. It is a new type of ideal fire-fighting water supply equipment.

Two electric pumps(one duty and one standby) and a Jockey pump.also fesaible foe places where power supply is table or where there self-allocated generators
Electric pumps can use vertical in-line pumps,horizontal end-suction pumps,vertical multi-stage pumps,horizontal multi-stage pumps,split casing pumps and so on according to the different flow andhead of customers.

Key installation requirements include:

A stable and reliable power source, often with a backup generator.
Proper sizing based on the building’s fire protection needs.
Adequate ventilation and cooling in the pump room to prevent overheating.
Installation of controllers and alarms to monitor pump status.
Compliance with local fire codes and standards such as NFPA 20.

Horizontal fire pumps are mainly used for pressurized water delivery in firefighting system pipelines, and can also be applied to industrial and urban water supply and drainage, pressurized water delivery for high-rise buildings, long-distance water delivery, heating, bathrooms, boiler cold and warm water circulation, pressurized air conditioning and refrigeration system water delivery and equipment support and other occasions.
The horizontal fire pump consists of two parts, the motor and the pump. The fire pump and the motor are coaxial. The pump structure includes the pump body, impeller, pump cover, mechanical seal, etc. It is equipped with a mounting base, which is easy to install and increases the stability of the pump operation. , The pump seal adopts mechanical seal, which has the characteristics of reliable sealing and no leakage.

A split pump is a centrifugal pump with two single-suction impellers or a double-suction impeller supported between bearings. The housing is axially separated from opposing suction and discharge flanges. This facilitates maintenance of the pump. This robust and simple design is especially suitable for high flow applications.

Electric fire pumps offer several advantages, including:

Consistent and reliable operation as long as there is an electrical power supply.
Lower maintenance compared to diesel-powered fire pumps.
Quieter operation.
Environmentally friendly with no exhaust emissions.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-400 mm
Frequency：50 or 60 Hz

In production and life, fire pumps have the characteristics of a wide range of applications, such as in water treatment, fire safety and other departments. Fire pumps can not only be used in fire protection systems, multi-stage fire pumps can also be used in industrial production and urban construction, including industrial and urban water supply and drainage, and pumping water for high-rise buildings. Engineering fire pumps are used for fire pumps in engineering sites such as fire hydrant systems, water sprinkler fire extinguishing systems, and foam fire extinguishing systems.

Pumps type IS is a kind of axial suction centrifugal pump with single stage and suc-tion.
It is used to pump clear water and physical or chemical liquid similar to clear water below85℃, and is widely applied to industries, to citywater supply and drain, and also to agricultural and orchard irrigation.

Explosion-proof pumps are mainly used in some dangerous places with strict requirements for explosion-proof. Such as: chemical plants, gas stations, etc. Therefore, explosion-proof standards must be met in these places, otherwise it will cause unnecessary safety hazards. The explosion-proof pump adopts an explosion-proof enclosure, which can isolate the electrical parts of sparks, arcs and dangerous temperatures that may be generated during the conveying of the medium from the surrounding explosive gas mixture.??

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

Flow：250-10000 GPM
Head：3-16 Bar
In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants, oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

Cavitation: Caused by low suction pressure, leading to vapor bubble formation and potential damage.
Wear and Tear: On impellers, bearings, and seals due to prolonged use.
Vibration: Often due to misalignment or imbalance.
Overheating: Usually a result of poor lubrication or mechanical binding.

There are many classification methods for fire pumps, which can be divided into sprinkler pumps, fire hydrant pumps, stabilized pumps, etc. according to their uses.

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105¡æ.
They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

APPLICATION RANGE:
Capacity: Approx 75- 22000 m3 /hr.
Total head: Approx 10-220 m.
Liquid: Fresh water/ Industries/River water/Sea water/Brine/Paper stock Hydro-carbon etc.

The electric fire pump is mainly used for pressurizing water supply in the pipeline of the fire protection system. It can pressurize and supply water to the pipeline of the fire protection system in various occasions, such as in the fire hydrant fire extinguishing system, in the automatic sprinkler fire extinguishing system, and in the water spray fire extinguishing system. Pressurized water delivery is possible.

The advantages of vertical pipeline centrifugal pump:

(1) Small size and small footprint.

(2) The structure is simple, the parts are few, and the maintenance is easy.

(3) The flow and pressure are stable, and the vibration of the pump is small when the pump is running normally.

The pumps used in firefighting are divided into different types according to different classification methods. With its fully sealed and non-leakage characteristics, it is used in environmental protection, water treatment, fire-fighting and other departments to pump various liquids. It is a non-leakage, civilized The ideal pumps for workshops and civilized factories are similar to the types of pumps for fire protection systems, but the head and flow are different.

The video shows the testing for a vertical multistage fire pump. Multistage pumps can be used to meet high pressure.

Selection criteria include:

Required flow rate and pressure.
Depth and characteristics of the water source.
Type of installation (indoor or outdoor).
Compliance with relevant standards and regulations.
Environmental conditions and potential hazards.

XA80/32 and XA100/32 bare shaft pump for shipment

Selecting the right fire pump is a critical decision that depends on a range of factors. These factors include the facility’s water supply source, the building’s size and layout, the required flow rate, and the local fire codes and regulations.

For example, a large industrial facility may require a high-capacity fire pump, while a small office building may need a lower-capacity pump. The choice also depends on whether the facility uses municipal water, a private water supply, or a combination of both.

Consulting with a fire protection engineer or specialist is often recommended to ensure the selection of the most suitable fire pump for a specific application.

Flow：50-7500 GPM
Head：3-20 Bar
Vertical Turbine Fire Pumps play a versatile role in various applications. They are essential in water management, agriculture for irrigation, and industrial processes dealing with different liquids. These pumps excel in emergency fire response, ensuring a swift and reliable water supply. Crucial for urban water systems, they meet the constant demand for clean water.

The OTS Double-Suction Split-case centrifugal Pump with High-Pressure Electric Motor is an exceptional firefighting equipment. This powerful combination delivers high flow rates and unmatched pumping efficiency, ensuring robust and continuous firefighting actions. Its compact design allows for quick deployment and rapid response, making it suitable for various settings. From rural wildfires to urban firefighting needs, this firefighting pump safeguards communities of all sizes, representing the pinnacle of safety and protection.

The Vertical Single stage fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more.

Jockey pump, with simple structure and low price, is an important part of the fire protection system. There needs to be water in the fire-fighting pipeline at all times. Whenever a fire occurs, the system needs to be started immediately, and the Jockey pump can maintain the pressure value in the pipeline.

WXZQseries fire pneumatic water supply equipment is composed of fire pressure stabilizing device, fire pump and electric control system. As a complete set of equipment, it can meet all technical specifications of automatic fire water supply. In addition, it can accept and process all kinds of fire signals, replace the fire control center, and send out all kinds of operation and fault alarm signals.

The OTS Double-Suction Split-case centrifugal Pump with High-Pressure Electric Motor is an exceptional firefighting equipment. This powerful combination delivers high flow rates and unmatched pumping efficiency, ensuring robust and continuous firefighting actions. Its compact design allows for quick deployment and rapid response, making it suitable for various settings. From rural wildfires to urban firefighting needs, this firefighting pump safeguards communities of all sizes, representing the pinnacle of safety and protection.