Electric vertical turbine pump test

Testing an electric fire pump involves several steps:

Weekly or monthly churn tests: Run the pump without flowing water to check its operational status.
Annual flow tests: Perform a full flow test to ensure the pump meets the required performance criteria. This includes measuring the flow rate and pressure at various points and comparing them to the pump’s rated capacity.
Performance data recording: Document all test results and compare them against previous data to identify any performance changes.

ISO single-stage single-suction centrifugal pump is a new generation of energy-saving and environmentally friendly horizontal centrifugal pump independently developed by the staff of Beide Technology Group and domestic water pump experts using the domestic excellent hydraulic model and the performance parameters of domestic general centrifugal pumps. Different from the ISW basic centrifugal pump, it has the characteristics of excellent performance, high reliability, long life, reasonable structure and beautiful appearance, and has the industry leading level.

CPS pump ready to loading
This is Constant Pressure Systems
normal color is blue, and use for water supply

Structural Description
1. Electric Fire Pump XBD series fire pumps are a kind of new type fire products researched and developed in full compliance with the state issued newly standard of GB6245-2006 “Fire pump”, according to the end-user’s practical needs and special using requirements. The inspection of the state fire equipment quality supervising center shows its all kinds of performance indexes are up to or over the standard’s requirements and it earned the certificate for fire state products.
2. Jockey Pump Pump motor, pump head, guide vanes, impeller, pressure tube, and out of the water segment, the shaft, mechanical seal components. Pump key parts guide vanes, impeller, pressure cylinders, shafts are made of stainless steel pump head, and out of the water segment: CDL, pump iron castings CDLF pump with stainless steel precision castings. Pump shaft seal, single mechanical seal friction pair to support the use of alloy steel carbide / graphite, the guide vanes. Pump and piping connection type for the circular flange connection, according to user need to use different connection methods.

Multistage pumps are used for feeding low and middle pressure boiler water or for pumping other middle pressure water. The temperature of pumped medium are not more than 110℃.
This pumps are horizontal single-suction centrifugal pump with ring section body. The position of suction port is arranged horizontal and is vertically up.
The position of discharge port is arranged vertically up.
The shaft sealing of these pumps are sealed with soft-packing. At the location of the shaft sealing, there is a renewable sleeve to protect the shaft.
The pumps are directly driven by the motor through the flexible coupling.
The rotating directions of the pumps are clockwise, when viewed pump from the driving end.

Flow：50-5000 GPM
Head：3-16 Bar
The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

WXZQ series fire-fighting stabilized pressure water supply equipment is based on GB27898.3-2011 fixed fire water supply equipment, Part 3: fire-fighting pressurized stabilized pressure water supply equipment. It fully absorbs the latest achievements and experience of air pressure water supply technology in recent years in terms of technology and selection methods of parts. It is a new type of ideal fire-fighting water supply equipment.

Flow：250-10000 GPM
Head：3-16 Bar
In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants, oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

Flow：500 GPM
Head：125 psi
The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

OTS pump is our common name. Its professional name is called single-stage double-suction centrifugal pump. The working principle of OTS pump operation: the impeller is installed in the pump casing and fastened to the pump shaft, which is directly driven by the motor.

The Horizontal Multistage Pump is an exceptional engineering solution that offers high performance and reliability for fluid handling applications. With its unique multistage impeller design, it delivers efficient and incremental pressure boosting for high-pressure and high-flow scenarios. Whether used in water supply systems, industrial processes, irrigation, or building cooling, this pump ensures stable water pressure and flow.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.

The G Single Screw Pump is a versatile positive displacement pump designed for the transportation of high-viscosity liquids. Featuring inter-meshing screws within the pump body, it creates continuous sealed chambers for efficient fluid movement. This pump finds widespread application in industries such as chemical, petroleum, food, and pharmaceuticals, where it excels at conveying high-viscosity, high-temperature, abrasive, or corrosive liquids. Its advantages lie in high-precision conveying, excellent self-priming capabilities, wide applicability, corrosion resistance, and low noise operation. The G Single Screw Pump offers a reliable and efficient solution for industrial liquid transportation needs.

Flow：50-7500 GPM
Head：3-20 Bar
The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

The electric motor fire pump is a relatively important water supply equipment in the fire protection system. The electric motor fire pump has a wide coverage of lift, flow and power, and can be used in many environments. Providing sufficient water supply is the key to ensuring emergency use.

The horizontal pipeline pump is a horizontally arranged pumping device used for conveying liquids or gases. It consists of an electric motor, pump body, impeller, and sealing device. Compared to vertical pipeline pumps, the horizontal pipeline pump offers advantages such as a smaller space requirement, convenient maintenance, stable operation, and wide applicability. Its horizontal layout helps reduce axial and radial loads, thereby enhancing the pump’s stability and operational efficiency. The horizontal pipeline pump is suitable for conveying various liquids or gases and can be selected based on specific process requirements and medium characteristics. It is recommended to consult with professional engineers or pump suppliers when purchasing and using a horizontal pipeline pump to ensure the selection of suitable equipment.

·UL Standard:
Flow:50-500GPM
Head:6-16 Bar（90-230PSI）
·Non-UL Standard:
Flow：50-5000 GPM
Head：3-16 Bar（40-232 psi）

XBD series fire pump set is a new type of fire pump developed by our company according to the actual needs of the market for fire booster (stabilized) pumps and its special requirements for special use, and in strict accordance with the latest national GB6245-2006 “fire pump” standard. product. Tested by the National Fire Equipment Quality Supervision and Testing Center, all performance indicators meet or exceed the standard requirements, and have obtained the formal certification of the National Fire Equipment Testing Center.

The XBD-DL vertical multistage fire pump is a top-tier technology designed to enhance the safety and efficiency of building fire protection systems. With advanced design and technology, this pump offers excellent corrosion resistance and durability, making it suitable for various environmental conditions. Its high-performance turbine blade design and efficient motor ensure powerful water pressure and flow, enabling rapid and effective water delivery. The intelligent monitoring system and fault alarm function enhance the pump’s reliability and availability. By choosing the XBD-DL vertical multistage fire pump, you gain an innovative and efficient solution to enhance the safety and efficiency of your fire protection system.

The OTS Double-suction Split-case centrifugal pump is a widely used centrifugal pump in industrial and water supply systems. It features a double-suction design with two suction inlets on either side of the pump. This pump offers high efficiency, stability, and reliability due to its rational design and advanced fluid dynamics principles. It can handle large flow rates and high heads, making it suitable for various applications. The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.

With proper maintenance and regular testing, an electric fire pump can have a lifespan of 20-30 years or more. Regular inspections and timely repairs are key to ensuring its longevity and reliability.

The Portable Irrigation Pump is a portable and user-friendly tool used primarily by farmers and gardening enthusiasts for small-scale irrigation in fields, vegetable gardens, and flower beds. With its manual operation, this pump requires no external power source, making it suitable for remote areas lacking electricity or other energy supplies.

Electric fire pumps are mainly used for pressurized water supply for fire protection systems, and can also be used for drainage of factories and mines. Mainly used in industrial and mining enterprises, engineering construction, high-rise buildings and residential area fire hydrant water supply system, automatic sprinkler fire extinguishing water supply system.

The single-stage double suction centrifugal pump is a new type of energy-saving horizontal split pump, which is used to transport clean water or other liquids with physical and chemical properties similar to water. According to the user’s demand, the pump can be used to transport muddy sand water or various corrosive liquids by changing the pump structure and material. This series of pumps are suitable for factories, mines, urban water supply and drainage, power stations, household irrigation and drainage and various water conservancy projects.

Regular testing ensures that fire pumps are functional and ready in an emergency. Insurance providers mandate this to mitigate risk and ensure compliance with safety regulations, potentially affecting coverage and premiums.

Submersible pump is an important equipment for deep well water extraction. During use, the whole unit works in the water to extract groundwater to the surface, which is used for domestic water, mine rescue, industrial cooling, farmland irrigation, sea water lifting, ship load regulation, and fountain landscape.

ISG Vertical In-line Pumps are widely used in building water supply systems, HVAC systems, cooling water systems, industrial circulation systems, fire protection systems, and other fields, providing efficient and reliable hydraulic conveying solutions for various facilities.

Middle open pump (middle open cycle), also known as single-stage double suction centrifugal pump, is mainly characterized by large flow of conveying medium.

Operating principle of the split pump: the impeller is installed in the pump shell and fastened on the pump shaft, which is directly driven by the motor. The center of the pump housing is connected with a liquid suction pipe. The liquid enters the pump through the bottom valve and the suction pipe. The liquid discharge port on the pump casing is connected with the discharge pipe. When the speed of the pump is constant, its head and flow are related to the impeller diameter.

·UL Standard
Flow：100-2500 GPM
Head：90-250 PSI
·NON-UL Standard
Flow：250-10000 GPM
Head：30-200 m / 3-20 Bar / 40-290 psi