End Suction Diesel Engine Fire Pump Ultimate Safety Solution

Experience efficient fluid transfer with the XBC-XA Diesel End Suction Pump. With its unique end suction design and powerful diesel engine, this pump offers reliable performance and exceptional pumping capacity. It is suitable for a wide range of applications, from industrial fluid transfer to fire protection systems. The XBC-XA Diesel End Suction Pump features automatic operation, advanced control systems, and automatic fault detection for added safety and convenience. Choose this versatile pump for reliable and efficient fluid transfer in various industries.

1. Automatic start: After the diesel engine pump unit receives a fire alarm/pipe network pressure/power failure/or other start-up signals, it can start automatically within 15 seconds and be put into full-load operation;
2. Automatic charging: the battery can be automatically charged by the mains or diesel engine charging motor to ensure the smooth start of the unit;
3. Automatic alarm: automatic alarm protection for diesel engine low oil pressure, high water temperature and other faults, and alarm and stop when the speed is exceeded again;
4. Automatic preheating: keep the diesel engine in a hot standby state to ensure emergency work;
5. Direct connection type: The diesel engine pump unit below 360kw adopts the first domestic direct connection technology between the diesel engine and the water pump through the elastic coupling, which reduces the failure points, greatly shortens the starting time of the unit, and increases the reliability and emergency performance of the unit ;
6. Users can also request to set other alarm outputs (non-standard supply);
7. With telemetry, remote signaling and remote control functions (non-standard supply);
8. The equipment is powered by X6135, 12V135, 4102, 4105, 6102 and other series diesel engines. The diesel engine (with clutch) is connected with the fire pump through a highly elastic coupling to form a fire pump group. Fans, control panels (for automatic units) and other components.
9. When it is an automatic control unit, the split diesel engine automatic control cabinet (programmable) realizes the automatic start, input and automatic switching of the system (the electric pump group is switched to the diesel engine pump group or the diesel engine pump group of this group is switched to another group. Diesel unit), automatic protection (diesel engine overspeed, low oil pressure, high water temperature, three start failures, low oil level, low battery voltage and other alarm shutdown protection) and other functions, and can also interface with the user’s fire center or automatic fire alarm device, Realize remote monitoring.
10. In order to ensure the normal operation of the unit in an environment below 5°C, the unit can be equipped with an AC220V cooling water preheating heating device.
11. Diesel engine fire pump can form an automatic fire water supply system with electric pump group, stabilized pump, etc.
There are two water inlet methods for fire pumps: self-irrigation and suction. According to the requirements of fire protection regulations, it is generally self-irrigation. If the user needs to absorb two kinds of water, according to the requirements of fire protection regulations, it is generally the method of self-irrigation and water diversion. If the user needs to suck up the water inlet system, special instructions are required so that the company can provide an automatic vacuum water diversion device, but the size of the pump set has changed.

Now the general diesel engine fire pump set is powered by imported or domestic Cummins, Wuxi Power Engine Factory and other diesel engines produced by large-scale key enterprises in the internal combustion engine industry at home and abroad, through highly elastic couplings or diaphragm couplings produced by professional manufacturers. The engine is directly connected with the water pump, and the power of the diesel engine can reach 880KW. It can be equipped with water pumps of different lifts and flow rates for customers to choose and use according to different needs.

The diesel engine fire pump set has the characteristics of good starting characteristics, strong overload capacity, compact and reasonable structure, convenient maintenance, simple and reliable use, etc. The unit is equipped with protection functions such as overspeed, low oil pressure, three start failures, high water temperature, low oil level, and low battery voltage. At the same time, it can be connected with the customer’s automatic fire alarm device or the fire control system control cabinet produced by our factory to realize the function of remote monitoring.

Diesel engine fire pump unit is a kind of pump equipment that is widely used in fire protection, and it is more suitable for mobile work in fire pumps. In fact, it is driven by a diesel engine connected to the pump head of the fire pump. Compared with motor drive, it can be used in the field, mines, and places lacking power supply. It is also called a diesel engine pump or a diesel engine fire pump unit.

The XBC-S 11.5/160 320kW Diesel Engine Fire Pump is a cutting-edge and high-performance firefighting solution designed to provide exceptional power, efficiency, and reliability in fire suppression operations. This robust fire pump is specifically engineered to meet the demands of challenging fire scenarios, ensuring the swift and effective extinguishing of fires in various industrial, commercial, and residential settings.

ISO End suction Pump range:
capacity: 50-3000gpm
Pressure: 5-15bar
Power: 11-200kw

The XBC-IS Diesel Engine Fire Pump is the ultimate solution for reliable fire protection in a wide range of settings, including factories, commercial buildings, residential areas, public facilities, and even agricultural fields. Designed to meet emergency firefighting needs, this pump ensures a dependable water source and increased water pressure, regardless of the availability of electricity.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Standard:
       UL    Flow：100-3000 GPM    Head： 90-250 PSI 
       NON-UL   Flow：100-10000GPM   Head： 40-250 PSI 

XBC series diesel engine fire pump is a new type of fire fighting equipment developed on the basis of supporting fire pumps (single-stage single-suction type, single-stage double-suction type, segmented multi-stage type), and can be divided into several series. The equipment has a wide pressure and temperature range and can be used in almost every occasion required for fire protection. The diesel engine matched with this equipment is an excellent domestic or imported product, which has the characteristics of good starting performance, strong overload capacity and compact structure. , easy to maintain and use, high degree of automation.

Not all buildings require fire pumps. Their necessity depends on various factors, including the building’s size, occupancy type, and the available municipal water supply pressure. Local building codes and regulations dictate when fire pumps are required.

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 

·NON-UL  Standard:
Flow：50-5000GPM 
Head： 40-250 PSI 

XBC-D Diesel Fire Pump Set is a versatile and reliable firefighting solution designed for a wide range of applications. Whether it’s industrial facilities, commercial buildings, residential complexes, or public infrastructure, the XBC-D Diesel Fire Pump Set ensures effective fire protection. With its robust design and advanced features, this pump set is ready to tackle emergencies and safeguard lives and properties in various firefighting scenarios.

1.The packing of our products conforms to the national standard, meet customer needs, and standard handling and transportation.

2.All products are tested before delivery to ensure no quality problems.

3.As for after-sales problems, we can dispatch engineers to solve them on site, so you can buy our products at ease.

Flow：80-2700 GPM
Head：10-24 Bar 145-350 psi
Power：11-1000 kw
Caliber：65-300 mm
Frequency：50 or 60 Hz
Working Pressure：≤2.5 MPa

When the temperature of a diesel engine fire pump becomes too high, it can indicate various underlying issues that need to be addressed promptly to avoid potential damage or failure. Here are five possible reasons why the temperature of the diesel engine fire pump might be too high

This series of pump is horizontal multistage single suction centrifugal water pump. This pump is efficient , reliable, and durable with low noise performance, easy maintenance and wide scope of usages.

Flow：80-4000 GPM
Head：3-15 Bar
Power：11-1000 kw
The Diesel Single-stage Single-suction Fire Pump is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the Diesel Single-stage Single-suction Fire Pump delivers dependable performance to safeguard lives and properties from fire risks.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar 40-300 psi
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min

The diesel engine-powered water pump of the fire pump set is composed of horizontal centrifugal pumps, diesel engines, electrical instruments and other equipment, which are tightly installed on a common chassis, and connected with the electric control box through control lines and signal lines. The complete set of water supply equipment for diesel engines can be used in various enterprises. The production of automatic/manual water supply systems can also be used for fire water supply and occasions with special requirements.

XBC diesel engine fire pump product head, flow range is wide, can fully meet the warehouse, wharf, airport, petrochemical, power plant, liquefied gas station, textile and other industrial and mining enterprises in various occasions of fire water supply.

The diesel engine fire pump set adopts ISW pump.
1. The pump is the horizontal structure, the inlet and outlet are the same in diameter, and lying in the same center line, which can be installed in the pipeline as valve, the floor space needed is small, if the protection cover is added, it can be put in the open air;
2. The impeller is installed on the major axis of the motor directly, the axial is short in size, the structure is compact, can calibrate radial and axial load that produced by pump rounding effectively, thus guaranteed the pump operating steadily, vibration, and low noise;
3. The axle seal adopts machinery seal or machinery seal sets, uses imported titanium alloy sealed ring, medium-sized high-temperature resistance machinery seal and adopts the hard alloy material, wear-resisting seal, which can lengthen the life of machinery seal effectively;
4. It is convenient to install and overhaul, no need to dismantle or move pipeline system; just lifting off pump conjunction flat nut can take all rotor parts out;
5. Can choose series or parallel operation according to your requirements for flow and lift;
6. Can be installed horizontally according to the pipeline system requirement.

The XBC-S 330KW Diesel Fire Pump stands out for its exceptional performance and reliability. It possesses outstanding pumping capacity and lift height, enabling the swift delivery of large volumes of water to the fire scene, ensuring quick and efficient firefighting and fire control. Whether faced with fires in buildings, factories, warehouses, or other locations, the XBC-S 330KW Diesel Fire Pump is up to the task.

Flow：80-4000 GPM
Head：3-15 Bar
Power：11-1000 kw
The Diesel Single-stage Single-suction Fire Pump is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the Diesel Single-stage Single-suction Fire Pump delivers dependable performance to safeguard lives and properties from fire risks.

The diesel engine with right-angle gearbox combination is a high-performance power transmission solution widely used in various industrial applications. It features a diesel engine as the primary power source and a right-angle gearbox for efficient power redirection and speed matching. This compact and reliable duo enhances production efficiency, reduces energy consumption, and provides a stable power source for industrial automation and ship propulsion systems. Its adaptability to diverse climate conditions and load demands further reinforces its significance in modern industries.

The diesel engine fire pump set is used in the fire water supply system as the backup system of the electric fire pump set to solve the reliability problem of the fire water supply system. Various instruments and meters are used to monitor the operating conditions of diesel engine fire pumps in real time to ensure the stable operation of automatic control. It is a good solution to the failure of electric fire pumps in the fire water supply system, and has achieved a good market.

Flow：250-10000 GPM
Head： 3-16 Bar
Power：11-1000 kw
The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

The XBC-ZWC Diesel Engine Self-priming Pump is a powerful and versatile solution for various water transfer applications. Designed with reliability and efficiency in mind, this self-priming pump is specifically engineered to handle water transfer tasks with ease. Whether you need to move water from one location to another, drain flooded areas, or supply water for irrigation, the XBC-ZWC Diesel Engine Self-priming Pump is your trusted companion.

Routine maintenance includes checking for any signs of damage, testing the pump, driver, and controller, inspecting and cleaning the suction and discharge pipes, and ensuring the proper operation of auxiliary equipment like jockey pumps.

Multistage pumps are designed to transfer cleaning liquids through multiple impellers in series instead of one, and are typically used in installations that require high lift. High pressure applications can be achieved by mounting the impellers on the same shaft of the multistage pump or on opposite shafts parallel to each other for higher flow rates. They are mainly used for energy saving and different range of flow/head situations.