End suction DJ pump set

CDL stainless steel vertical multistage pump has the remarkable characteristics of small size, light weight, high efficiency, energy saving, low vibration and noise, smooth operation, long service life, vertical installation, small footprint, light weight and beautiful appearance.

1. Choose a fire pump with good performance and reliable quality.

2. The fire pump should be suitable for the working pressure and flow rate required by the fire fighting system.

3. Pay attention to the safety performance, reliability and stability of the fire pump.

4. Check whether the fire pump meets the requirements of the relevant national standards.

5. Pay attention to the after-sales service of the fire pump manufacturer.

6. Consider the cost performance of the fire pump.

7. Choose a fire pump from a qualified manufacturer.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar
The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations.

Fire pump system is made of Diesel+Jockey pump
1. Diesel engine pump, can use single stage pump, horizontal split case pump, end suction pump, multistage pump, material can be cast iron, stainless steel, and bronze impeller , with fuel tank, water tank，fan, control box
2. Jockey pump, horizontal or vertical, capacity will be small, but head should be higher than electric and diesel engine pump
Jockey material casing: cast iron, shaft and impeller: SS304

1.Flow：30-9000 GPM
2.Head： 3-20 Bar 40-300 psi
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min
The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations.

Floating impeller axial force tone- balancing device
The balancing slice device has two gaps, the radial gap behind the impeller and the axial gap of the balancing slice, because of these two gaps, the balancing slice can automatically acclimate the axial l gap to achieve automatic balance of axial force, and the tableware rotor is in a floating state.

The principle of the balance plate is scattered to the impeller, the impeller back mouth ring radial concurrence below the axial concurrence, this device that’s the same as the balance plate, the conformation of two gaps, only in a different position. Because the impeller has these two gaps to round each other, so that the impeller can also achieve automatic balance of axial forces.

Functional description of fire pump control system, which is composed of electric motor fire pump, diesel engine fire pump, common chassis, water outlet pipeline and various valves. The operation of the unit is operated by hand. The diesel engine fire pump is equipped with a fuel tank with a running capacity of 6 hours. The electric fire pump set has a starter cabinet and a manual button box, which is convenient and feasible to operate. In addition to the entire structure of the manual control unit, the automatic motor fire pump unit and diesel engine fire pump unit also have an automatic control panel mainly composed of PLC. Automatic control panel function The automatic control panel receives the fire alarm signal.

“Fire-fighting gas top-pressure water supply equipment is usually composed of basic components such as air-pressure water tanks, control cabinets, top-pressure gas storage systems, and decompression release devices; in the fire-fighting state, compressed gas is charged into the air-pressure water tank to replace the fire-fighting water storage in the tank. , and always maintain the rated working pressure of fire protection, and the fixed fire water supply equipment that supplies water to the fire pipe network.”

Application Scope
Equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

Using Instruction
Altitude: ≤ 1000m;
Ambient temperature: +5 °C ~ +40 °C;
Relative humidity: <= 90%.

Yes, modern fire pumps typically come with safety shutoff features to prevent damage from overheating, low oil pressure (for diesel pumps), or running dry. These features are designed to protect the equipment and prolong its life, though in critical applications, it’s vital that shutoff mechanisms do not compromise firefighting capabilities.

Although the electric fire pump has the advantages of simple operation and maintenance, the design specifications of most fire protection systems stipulate that when using the electric fire pump set, it should have the condition of double circuit power supply, and usually should have the diesel engine fire pump set as a backup pump set. Electric fire pump sets are driven by electric motors, and there are many varieties with different structures such as horizontal and vertical. The electric fire pump set has a small footprint, light weight, low noise, and good start-up and operation performance.

Fire pump as the name implies, fire pump, according to different classification is divided into different kinds of it is fully sealed, no leakage, corrosion resistance, widely used in environmental protection, water treatment, fire departments, is used to pump all kinds of liquid equipment.

1. Check the system pressure and increase if necessary.
2. Check the seals and gaskets for wear and replace if needed.
3. Check the pipe joints for any leakage and repair if needed.
4. Replace any worn or damaged parts.
5. Check the valves for any leakage and repair if needed.
6. Check the suction and discharge lines for any obstruction and clear if necessary.
7. Inspect the pump for any signs of corrosion and repair or replace if needed.
8. Check and adjust the pressure settings if needed.
9. Perform regular maintenance and service of the pump.

Residential buildings may have specific regulations governing fire pump installations, depending on factors like building size, occupancy, and local codes. Compliance with these regulations is crucial for ensuring safety.

Troubleshooting common issues with fire pumps involves systematic checks of components, electrical systems, and fluid dynamics. Regular maintenance and having a qualified technician perform diagnostic tests are essential.

The application of fire pumps is not only in fire protection systems, but a variety of fire pumps are gradually showing their superior strength in industrial production and urban construction. This includes the implementation and expansion of high-end technologies for industrial and urban water supply and drainage, and high-rise building underpressure water delivery.

1. Disconnect the power and turn off the fuel source.

2. Remove any remaining fuel in the pump.

3. Clean the pump with a mild detergent and warm water.

4. Flush the pump with clean water.

5. Grease the bearings and any moving parts of the pump.

6. Reassemble the pump.

7. Reconnect the power and fuel source.

8. Test the pump to ensure it is functioning properly.

containerized fire pump system 750gpm with electric fire pump, diesel engine fire pump, jockey pump and controllers for each pump, and these all fitted in the 40″ container.

Fire-fighting package set water supply equipment manufactured by is referred to as
“dual-power”, “Fire Pump Set” hereinafter as “dual-power”, “Fixed Fire Pump Installation
Standard” and “Standard for the Fixed Fire Pump Installation Standard” of the
American Fire Protection Association in accordance with China Standard GB27898.5-2011
Fixed Fire-fighting Water Supply Equipment Part 5 “Fire Dual-power Installation of
Stationary Pumps for Fire Protection -2016 design and manufacture. Comply with the
latest Chinese national standard CCCF certification requirements and obtain the
certificate. Dual power is one of the reliable products in fire fighting water supply equipment.

The electric fire pump set is a medium and low pressure fire pump product developed by our company in strict accordance with the technical requirements of the national standard GB6245-2006 (fire pump) and the National Fire Protection Association NFPA20 (installation of centrifugal fire pumps). The product has passed the type inspection of the National Fixed Fire Extinguishing System and Refractory Component Quality Inspection Center.

Electric fire pump: It is an important part of the fire water supply system. Divided into ordinary type and foam type. The ordinary type is used for general fire water supply; the foam type is equipped with an adjustable proportion mixer and a cam pump, which can deliver the mixed liquid to various foam launching devices to extinguish various oil fires. The electric fire pump consists of two parts, the motor and the pump. The pump and the motor are coaxial. The pump structure includes pump body, rotor, pump cover, mechanical seal and other components.

The diesel engine fire pump and the electric fire pump are “one standby and one use”. The control boxes of the diesel engine fire pump and the electric fire pump should be kept independent of each other, and the diesel engine fire pump must be used as the backup pump of the electric fire pump, and cannot be used as backup for each other.

The pump start signal in the fire extinguishing system is directly connected to the electric fire pump control box, and it is not suitable to be connected to the diesel engine fire pump control box at the same time. The pump start fault signal of the electric fire pump control box and the pump start signal in the fire extinguishing system are used as the automatic start pump start signal of the diesel engine fire pump control box, and the line is connected to the control box of the diesel engine fire pump. The pump start failure signal of the diesel engine fire pump control box received an alarm from the fire control center. After receiving the alarm, the authorized personnel rushed to the pump room to force the diesel pump to start in an emergency.

A fire pump system typically includes the pump itself, a driver (usually an electric motor or diesel engine), a controller, and various accessories like suction and discharge piping, check valves, and pressure gauges.

Because of the width required by our customer, this fire pump set is designed in in-line. Capacity and total head are 34m³/h@8bar.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Yes, fire pumps can operate in high-altitude locations, but their performance may be affected due to reduced atmospheric pressure, which can impact water flow and engine performance. It’s essential to select pumps specifically designed or adjusted for high-altitude use, ensuring they meet the required pressure and flow rates.

The diesel engine fire pump has the characteristics of good starting performance, serious load operation, compact structure, time-saving and labor-saving maintenance, simple application, and high level of automatic control technology. It is a security monitoring device with reliable performance.

Diesel engine fire pumps are often used for emergency water supply in high-rise buildings, water companies, steel plants, wineries, chemical plants, hotels, hospitals, and other large-scale projects. Diesel engine fire pump is suitable for unattended emergency water supply system. The product has the characteristics of advanced technology, high degree of automation, superior performance, complete protection functions, reasonable structure, simple installation, and high cost performance. net pressure.

Fire pumps are subject to rigorous testing and maintenance protocols to ensure they are always ready to operate in an emergency. This typically includes regular weekly or monthly churn tests, where the pump runs without discharging water, and annual flow tests, which verify that the pump can achieve its rated flow and pressure. These tests are crucial for identifying potential issues, such as wear and tear on components, blockages in the piping, or problems with the power supply. Additionally, fire pumps must be inspected for leaks, corrosion, and other signs of deterioration. Regular maintenance, including lubrication, alignment checks, and part replacements, helps extend the pump’s lifespan and ensures its reliability when needed most.