Energy-Efficient Water Supply: The Advantages of Variable Frequency Technology

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy-saving and environmentally friendly vertical centrifugal pump developed by the company’s technical staff on the basis of absorbing the advanced technology of similar products at home and abroad, and using the performance parameters of domestic general centrifugal pumps. This series of pumps has excellent performance, high reliability, long life, reasonable structure and beautiful appearance, and has a leading level in the industry.

The equipment from Better Technology Group is debugging now

. The rotor part is composed of shaft, impeller, impeller retaining sleeve, shaft sleeve and other parts, and the water inlet section, middle section and water outlet section are connected by tension bolts. The shaft seal adopts a mechanical seal, lubricated and cooled by the pressure water in the balance chamber.

Small frequency conversion water supply equipment is a kind of equipment developed under the support of frequency conversion speed regulation system and frequency conversion technology. Its application in water supply equipment management shows good economy and environmental protection. Life and production play a very important role.

Petrochemical process pumps are suitable for conveying clean or liquids containing a small amount of particles, low temperature or high temperature liquids, neutral or corrosive liquids. Suitable for oil refining, petrochemical, coal processing and cryogenic engineering, papermaking, metallurgy, medicine, synthetic fiber, power generation, environmental protection, etc.

Fire pumps are a type of pump used in fire fighting. Compared to ordinary pumps, fire pumps have higher standards and requirements in terms of sealing, corrosion resistance and operational efficiency. Before running the fire pump equipment, we need to discharge the gas inside the pump, do you know what is the significance of doing so? The following is the answer from Shanghai Xizhiquan.

1. If there is gas inside the fire pump, then the equipment cannot form a sufficient vacuum during operation, resulting in the liquid not being able to be sucked up. This phenomenon is called gas binding, and is a phenomenon that often results from many operators not understanding this operation.
2, understand the formation of gas binding causes, we will understand how to avoid this problem occurs. Before the fire pump equipment is started, the pump casing needs to be filled with liquid. In the pump suction pipe mouth need to be equipped with a non-return valve, can effectively avoid the pump in the liquid due to gravity into the low tank, if the pump position is low, there is no need to carry out filling the pump.
3. The compressed gas inside the fire pump will occupy a certain space in the fire pump, making it impossible to seal it.

Therefore, the operation of deflating the fire pump before putting it into use can increase the vacuum of the equipment and increase the pumping capacity of the pump, thus effectively improving the efficiency of the equipment and reducing the waste of resources.

The diesel engine with right-angle gearbox combination is a high-performance power transmission solution widely used in various industrial applications. It features a diesel engine as the primary power source and a right-angle gearbox for efficient power redirection and speed matching. This compact and reliable duo enhances production efficiency, reduces energy consumption, and provides a stable power source for industrial automation and ship propulsion systems. Its adaptability to diverse climate conditions and load demands further reinforces its significance in modern industries.

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

It can be seen from the working process of the surge tank that if there is no surge tank, because water is an incompressible fluid, a slight change in the amount of water will lead to changes in pressure accumulation. Therefore, whether it is a box-type variable frequency constant pressure water supply equipment or a non-negative pressure water supply equipment, the pressure stabilizer tank is essential.

The domestic water supply equipment system is equipped with storage tanks and other water storage facilities, which saves the floor area and reduces the construction load, thereby saving a large amount of civil engineering investment costs. The intelligent and automatic operation of the equipment does not require a special person to be on duty, which saves management costs, and there is no water quality treatment instrument, which eliminates the need for regular cleaning and disinfection; the loss of system dripping, leakage, and overflow is reduced.

WQ (QW、WQK ) series submersible sewage pump applicable to transport containing solids and fiber of sewage or clean water.

This device is suitable for fighting Class A (ordinary combustibles like wood, paper, and textiles), Class B (flammable liquids such as gasoline, oils, and alcohols), and some Class D (combustible metals like magnesium and titanium) fires, depending on the foam concentrate type used.

Air conditioning pump is a pump designed for sewage discharge. Air conditioning pump is suitable for heavy, polluted condensate drainage needs, can be used for high temperature and weak acid condensate removal (temperature -46~95℃), can be used in air conditioning system and refrigeration equipment.

The most advanced externally mounted PTFE bellows mechanical seal is adopted, which has multi-layer protection and prolongs the service life of the mechanical seal. When conveying the medium containing impurity particles, it can be equipped with single-end hard-to-hard (silicon carbide to silicon carbide) without cooling water. ) mechanical seal, so users need to consider the solid content in the medium when selecting models.

Volume:500-2000L

The non-negative pressure variable frequency water supply equipment takes the municipal pipe network as the water source, and makes full use of the original pressure of the municipal pipe network to form a closed continuous relay pressurized water supply mode, with good energy saving effect and no secondary pollution of water quality. Development and extension of water supply equipment.

1500rpm,200kw, diesel engine generator, which can use for the diesel mobile pump.

XBD-S fire pump is a horizontal split structure type. The suction port and the discharge port are below the axis of the pump, and the horizontal direction is perpendicular to the axis. The pump of this structure type does not need to disassemble the inlet and outlet pipes during maintenance. Installation and maintenance is very convenient. The rotor as a whole
The combined parts can be hoisted as a whole for easy maintenance, and the same rotor part can be used for reverse rotation. The bearings at both ends are made of high-precision imported deep groove ball bearings, which have smooth operation, low noise and long service life.
Shaft seals are available in two types: mechanical seals or packing seals, and users can choose by themselves.

The special hydraulic design and structural design make it more suitable for building fire-fighting water supply system with flow and pressure grading than ordinary centrifugal clean water pumps, and the flow-pressure characteristic curve is flat and has no hump. All parts of the friction parts due to rotation are made of wear-resistant, corrosion-resistant and anti-meshing materials, which have high reliability. The multi-stage pump can be equipped with double water outlets, which has high bearing capacity, strong anti-overload capacity and sensitive starting. .

The fire water supply pressure booster pump complete sets of equipment is the equipment for the firefighting project. The main function is to maintain the firefighting pressure of the fire extinguishing pipe network. When a fire alarm is opened, the fire extinguishing equipment can immediately spray the solid water column, and the alarm linkage starts the large fire pump. Win the initial fire extinguishing time of more than 30 seconds until the full load of the fire main pump is started. Because the equipment can maintain the pressure of the pipe network at all times, the pipe network does not have air to start. The fire pump does not slam, the pipe network has no risk of vibration.

Regular testing and maintenance can help prevent failures. In case of a failure during an emergency, follow your facility’s emergency response plan and contact professional fire services immediately.

The constant pressure variable frequency water supply equipment is an advanced system designed to maintain stable water pressure while ensuring energy-efficient water supply. It utilizes variable frequency technology and an intelligent control system to dynamically adjust pump speed and water pressure based on real-time water demand. This eliminates energy wastage caused by frequent start-stop cycles in traditional systems, providing users with a constant water pressure supply for stable and reliable water distribution during peak and off-peak periods. The equipment’s intelligent control system enables remote monitoring and automatic alarms, improving operational reliability and maintenance efficiency. Widely applied in industrial, construction, agricultural, and municipal sectors, this energy-efficient solution optimizes water supply systems to meet diverse user demands effectively.

The integrated prefabricated sewage pumping station of Beide Technology Group Co., Ltd. serves the glass production base in Xingan County Development Zone, Ji’an, Jiangxi Province. On-site commissioning training is delivered to relevant departments. Thank you and leaders for the support.

1. Industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, long-distance transportation, cooling tower water supply, garden sprinkler irrigation, refrigeration flushing, bathroom and other cold and warm water circulation increase Pressure and equipment matching
2. Food, pharmacy, brewing, metallurgy, chemical industry, textile, wood processing, papermaking, high temperature hot water pressurized circulation transportation of boilers in restaurants, bathrooms, hotels, etc. and urban housing heating circulation pumps
3. Petroleum, chemical, metallurgical, electric power, paper, food, pharmaceutical and synthetic fiber sectors
4. Petroleum products such as gasoline, kerosene, diesel
5. Power station water supply and drainage, farmland drainage and irrigation and various water conservancy projects.
6. Pump rooms for key projects, central air-conditioning and scientific research institutions, hospitals, etc.

The Fire Pressure Stabilization Equipment, coupled with the CDL Vertical Multistage Fire Pump, offers a comprehensive solution to elevate fire safety measures. This powerful combination ensures a consistent water pressure for effective fire suppression. By incorporating pressure stabilization technology, this system guarantees an uninterrupted fire water supply, efficient water distribution, and reliable operation of fire hydrants and sprinkler systems. With advanced infrastructure and the ability to maximize firefighting capabilities, this configuration significantly enhances overall fire safety standards. Investing in fire pressure stabilization equipment is a proactive step towards ensuring superior fire protection and providing peace of mind in critical situations.

Explosion-proof motor is a type of motor with explosion-proof performance. The measures taken are: the electrical equipment cover is installed in a casing, which has a structure that can withstand the explosion pressure of the internal explosive mixture and can prevent the internal explosion from spreading to the explosive mixture around the casing (flameproof type); make the motor Live parts are not likely to generate sparks, arcs or dangerous temperatures sufficient to cause an explosion hazard, or isolate live parts that could produce these phenomena from the explosive mixture so that they cannot come into contact with each other or to the extent that they are explosive (increase safety type, ventilation type, etc.). In all kinds of environments with explosive danger, it is very important to choose the explosion-proof motor matched with all kinds of equipment correctly.

The YE2 series three-phase induction motor is inline with IE3 effieiency standard in the provisions of IEC60034-30-2008. And
the improvement of the efficiency in its design is in line with the state’s requirements on the energy saving and consumption
reducing of the manufacturing sector.
YE2  series motors with the mounting dimension in accordance with standard IEC60034,1t has good features like optimum
structure, attractive appearance, low noise, high efficiency, high protection class as well as high insulation class. YE2 series motors
can be widely used in various kinds of general use machineries like fans, pumps, machin tools, compressors, transportation and
so on, and can also be used in the hazardous areas with oil and chemical, steel plants, mining industry

1. Compact structure, small size, small footprint
2. Easy maintenance, stable and reliable operation, less leakage, the shaft seal is a mechanical seal
3. Motor plus rain cover
4. High efficiency, long service life and light weight