Explore Standard Capacities in Horizontal Foam Tanks

These are pictures of an EJ fire pump set control panel. The cabinet is made of galvanized sheet.

The device operates by drawing foam concentrate from a storage tank and blending it with water at a set ratio, often using a venturi or a balanced pressure system. The mixed solution is then pressurized and delivered through fire hoses, nozzles, or sprinkler systems to the fire scene.

Petrochemical process pumps are suitable for conveying clean or liquids containing a small amount of particles, low temperature or high temperature liquids, neutral or corrosive liquids. Suitable for oil refining, petrochemical, coal processing and cryogenic engineering, papermaking, metallurgy, medicine, synthetic fiber, power generation, environmental protection, etc.

“Fire-fighting gas top-pressure water supply equipment is usually composed of basic components such as air-pressure water tanks, control cabinets, top-pressure gas storage systems, and decompression release devices; in the fire-fighting state, compressed gas is charged into the air-pressure water tank to replace the fire-fighting water storage in the tank. , and always maintain the rated working pressure of fire protection, and the fixed fire water supply equipment that supplies water to the fire pipe network.”

The non-negative pressure variable frequency water supply equipment takes the municipal pipe network as the water source, and makes full use of the original pressure of the municipal pipe network to form a closed continuous relay pressurized water supply mode, with good energy saving effect and no secondary pollution of water quality. Development and extension of water supply equipment.

The electrical control cabinet of fire pump set mainly has the functions of starting and stopping the pump, switching between main and standby pumps, manual and automatic switching, dual power switching, patrol inspection, protection, and feedback for mechanical emergency start.

The multistage fire pump consists of two parts: the motor and the pump, and the motor and the pump are coaxial. The structure of the pump consists of pump body, impeller, pump cover, mechanical seal and so on. The inlet and outlet of the pump are on the same horizontal axis and have the same caliber specification, so the loading and unloading is very convenient, and the floor space is small. The pump is fitted with a base for easy installation and increased pump stability. It is used to transport clear water without solid particles, liquids with physical and chemical properties similar to water. It is mainly used for pressurized water delivery in fire-fighting system pipelines, and is also suitable for industrial and urban water supply and drainage.

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy-saving and environmentally friendly vertical centrifugal pump developed by the company’s technical staff on the basis of absorbing the advanced technology of similar products at home and abroad, and using the performance parameters of domestic general centrifugal pumps. This series of pumps has excellent performance, high reliability, long life, reasonable structure and beautiful appearance, and has a leading level in the industry.

The domestic water supply equipment system is equipped with storage tanks and other water storage facilities, which saves the floor area and reduces the construction load, thereby saving a large amount of civil engineering investment costs. The intelligent and automatic operation of the equipment does not require a special person to be on duty, which saves management costs, and there is no water quality treatment instrument, which eliminates the need for regular cleaning and disinfection; the loss of system dripping, leakage, and overflow is reduced.

The workers from Better Technology Group are installing pump station outside

Submersible sewage pump is suitable for conveying sewage and dirt with particles in chemical industry, petroleum industry, pharmaceutical industry, mining industry, paper industry, cement plant, steel plant, power plant, coal processing industry, urban sewage treatment plant drainage system, municipal engineering, construction site and other industries. It can also be used for pumping clean water and corrosive media.

XBD series fire pumps are mainly used for the fixed fire hydrant firesystem, automatic spraying fire system used by all sorts of organs, projects, high-floor buildings etc. and can be trans ferred with the clear water without solid grain under 100 – ℃ or its equivalence, also be used for public-used water providing system for fire, living, production, construction and municipality.

Horizontal multi-stage pump is a kind of drainage pump, which is suitable for water supply and drainage in mines, factories and cities. It is used to transport clear water without solid particles or liquids with physical and chemical properties similar to clear water. The temperature of the medium being transported is 0 °C. ～80℃, the allowable inlet pressure is 0.6MPa.

The remote monitoring system for the water supply pump station is suitable for the remote monitoring and management of the pressurized pump station in the urban water supply system.
The pump station manager can remotely monitor the water level of the pump station pool or the entry pressure, the working status of the booster pump group, the outbound flow, and the exit pressure from the monitoring center; they can remotely control and automatically control the start and stop of the booster pump group; When optical fiber communication is used, the panorama and important stations in the station can be monitored by image, so that the pump station can be unattended.

The Fire Pressure Stabilization Equipment, coupled with the CDL Vertical Multistage Fire Pump, offers a comprehensive solution to elevate fire safety measures. This powerful combination ensures a consistent water pressure for effective fire suppression. By incorporating pressure stabilization technology, this system guarantees an uninterrupted fire water supply, efficient water distribution, and reliable operation of fire hydrants and sprinkler systems. With advanced infrastructure and the ability to maximize firefighting capabilities, this configuration significantly enhances overall fire safety standards. Investing in fire pressure stabilization equipment is a proactive step towards ensuring superior fire protection and providing peace of mind in critical situations.

The electric pump in the picture is ISW pump. ISW series horizontal single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly horizontal centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps. In addition, according to different operation temperatures and mediums, we developed the hot-water pump (ISWR), corrosion-resistant chemical pump (ISWH) and oil pump (ISWB).

Export fire pump set will be packaged with free fumigating wooden case.

Regular maintenance includes checking for leaks, ensuring all components are clean and in good working condition, and verifying the accuracy of the foam proportioning.

End suction centrifugal water pump is an energy-saving pump designed by teamwork in the whole nation, it is improved on a basis on model BA, B and other single-stage water centrifugal pump.

The ZWX box-type non-negative pressure water supply equipment is a pressurized water system designed to address inadequate municipal water pressure in critical settings such as hospitals and hotels, where water cannot be shut off. It also serves as an ideal solution for meeting the domestic water needs of high-rise buildings and, specifically, fulfilling the water requirements of schools. This equipment ensures a continuous water supply, even during maintenance or emergency situations, effectively resolving the challenges posed by low water pressure. With its efficient pressurized water supply and advanced control technology, the ZWX equipment offers stable water pressure and flow rates, catering to the diverse demands of different settings.

Specification
1. Simple structure, reliable performance
2. Small size, light weight
3. Good corrosion resistance, low power consumption
Main features
1.Mechanical seal and packing seal
2.Types of stainless steel: 301, 304, 316L
Application
It is used for drainage of industry, agriculture and city and fire-fighting drainage.
Technology parameter
Flow Q (m3/h): 3.5-400
Head H (m): 3-125
Rotating speed N (r/min): 1450, 2900
Power P (kw): 0.55-90
Model explanation
IS/IR/IH 100 – 80 – 160 A
* IS — clear water centrifugal pump
* IR — heat water centrifugal pump
* IH —chemical centrifugal pump
100 — inlet caliber
80 — outlet caliber
160 — impeller diameter
A — first incision

The waste cone is providing quick visual confirmation of proper water flow in the fire pump system.

These photos show some of our diesel engine in stock. We cooperate with many diesel engine manufacturers to meet the needs of customers for different diesel engine brands.

WXZQ series fire pneumatic water supply equipment is composed of fire pressure stabilizing device, fire pump
and electric control system. As a complete set of equipment, it can meet all technical specifications of automatic
fire water supply. In addition, it can accept and process all kinds of fire signals, replace the fire control center,
and send out all kinds of operation and fault alarm signals.

This series pump is designed with excellent hydraulic models，it is excellent hydraulic performance and structural features ensure that the users can effctively reduced the operating cost of the pump in various applications.
Meet ISO2858, ISO9908, UL448 international standards.

The gasoline engine water pump is a centrifugal pump composed of a water pump and a bracket. It has the advantages of low cost, light weight, convenient maintenance, low manufacturing cost and low noise.

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly vertical centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps. In addition, according to different operation temperatures and mediums, we developed the hot-water pump (IRG), corrosion-resistant chemical pump (IHG) and oil pump (YG). This pump enjoys excellent performance, good reliability, long operation life, reasonable construction and nice appearance, which is outstanding in the industry.

Centrifugal pump is a blade pump that depends on the centrifugal force generated when the impeller rotates to deliver liquid. In the process of rotating the impeller, due to the interaction between the blade and the liquid, the blade will transmit mechanical energy to the liquid, so that the pressure of the liquid can be increased to achieve the purpose of conveying liquid.

In view of its excellent performance and cost performance, single screw pump has gradually been widely used in China in recent years. Its main features are strong adaptability to the medium, stable flow, small pressure pulsation, and high self-priming ability, which cannot be replaced by other pumps. Single screw pump is widely used in petrochemical, environmental protection, exploration and mining, medicine and food, shipbuilding industry, energy industry, papermaking, construction, mining, machinery and other industries.

ZX self priming pump diesel engine driven works for water or medium similar to water that viscosity below 5°E and temperature below 80°C(176°F). It is compact, easy to operate, running stable, easy to maintain, efficient, with long service life and large suction capacity.