Factory low price self-priming pump

The pump’s performance range: flow 130-9000m3/h, head 3.5-22m. Simple structure, reliable use, easy
installation, high efficiency, small body, light weight.

The device operates by drawing foam concentrate from a storage tank and blending it with water at a set ratio, often using a venturi or a balanced pressure system. The mixed solution is then pressurized and delivered through fire hoses, nozzles, or sprinkler systems to the fire scene.

It has the advantages of simple installation, small footprint, convenient maintenance and no noise. It is widely used in municipal engineering, factories, businesses, hospitals, hotels, residential areas and other sewage discharge.

The special hydraulic design and structural design make it more suitable for building fire-fighting water supply system with flow and pressure grading than ordinary centrifugal clean water pumps, and the flow-pressure characteristic curve is flat and has no hump. All parts of the friction parts due to rotation are made of wear-resistant, corrosion-resistant and anti-meshing materials, which have high reliability. The multi-stage pump can be equipped with double water outlets, which has high bearing capacity, strong anti-overload capacity and sensitive starting. .

Volume:500-2000L

The fire water supply pressure booster pump complete sets of equipment is the equipment for the firefighting project. The main function is to maintain the firefighting pressure of the fire extinguishing pipe network. When a fire alarm is opened, the fire extinguishing equipment can immediately spray the solid water column, and the alarm linkage starts the large fire pump. Win the initial fire extinguishing time of more than 30 seconds until the full load of the fire main pump is started. Because the equipment can maintain the pressure of the pipe network at all times, the pipe network does not have air to start. The fire pump does not slam, the pipe network has no risk of vibration.

The fire control cabinet is widely used in many high-rise buildings without tower water supply, fire deep well pump constant pressure water supply and other occasions. When the equipment fails, it can cut off the circuit or alarm with the help of protective electrical appliances, and play the role of warning and protective electrical appliances.

Small submersible fire pump is compact and lightweight characteristics, it plays an important role in farm irrigation and domestic water.

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L
The diesel fire pump system serves as a backup power solution, utilizing a diesel engine to provide power and ensure the fire pump’s reliable operation during electrical outages. The associated fuel tank is a crucial component for storing diesel fuel and providing a continuous supply to the diesel engine, ensuring a sustained water flow during fire incidents. The system not only boasts reliability but also requires minimal maintenance, backed by comprehensive after-sales service. Whether for large commercial buildings, industrial facilities, airports, or hospitals, this system offers users a dependable firefighting solution to safeguard security.

The housing of the diesel engine fire pump constitutes the working chamber of the pump. The impeller, shaft and rolling bearing are the rotors of the pump. Suspension bearing parts The supporting parts support the rotor parts of the pump, and the rolling bearings are subjected to the radial and axial forces of the pump. In order to balance the axial force of the diesel engine fire pump, most pumps have sealing rings at the front and rear of the impeller, and a balance hole on the back cover of the impeller. Because some pumps have little axial force, there is no seal on the back of the impeller. ring and balance hole. The axial sealing ring of the diesel engine fire pump is composed of packing gland, packing ring and packing to prevent air intake or large water leakage.

The sewage pump is a kind of centrifugal impurity and has many forms: such as submersible type and dry type. At present, the most common submersible type is the WQ type submersible sewage pump, and the most common dry type sewage pump is the W type horizontal sewage pump. And two types of WL vertical sewage pump. Mainly used to transport urban sewage, manure or liquid containing fiber. For the medium of solid particles such as paper scraps, the temperature of the conveyed medium is usually not greater than 80¡ãC.

XA Bare Shaft Pump under painting
XA100/32,XA100/20,XA100/26

IS end suction pump, export to Bangladesh. use for CHILLER PLANT EQUIPMENT

The submersible sewage pump has features such as easy installation and maintenance, high working efficiency, anti-clogging and anti-winding design, which make it an ideal choice for industrial, municipal or commercial waste discharge system, septic tank, piggery, farmland irrigation.

1.Enterprise unit waste water discharge.
2.Urban sewage treatment plant discharge system.
3.Hospital, hotel, high-rise building sewage discharge.

Oil-water separator is a device, divided into catering oil-water separator and industrial oil-water separator. Catering oil and water separator is used to treat sewage in the catering industry; Because of the requirements of environmental protection, the sewage produced by the ship machinery space in rivers and lakes must be treated, and the industrial oil-water separator is needed.

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

. The rotor part is composed of shaft, impeller, impeller retaining sleeve, shaft sleeve and other parts, and the water inlet section, middle section and water outlet section are connected by tension bolts. The shaft seal adopts a mechanical seal, lubricated and cooled by the pressure water in the balance chamber.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water lift pipe, etc. The specific fire pump model is determined according to the environment and performance requirements, and at the same time According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

The company introduced high-performance water pumps produced by German advanced technology. By using the prototype impeller and this type of impeller and its cutting, the pump has a full and broad model spectrum and high use efficiency. Within the range of model spectrum performance, the pump can provide
A pump that properly meets the working point of any flow and head required by the user.
It adopts the best hydraulic model at home and abroad that can self-balance axial force and radial force, with stable performance, high efficiency, compact structure, low vibration, high pressure resistance of the pump body, and convenient installation and maintenance.

It is composed of pressure water tank, control cabinet, top pressure gas storage system, decompression release device and other basic components; In the condition of fire fighting, the compressed gas is filled into the pressure water tank to replace the fire fighting water in the tank, and always maintain the rated working pressure of fire fighting, and the fixed fire water supply equipment for the fire fighting pipe network.

1500rpm,200kw, diesel engine generator, which can use for the diesel mobile pump.

Hygienic and clean to use, high efficiency, low noise, mild corrosion resistance and compact structure, beautiful appearance, small size, light weight, convenient use and maintenance, reliable sealing performance

The sewage lifting device is a system composed of a sewage pump, a water collecting tank, a control device, and related pipe fittings and valves, which is used to lift and transport waste water below the sewers or away from the municipal pipe network. It can effectively solve or avoid the problems existing in the traditional sump.

Specification: PHYM100/20、PHYM100/30、PHYM100/40、PHYM100/50、PHYM100/60、PHYM100/70、PHYM100/80、PHYM100/90、PHYM100/100

As a complete set of equipment, it can meet all technical specifications of automatic fire water supply. In addition, it can accept and process all kinds of fire signals, replace the fire control center,
and send out all kinds of operation and fault alarm signals. 

The waste cone is providing quick visual confirmation of proper water flow in the fire pump system.

The star connection-delta connection utilizes the two connection methods of the motor to achieve the purpose of step-down starting, reduce the starting current, and reduce the impact of excessive current on the power grid. Simply put, the stator is connected in star at the start of the motor and then switched to delta connection after starting, which is the starting method of star-delta buck start.

The pump integrates self-priming and non-clogging sewage discharge, adopts the axial return and external mixing type, and through the unique design of the pump body and the impeller flow channel, it does not need to install the bottom valve and irrigation water like the general self-priming clean water pump. It can also suck and discharge liquids containing large particles of solids and long fibers. It can be widely used in municipal sewage projects, river and pond aquaculture, light industry, papermaking, textiles, food, chemicals, electricity, fibers, pulp and mixed suspension. The ideal impurity pump.