Fire Pump Selection for Complex Industrial Processes

Fixed fire water supply equipment can use fire pumps driven by electric motors, or fire pumps driven by diesel engines. The international standard name of diesel engine fire pump set is “engineering diesel engine fire pump set”. It uses diesel engine as power to drive fire water pump, and outputs pressurized water or air foam mixture for fire extinguishing work.
When dual power supplies are required or in order to further improve reliability, fire water supply equipment often adopts fire pumps driven by diesel engines. After the various components of the diesel engine fire pump set have passed the strict certification test and passed the test, their reliability is much higher than that of the electric motor fire pump set.

Diesel engine fire pump has the advantages of light weight, small size, flexible movement, fast start, fast water discharge time, large fuel tank capacity, corrosion resistance, reliable use, convenient maintenance, fast automatic start, self-starting, and can be refueled after dry operation . Heavy-duty pump bearings last longer; other components are made of high-quality copper and stainless steel or customer. Diesel engine fire pump high efficiency open impeller design can handle large solids and abrasives while maintaining high flow rates and high volume air handling for use in more “well point dewatering projects”.

Experience efficient fluid transfer with the XBC-XA Diesel End Suction Pump. With its unique end suction design and powerful diesel engine, this pump offers reliable performance and exceptional pumping capacity. It is suitable for a wide range of applications, from industrial fluid transfer to fire protection systems. The XBC-XA Diesel End Suction Pump features automatic operation, advanced control systems, and automatic fault detection for added safety and convenience. Choose this versatile pump for reliable and efficient fluid transfer in various industries.

Flow：250-10000 GPM
Head： 3-16 Bar (40-232 psi)
Power：11-1000 kw
The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

The self-priming pump is a kind of water pump. The difference from other pumps is that it can separate water and gas by itself, form a negative pressure inside, and fill the diversion water. Before the new pump is used, a little water should be poured into the pump body, which is conducive to the rapid separation of steam and water. In addition, the installation position should be careful not to exceed its suction stroke.

The XBC-OTS Diesel Engine Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

We take pride in introducing the XBC 10-65-IS fire pump, a highly efficient and reliable equipment that will provide exceptional fire protection.
The XBC 10-65-IS fire pump has a wide range of applications. It is suitable for fire protection systems in various buildings, factories, warehouses, ports, and ships. Whether you are in a large office building in the city center or an industrial area far from the city, the XBC 10-65-IS fire pump can provide reliable firefighting support in emergency situations. It is an ideal choice for equipping your fire protection systems.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The Diesel Engine End Suction Fire Pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more. This firefighting pump set is equipped for emergency rescues and can operate efficiently even during power outages. Moreover, its end-suction design simplifies operation and saves installation time.

The XBC-ISO pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more. This firefighting pump set is equipped for emergency rescues and can operate efficiently even during power outages. Moreover, its end-suction design simplifies operation and saves installation time.

Product Overview
Product Introduction of XBC series diesel engine fire-fighting pump
XBC series diesel engine fire-fighting pump group is a new-style fire-fighting equipment developed in accordance with GB6245-98 and NEPA20 standard, and upon the fitted fire-fighting pumps (single-stage single-suction type, single-stage double-suction type and sectional multistage type), can be divided into XBC-IS, XBC-S and XBC-D three sub series. The equipment has a wide range of pressure and temperature and can be used for almost every occasion necessary for fire-fighting.
The diesel engine fitted with the equipment is an excellent product domestic or imported, features good starting performance, strong overload capacity, compact structure, easy maintenance and use and high degree of automation. The equipment is really a fire-fighting one advanced and reliable in performance.

Diesel engine fire pump, as a fixed fire extinguishing equipment, has been widely used in fire diversion, especially in the case of no power supply or abnormal power supply and other emergencies, other diesel engines can also be equipped as power engines according to the needs of users.

Flow：250-10000 GPM
Head： 3-16 Bar
Power：11-1000 kw
The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

1.Ambient temperature:
2.Ambient temperaturerange4℃~40℃;
3. working to improve the ambienttemperature every 5″C, its power decreased by 1%(to 25″C as the base
4.Aiude:
5.reference elevation 914m, the reference atmospheric pressure is 100KPa;
6. If the work to an altitude of over 1000m, reference should be corrected GB1105.1-1987 diesel engine power, you can consult the specific technical department
7. Relative humidity ≤80%(20C), outdoor allow 90%(when installed outdoors in the order presented, you can choose to configure the outdoor structure, protection class IP55)

Flow：80-4000 GPM
Head：3-15 Bar
Power：11-1000 kw
The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-200 mm
Frequency：50 or 60 Hz
Working Pressure：≤1.6 MPa

Check the three leaks (antifreeze, oil, gas) check the tubing, water pipe joints at the sealing surface, found a leak, should be resolved immediately. If the exhaust pipe, cylinder head gasket at the supercharger loose or leak phenomenon, it should be promptly ruled out.

Flow：80-4000 GPM
Head：3-15 Bar
Power：11-1000 kw
The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

Split-case and end-suction are two common types of centrifugal fire pumps. The main difference lies in the design of the pump casing. Split-case pumps have a horizontally split casing, while end-suction pumps have a single casing.

The split case pump is equipped with diesel engine. The Split case pump is designed as double suction, with excellent suction performance, even in large flow operation can also ensure high suction range.

Flow：250-10000 GPM
Head：3-16 Bar
The XBC-OTS Diesel Engine Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

When the diesel engine fire pump unit receives an effective fire signal, if the power supply system of the diesel engine fire pump is powered off, loses phase or the electric pump cannot start normally, the diesel engine fire pump unit will automatically start to run. Once the power supply system returns to normal or the electric pump can operate normally, it can automatically switch to the electric pump.

The biggest difference between a diesel engine fire pump and an electric water pump is that it has its own independent power supply system, which ensures the normal operation of the project without power or power supply. Its role is self-evident, and it can be said to be a great helper in fire emergency .

The fire pump is suitable for pressurizing water supply in the fire pipeline. The purpose is to transport clean water or other liquids with physical and chemical properties similar to clean water for pressurization. The temperature of the medium used by the horizontal pump is not higher than 80 °C, which is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, long-distance water supply, heating, bathroom and other cold and warm water circulation pressurization and equipment matching.

The XBC-IS diesel engine fire pump with wheels excels in terms of mobility, which is a significant advantage. It is equipped with sturdy and durable wheels, allowing you to effortlessly move the fire pump to the desired location. Whether in urban or rural areas, it can adapt to various terrains and environmental conditions. This convenient mobility makes the XBC-IS diesel engine fire pump with wheels an ideal emergency firefighting equipment.

Flow：80-4000 GPM
Head：3-15 Bar
Power：11-1000 kw
The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

The intelligent diesel engine fire pump products produced by our company are equipped with an unattended intelligent system as standard. The product has the characteristics of mature technology, high degree of automation, superior performance, complete protection functions, reasonable structure, simple installation and high cost performance. At the same time, in order to meet the different needs of users and reasonable investment, the products are divided into multiple application series such as fire pumps, industrial emergency pumps, agricultural water pumps, marine water pumps, trailer mobile water pump stations, etc., which can be linked and switched with electric fire pumps. Supporting water pumps: single-stage fire pump, multi-stage fire pump, single-stage split double-suction fire pump.

Diesel engine fire pumps offer unmatched efficiency and reliability in fire safety. With powerful diesel engines at their core, these pumps deliver high-pressure water flow to effectively combat fires. They operate independently of the electrical grid, ensuring uninterrupted functionality during power outages. Widely applied in building fire suppression, oil fields, and marine facilities, these pumps provide critical firefighting capabilities. Innovative features like automated control systems and energy-saving technologies further enhance their performance and sustainability. Diesel engine fire pumps are the epitome of efficient fire safety solutions.

The diesel engine fire pump has the characteristics of good starting characteristics, strong overload capacity, compact and reasonable structure, convenient maintenance, simple and reliable use, etc. The unit is equipped with protection functions such as overspeed, low oil pressure, three start failures, high water temperature, low oil level, and low battery voltage. Diesel engine fire pump is composed of diesel engine, chassis, cooling water tank and fan, high elastic coupling, water pump, diesel tank and control panel and other equipment. The diesel engine fire pump is directly connected with the diesel engine through a highly elastic coupling or a diaphragm coupling, and is installed on a common channel steel chassis.

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 

·NON-UL  Standard:
Flow：50-5000GPM 
Head： 40-250 PSI