Fluorine alloy centrifugal pump

High efficiency, flat performance curve, wide operating range, in line with the relevant regulations of the fire department, and can meet the needs of different users
Adopt segmented structure, stable operation, low noise, long service life, small footprint, easy installation and maintenance

Pump configuration power, high speed, small overall volume, simple structure, easy to maintain, but high temperature, easy to wear, maintenance factor. Therefore, the maintenance and maintenance of the pump is relatively difficult, in order to reduce the number of overhauls, we must do a good job of equipment maintenance and maintenance.

Electric fire pump controllers are designed to start an electric motor driven fire pump.Diesel engine fire pump contollers are designed to automatically start a diesel engine driven fire pump upon detection of a pressure drop in the fire protection system.

The air conditioning pump system is an indispensable part of modern HVAC systems, regulating the temperature within a building by circulating hot or cold water, providing a comfortable indoor environment. This article delves into the product features of air conditioning pump systems, helping you understand their significance and how to optimize the heating, ventilation, and air conditioning efficiency of your building.

The effectiveness of the foam solution depends on the type of foam concentrate and the conditions in which it is stored. Typically, the foam solution should be used immediately for optimal performance.

The double-blade impeller structure is adopted, which greatly improves the passing capacity of dirt.
The mechanical seal adopts a new type of grinding pair, and runs in the oil chamber for a long time;
The overall structure is compact, the volume is small, the noise is low, the energy saving effect is remarkable, the maintenance is convenient, and the user is convenient to replace;
Can be used within the design range without overloading the motor;

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

ZX self priming pump diesel engine driven works for water or medium similar to water that viscosity below 5°E and temperature below 80°C(176°F). It is compact, easy to operate, running stable, easy to maintain, efficient, with long service life and large suction capacity.

Quzhou Better Explosion Proof Motor CO.,LTD (Better Ex-proof)is the only onemanufacturer with explosion-proof motors national production license,explosionproof certificate in the West Region of Zhejiang.Created in 2004,mainly producesthree-phase asynchronous motors (Y,Y2,YX3,YE3),as well as special motorsYPT,flameproof three-phase asynchronous motor (YB,YB2,YB3,YBXn),alsoproduces submersible three-phase asynchronous motor YQ.Our company is nowdeveloping a dust explosion-proof three-phase asynchronous motors YFB and soon.Better Ex-proof also customize some non-standard motors for enterprises,forexample,long axis,polygon axis,and stainless steel shaft motors.The annuaoutput is r than 60000 sets.It is well sold around China and long exporteto Russia,alia,America,Canada,New Zealand,South Africa,Mideast.

The integrated prefabricated sewage pumping station of Beide Technology Group Co., Ltd. serves the glass production base in Xingan County Development Zone, Ji’an, Jiangxi Province. On-site commissioning training is delivered to relevant departments. Thank you and leaders for the support.

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy-saving and environmentally friendly vertical centrifugal pump developed by the company’s technical staff on the basis of absorbing the advanced technology of similar products at home and abroad, and using the performance parameters of domestic general centrifugal pumps. This series of pumps has excellent performance, high reliability, long life, reasonable structure and beautiful appearance, and has a leading level in the industry.

These pictures show electric motors of different powers. We can produce many kinds of motors to meet the different needs of customers.

PHYM100/20、PHYM100/30、PHYM100/40、PHYM100/50、PHYM100/60、
PHYM100/70、PHYM100/80、PHYM100/90、PHYM100/100

In this pump room, electric pump power is 315kw

The suction and discharge ports of the GDL vertical multistage pipeline centrifugal pump are located on the same straight line. The rotor part is composed of shaft, impeller, impeller retaining sleeve, shaft sleeve and other parts, and the water inlet section, middle section and water outlet section are connected by tension bolts. The shaft seal adopts a mechanical seal, lubricated and cooled by the pressure water in the balance chamber. It is an ideal pump type for the transportation of hot and cold water or liquids with similar physical and chemical properties to water in various industries.

This device is suitable for fighting Class A (ordinary combustibles like wood, paper, and textiles), Class B (flammable liquids such as gasoline, oils, and alcohols), and some Class D (combustible metals like magnesium and titanium) fires, depending on the foam concentrate type used.

The remote monitoring system for the water supply pump station is suitable for the remote monitoring and management of the pressurized pump station in the urban water supply system.
The pump station manager can remotely monitor the water level of the pump station pool or the entry pressure, the working status of the booster pump group, the outbound flow, and the exit pressure from the monitoring center; they can remotely control and automatically control the start and stop of the booster pump group; When optical fiber communication is used, the panorama and important stations in the station can be monitored by image, so that the pump station can be unattended.

1. The pump is a vertical structure, the inlet and outlet diameters are the same, and they are located on the same center line. It can be installed in the pipeline like a valve. The appearance is compact and beautiful, the floor space is small, and the construction investment is low. Can be used outdoors.
2. The impeller is directly installed on the elongated shaft of the motor, the axial dimension is short, the structure is compact, and the pump and motor bearings are reasonably arranged, which can effectively balance the radial and axial loads generated by the operation of the pump, thereby ensuring the smooth operation of the pump. Low vibration and low noise.
3. The shaft seal adopts mechanical seal or mechanical seal combination, adopts imported titanium alloy sealing ring, medium-sized high temperature resistant mechanical seal and hard alloy material, wear-resistant seal, which can effectively prolong the service life of mechanical seal.
4. Easy installation and maintenance, no need to dismantle the pipeline system, just remove the pump joint seat nut to extract all the rotor parts.
5. The series and parallel operation modes of pumps can be adopted according to the requirements of use, that is, the needs of flow and head.
6. The vertical and horizontal installation of the pump can be adopted according to the requirements of the pipeline arrangement.

The constant pressure variable frequency water supply equipment is an advanced system designed to maintain stable water pressure while ensuring energy-efficient water supply. It utilizes variable frequency technology and an intelligent control system to dynamically adjust pump speed and water pressure based on real-time water demand. This eliminates energy wastage caused by frequent start-stop cycles in traditional systems, providing users with a constant water pressure supply for stable and reliable water distribution during peak and off-peak periods. The equipment’s intelligent control system enables remote monitoring and automatic alarms, improving operational reliability and maintenance efficiency. Widely applied in industrial, construction, agricultural, and municipal sectors, this energy-efficient solution optimizes water supply systems to meet diverse user demands effectively.

Submersible sewage pump is a submersible sewage pump, especially suitable for conveying liquids containing hard solids, fibers and especially dirty, sticky, slippery liquids.

Volume:500-2000L

This large, high-efficiency firefighting foam canister is designed for industrial and professional settings, offering exceptional fire extinguishing performance and reliable safety assurance. Whether in factories, warehouses, or other high-risk environments, it is the best choice for fire rescue operations.

By reason that the axial pump can run in the water,axial pumps is helpful for simplifying the earth work and building engineering of pumping station, reducing installation area, and saving 30~40% of project total price. For integration of water pump and motor,axial pumps is unwanted to perform axis-to-center assembly procedure on site, very convenient and expeditious to install.

Municipal – flood control and irrigation, drought relief, manhole drainage, sewage sludge drainage, emergency repair drainage, no power supply and drainage.

Military – field water supply system, island freshwater collection system.

Agriculture – irrigation and drainage systems, cofferdam pumping, alternative stormwater pumping stations, temporary water transfer, areas without fixed pumping stations and without electricity.

The pump seal of the booster pump adopts a mechanical seal, which has the characteristics of reliable sealing and no leakage. It is usually used for water supply equipment for pressurizing the end of the fire network.
1. The diaphragm tank can be inflated for a long time and used for a long time, which can prevent water pollution.
Second, the equipment occupies a small area and saves investment, and it runs automatically.
Three, fault protection, fault automatic switching.

WXZQ series fire pneumatic water supply equipment is composed of fire pressure stabilizing device, fire pump
and electric control system. As a complete set of equipment, it can meet all technical specifications of automatic
fire water supply. In addition, it can accept and process all kinds of fire signals, replace the fire control center,
and send out all kinds of operation and fault alarm signals.

The equipment CONSISTS of frequency conversion control cabinet, no negative pressure device, automatic control system and remote monitoring system, water pump unit, voltage regulator compensator, negative pressure eliminator, pressure sensor, valve, instrument and piping system.

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

This large, high-efficiency firefighting foam canister is designed for industrial and professional settings, offering exceptional fire extinguishing performance and reliable safety assurance. Whether in factories, warehouses, or other high-risk environments, it is the best choice for fire rescue operations.

Centrifugal pump is a blade pump that depends on the centrifugal force generated when the impeller rotates to deliver liquid. In the process of rotating the impeller, due to the interaction between the blade and the liquid, the blade will transmit mechanical energy to the liquid, so that the pressure of the liquid can be increased to achieve the purpose of conveying liquid.

Suitable for use with clean water. For Fire hydrant water supply, sprinkler system, fire system voltage regulator.