Fuel Tanks: Ensuring Fire Pump Reliability

The constant pressure variable frequency water supply equipment is an advanced system designed to maintain stable water pressure while ensuring energy-efficient water supply. It utilizes variable frequency technology and an intelligent control system to dynamically adjust pump speed and water pressure based on real-time water demand. This eliminates energy wastage caused by frequent start-stop cycles in traditional systems, providing users with a constant water pressure supply for stable and reliable water distribution during peak and off-peak periods. The equipment’s intelligent control system enables remote monitoring and automatic alarms, improving operational reliability and maintenance efficiency. Widely applied in industrial, construction, agricultural, and municipal sectors, this energy-efficient solution optimizes water supply systems to meet diverse user demands effectively.

The hand-carried fire pump has the advantages of small footprint, convenient maintenance, and easy portability. It is more advantageous in areas where fire-fighting vehicles cannot pass. The hand-carried fire pump is ideal for drainage, drought resistance, greening, water supply and emergency disaster rescue. equipment.

End suction pumps usually have one impeller and a volute type casing. They work when the pumped liquid increases velocity as it moves along the vanes of the impeller; then the liquid moves into the volute casing, where a diffusion process converts the high velocity to high pressure.

UL Fire Pump Motor IP23 meet UL1004-5 standard

The fire control cabinet is widely used in many high-rise buildings without tower water supply, fire deep well pump constant pressure water supply and other occasions. When the equipment fails, it can cut off the circuit or alarm with the help of protective electrical appliances, and play the role of warning and protective electrical appliances.

Petrochemical process pumps are suitable for conveying clean or liquids containing a small amount of particles, low temperature or high temperature liquids, neutral or corrosive liquids. Suitable for oil refining, petrochemical, coal processing and cryogenic engineering, papermaking, metallurgy, medicine, synthetic fiber, power generation, environmental protection, etc.

Non-negative pressure frequency conversion water supply equipment is a new type of water supply equipment developed on the basis of frequency conversion constant pressure water supply equipment.

The air conditioning pump system is an indispensable part of modern HVAC systems, regulating the temperature within a building by circulating hot or cold water, providing a comfortable indoor environment. This article delves into the product features of air conditioning pump systems, helping you understand their significance and how to optimize the heating, ventilation, and air conditioning efficiency of your building.

Centrifugal pump is a blade pump that depends on the centrifugal force generated when the impeller rotates to deliver liquid. In the process of rotating the impeller, due to the interaction between the blade and the liquid, the blade will transmit mechanical energy to the liquid, so that the pressure of the liquid can be increased to achieve the purpose of conveying liquid.

This large, high-efficiency firefighting foam canister is designed for industrial and professional settings, offering exceptional fire extinguishing performance and reliable safety assurance. Whether in factories, warehouses, or other high-risk environments, it is the best choice for fire rescue operations.

The pump’s performance range: flow 130-9000m3/h, head 3.5-22m. Simple structure, reliable use, easy
installation, high efficiency, small body, light weight.

1. The pump is a vertical structure, the inlet and outlet diameters are the same, and they are located on the same center line. It can be installed in the pipeline like a valve. The appearance is compact and beautiful, the floor space is small, and the construction investment is low. Can be used outdoors.
2. The impeller is directly installed on the elongated shaft of the motor, the axial dimension is short, the structure is compact, and the pump and motor bearings are reasonably arranged, which can effectively balance the radial and axial loads generated by the operation of the pump, thereby ensuring the smooth operation of the pump. Low vibration and low noise.
3. The shaft seal adopts mechanical seal or mechanical seal combination, adopts imported titanium alloy sealing ring, medium-sized high temperature resistant mechanical seal and hard alloy material, wear-resistant seal, which can effectively prolong the service life of mechanical seal.
4. Easy installation and maintenance, no need to dismantle the pipeline system, just remove the pump joint seat nut to extract all the rotor parts.
5. The series and parallel operation modes of pumps can be adopted according to the requirements of use, that is, the needs of flow and head.
6. The vertical and horizontal installation of the pump can be adopted according to the requirements of the pipeline arrangement.

Use sanitary cleaning, high efficiency, low noise, mild corrosion resistance and compact structure, beautiful appearance, small size, light weight, convenient maintenance, reliable sealing performance

LW series vertical non-clogging sewage pump is a pump product successfully developed based on the characteristics of domestic water pumps. It has the characteristics of excellent energy saving effect, anti-winding, non-clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long-fiber waste. Compared with the traditional impeller, the impeller adopts the form of single flow channel or double flow channel. It is similar to a curved pipe with the same cross-section and has very good flow capacity. With a reasonable volute chamber, the pump has high efficiency, The impeller is tested by dynamic and static balance, and the sewage pump is automatically stirred so that the pump has no vibration during operation.

The waste cone is providing quick visual confirmation of proper water flow in the fire pump system.

The multistage pump is a centrifugal pump in and out of the water section and the middle section, through the rod combination together, its output water pressure can be very large, but also depends on the rotation of the impeller to obtain the centrifugal force, so that the material. When the gas density reaches the working range of the mechanical vacuum pump, it is extracted, and the high vacuum is gradually obtained.

The effectiveness of the foam solution depends on the type of foam concentrate and the conditions in which it is stored. Typically, the foam solution should be used immediately for optimal performance.

Foam proportioning systems enhance the fire suppression capabilities of water, reduce the amount of water needed, minimize water damage, and can effectively smother fires by cutting off the oxygen supply.

WQ (QW、WQK ) series submersible sewage pump applicable to transport containing solids and fiber of sewage or clean water.

Multi-stage fire fighting pump adopts special hydraulic design and structural design make it more suitable for building fire fighting water supply system than ordinary centrifugal clear water pumps, with a flat flow-pressure characteristic curve and no hump. Better Technology Company provide vertical and horizontal types.

Features:
The double-blade impeller structure is adopted, which greatly improves the passing capacity of dirt.
The mechanical seal adopts a new type of grinding pair, and runs in the oil chamber for a long time;
The overall structure is compact, the volume is small, the noise is low, the energy saving effect is remarkable, the maintenance is convenient, and the user is convenient to replace;
Can be used within the design range without overloading the motor.

Fuel tank specifications：200L/ 400L/ 600L/ 800L/ 1000L/
1200L/ 1500L/ 1800L/ 2100L/ 2500L/ 3100L/ 3600L/ 4100L/ 4500L
The diesel fire pump system serves as a backup power solution, utilizing a diesel engine to provide power and ensure the fire pump’s reliable operation during electrical outages. The associated fuel tank is a crucial component for storing diesel fuel and providing a continuous supply to the diesel engine, ensuring a sustained water flow during fire incidents. The system not only boasts reliability but also requires minimal maintenance, backed by comprehensive after-sales service. Whether for large commercial buildings, industrial facilities, airports, or hospitals, this system offers users a dependable firefighting solution to safeguard security.

The fire water supply pressure booster pump complete sets of equipment is the equipment for the firefighting project. The main function is to maintain the firefighting pressure of the fire extinguishing pipe network. When a fire alarm is opened, the fire extinguishing equipment can immediately spray the solid water column, and the alarm linkage starts the large fire pump. Win the initial fire extinguishing time of more than 30 seconds until the full load of the fire main pump is started. Because the equipment can maintain the pressure of the pipe network at all times, the pipe network does not have air to start. The fire pump does not slam, the pipe network has no risk of vibration.

Filter is an indispensable device on the transmission medium pipeline, usually installed in the pressure reducing valve, pressure relief valve, fixed water level valve, square filter other equipment import end equipment.

Submersible sewage pump is suitable for conveying sewage and dirt with particles in chemical industry, petroleum industry, pharmaceutical industry, mining industry, paper industry, cement plant, steel plant, power plant, coal processing industry, urban sewage treatment plant drainage system, municipal engineering, construction site and other industries. It can also be used for pumping clean water and corrosive media.

Starting mode
* Direct online <15kw * Y-△ voltage reduction startup 15kw~75kw (don’t adapt to submersible sewage pump control equipment) * Self-coupling voltage reduction startup >15kw (adapt to submersible sewage pump)
* Soft starter startup >15kw
Control mode
Y — automatically control the start and stop of the pump according to the height of the liquid
P — automatically controls the start and stop of the pump according to the pressure. Used in life and fire water supply and drainage pressurization system
T — Control the start and stop of the pump according to the set-up temperature. Used for constant temperature and heat exchange system

Integrated Prefabricated Pump Station

The pump station is supplied as an integrated unit. It includes a pump station cylinder, pressure pipeline, maintenance platform, maintenance ladder, grill filter, coupling system, pump lifting system, ventilation, anti-skid manhole cover, lighting system, etc.

According to CFO fluid dynamics finite element analysis, the base structure is optimized to prevent sludge deposition in sewage treatment and no odor residue.

All internal installation and commissioning work is completed in the factory. The pump station is only installed on the site, which greatly reduces the civil construction period and engineering cost, and reduces the overall investment of the owner.

The pumping station cylinder is made of FRP, and the internal fittings are made of anti-corrosion materials such as SUS304 and hot-dip galvanizing. No maintenance is required, and the normal service life can reach more than seven years.

Intelligent operating system, easy to understand, to run, monitoring without personnel supervision

Welcome your inquiry!

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly vertical centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps. In addition, according to different operation temperatures and mediums, we developed the hot-water pump (IRG), corrosion-resistant chemical pump (IHG) and oil pump (YG). This pump enjoys excellent performance, good reliability, long operation life, reasonable construction and nice appearance, which is outstanding in the industry.

The device operates by drawing foam concentrate from a storage tank and blending it with water at a set ratio, often using a venturi or a balanced pressure system. The mixed solution is then pressurized and delivered through fire hoses, nozzles, or sprinkler systems to the fire scene.

Capacity:50-1000L
Type:
Single-Wall Fuel Tank
Double-Wall Fuel Tank