High-Performance EJ Fire Pump: 1250 GPM 160PSI Capacity

Fire pump system include Diesel engine pump + Electric motor pump+Jockey pump. Sometime, it just include Electric pump+Jockey pump.
Its power: 1.0 to 20kw, flow: 15-300gpm, head: 3-10bar, 50/60hz. The material: Cast iron or SS, bronze impeller.

A typical firefighting pump system consists of the pump itself, intake and discharge hoses, nozzles, strainers or filters to prevent debris from entering the pump, and sometimes additional accessories like foam injection systems for enhanced fire suppression capabilities.

EDJ Fire fighting package set

120≤ Q≤1000GPM
H＜150m
The EDJ fire pump group is composed of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the stabilized pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

There are four types fire pump, including end suction pump, split case pump, multiage pump and vertical turbine pump. These fire pumps may bepowered by an electric motor or diesel engine and on rare occasion powered by a steam turbine.

When the fire pump is in operation, if the power supply of the motor fire pump power supply is turned off or the electric pump fails to start normally, the diesel engine fire pump will automatically start and run. During normal operation, there is a fully automatic switchover to an electric pump.

Safety precautions include wearing appropriate protective gear, ensuring proper ventilation when operating gasoline or diesel-powered pumps indoors, following proper procedures for fueling and starting the pump, and maintaining a safe distance from flames and hazardous materials.

The large-scale EDJ electric diesel dual-drive fire pump is a fire-fighting water supply equipment designed and manufactured by Beide Technology Co., Ltd. according to the <> standard, and has obtained 3CF certification. There are many models of Baide dual-power fire pumps, which can be customized according to needs.
Large-scale EDJ electric diesel dual-drive fire pump Pumps for various fire hydrants, sprinkler fire main pumps; suitable for various fire pressurization and voltage stabilization pumps; various villas, residential areas and other fire protection systems; industrial and civil building fire protection System; suitable for various oil depots, oil product loading and unloading terminals, logistics parks and other places with high fire protection level requirements.

As the name implies, fire pumps are used in firefighting. They are divided into different types according to different classification methods. They are widely used in environmental protection, water treatment, firefighting and other departments to pump various liquids due to their fully sealed, leak-free, and corrosion-resistant characteristics. , It is the ideal pump for creating leak-free, pollution-free civilized workshops and civilized factories.

It’s a customized EJ fire pump set consisting of electric pump, jockey pump along with control panel, and accessories. It is equipped with priming tank for doing negative suction.

Diesel engine fire pump, as a fixed fire extinguishing equipment, has been widely used in fire diversion, especially in the case of no power supply or abnormal power supply and other emergencies, other diesel engines can also be equipped as power engines according to the needs of users.​​

Diesel engine fire pumps are suitable for use in fire water supply environments with high head and high flow rate or as backup fire water supply pumps. The reason is that the diesel engine has strong power and can be used with large flow fire deep well pumps, and the diesel engine fire pumps have the characteristics of self-starting when power is off. Emergency water supply is available, so diesel engine fire pumps are favored.

Using Instruction£º
Altitude ¡Ü 1000m;
Ambient temperature: +5 ¡ãC ~ +40 ¡ãC;
Relative humidity: <= 90%. Application Scope£º Equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

• Automatic switching between three pumps, when the electric fire pump fails, the diesel engine backup pump will automatically start
• Works even with power outages
• Adopt high-quality NSK bearing, wear-resistant mechanical seal or packing seal
• Product parameters available upon request

400gpm, 8bar fire pump set
electric fire pump, 400gpm, 8bar, 37kw;Diesel engine fire pump:400gpm, 8bar,46kw; jockey pump 5.5kw

EJ dual-power fire pump group is used for various fire hydrants and sprinkler fire main pumps; it can more reliably ensure water safety in the event of a fire. EJ dual-power fire pump set is designed and manufactured by Beide Technology Co., Ltd. in accordance with GB 27898.5-2011 Fixed Fire Water Supply Equipment Part 5 <>. It meets the new 3CF requirements and has obtained 3CF certification for fire protection products. EJ small dual-power diesel engine fire pump is used for various fire hydrants and sprinkler fire main pumps; it is suitable for various fire boosting and pressure stabilizing pump occasions; various villas, residential areas and other fire protection systems; industrial and civil building fire protection systems ;Applicable to various oil depots, oil loading and unloading docks, logistics parks and other places with high fire protection requirements.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

The fire pump set adopts ISW pump. ISW series horizontal single-stage single-suction centrifugal pump is a new generation of energy-saving and environmentally friendly horizontal centrifugal pump developed by our company by absorbing the advanced technology of similar foreign products and adopting the general performance parameters of domestic centrifugal pumps.

In addition, according to different operation temperatures and mediums, we developed the hot-water pump(ISWR), corrosion-resistant chemical pump(ISWH) and oil pump (ISWB). This pump enjoys excellent performance, good reliability, long operation life, reasonable construction and nice appearance, which is outstanding in the industry.

product description:
EDJ fire pump set consists of diesel engine fire pump, electric pump set and stabilized pump to form an automatic fire water supply system
1. Electric pump, single-stage pump, horizontal split pump, end-suction pump, multi-stage pump, the material is cast iron or stainless steel, and the impeller can be made of copper impeller
2. Diesel engine pump, the flow rate is the same as that of the electric pump. The diesel engine is connected by a highly elastic coupling or a universal joint to form a fire pump set. The set also includes fuel tanks, water tanks, fans, control panels and other components.
3. Stabilizer pump, horizontal or vertical, small flow, higher lift than electric pumps and diesel pumps
4. Control cabinet, automatic control of electric pump, diesel engine pump and stabilized pump, with overload, overcurrent protection
5. The accessories include check valve, gate valve, air pressure tank (0.6mpa, 1.0mpa, 1.6mpa), pressure gauge, pressure sensor, common inlet and outlet pipeline, soft joint, flange and common base.

1. Electric fire pump: various end suction pumps and split pumps.
2. jockey pump: vertical, small flow, higher lift than electric or diesel pumps.
3. Control panel: Automatically control the water pump with overload and overcurrent protection.
4. Accessories: suction pipe, discharge pipe with flange, battery, gate valve, check valve, flexible expansion joint, pressure switch, pressure gauge, base, etc

UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

The ED Dual-Power Fire Pump System combines electric and diesel engine pumps to ensure uninterrupted fire protection and a reliable water supply. In the event of power outages or electrical failures, the diesel engine pump seamlessly takes over, guaranteeing continuous operation of the fire protection system. This dual-power configuration offers both reliability and flexibility, providing comprehensive coverage for fire safety needs. With smart controls and automatic switching mechanisms, the transition between electric and diesel engine pumps is seamless, minimizing system downtime. Equipped with advanced safety features, including monitoring and alarm systems, real-time status updates allow for prompt action in case of any irregularities.

With the advent of the information age, people have higher requirements for the quality of life, and fire safety is particularly important for high-rise buildings. The state attaches great importance to fire safety work. All workplaces require us to be equipped with fire safety facilities, and fire pumps are necessary water intake equipment for fire infrastructure. The commonly used fire pumps in my country are electric fire pumps and diesel fire pumps. The difference between the two is that electric fire pumps require a power system, and diesel engine fire pumps can be started at any time to fill the original position of electric fire pumps.

A fire pump is a crucial component of a fire protection system that provides the required water pressure to deliver water to the fire sprinkler system or other firefighting equipment, ensuring an adequate supply of water in case of a fire emergency.

The motor of this EJ fire pump set is directly connected to the pump body, which saves costs. It adopts ISW pump, and its performance parameters and technical indicators meet relevant standards. It has the characteristics of high efficiency and reasonable structure. It is suitable for industrial and urban water supply and drainage, high-rise building increase Pressurized water supply, garden sprinkler irrigation, long-distance water supply, heating, bathroom and other hot and cold water circulation pressurization and equipment.

Flow: 30-9000 GPM
Head: 3-20Bar
Speed: 740-2900r/min
Material: HT200, SS304, Bronze

The EJ Dual Power Fire Pump System is an innovative and reliable fire protection solution. Combining an electric pump for robust water pressure and flow with a top-quality jockey pump for stable pressure maintenance, this system ensures efficient and timely water supply during fires. With advanced automation, remote monitoring, and energy-saving features, the EJ Dual Power Fire Pump System is a trusted choice for commercial, industrial, and residential applications.

The diesel engine fire pump has the characteristics of good starting performance, serious load operation, compact structure, time-saving and labor-saving maintenance, simple application, and high level of automatic control technology. It is a security monitoring device with reliable performance.

The use of fire pumps is generally based on different situations. Different types will have different classification methods. The fire pump is in its own fully sealed state, without the possibility of leakage, and can resist corrosion. , is widely used, and is mainly used in fire protection, sewage treatment and some departments of environmental protection. It is used to pump different liquids, so that there is no leakage and no pollution. It is very civilized A kind of fire engine, which is very beneficial to the use of all of us.

Fire pump system is made of Diesel+Jockey pump
1. Diesel engine pump, can use single stage pump, horizontal split case pump, end suction pump, multistage pump, material can be cast iron, stainless steel, and bronze impeller , with fuel tank, water tank，fan, control box
2. Jockey pump, horizontal or vertical, capacity will be small, but head should be higher than electric and diesel engine pump
Jockey material casing: cast iron, shaft and impeller: SS304

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

– Specialized Fire Suppression Systems: Implementing fire suppression systems designed for hazardous waste materials.
– Explosion-Proof Equipment: Using explosion-proof equipment to prevent ignition of flammable or explosive materials.
– Regular Maintenance and Inspections: Conducting regular maintenance and inspections to ensure system reliability.
– Compliance with Environmental Regulations: Adhering to stringent environmental and safety regulations specific to hazardous waste handling.