High-Pressure Electric Motor for Unbeatable Fire Response

Fire pumps are widely used in our production and life, such as in water treatment, fire safety and other departments. After the reform and opening up, it is widely used in life and production due to its characteristics of complete sealing, no leakage, and corrosion resistance.

Explosion-proof pumps are mainly used in some dangerous places with strict requirements for explosion-proof. Such as: chemical plants, gas stations, etc. Therefore, explosion-proof standards must be met in these places, otherwise it will cause unnecessary safety hazards. The explosion-proof pump adopts an explosion-proof enclosure, which can isolate the electrical parts of sparks, arcs and dangerous temperatures that may be generated during the conveying of the medium from the surrounding explosive gas mixture.??

The horizontal pipeline pump is a horizontally arranged pumping device used for conveying liquids or gases. It consists of an electric motor, pump body, impeller, and sealing device. Compared to vertical pipeline pumps, the horizontal pipeline pump offers advantages such as a smaller space requirement, convenient maintenance, stable operation, and wide applicability. Its horizontal layout helps reduce axial and radial loads, thereby enhancing the pump’s stability and operational efficiency. The horizontal pipeline pump is suitable for conveying various liquids or gases and can be selected based on specific process requirements and medium characteristics. It is recommended to consult with professional engineers or pump suppliers when purchasing and using a horizontal pipeline pump to ensure the selection of suitable equipment.

Philippines order us the booster pump set
The booster pump set normal use for water supply system
Use CDL type pump, flow is not big, but pressure higher

The OTS Double-Suction Split-case centrifugal Pump with High-Pressure Electric Motor is an exceptional firefighting equipment. This powerful combination delivers high flow rates and unmatched pumping efficiency, ensuring robust and continuous firefighting actions. Its compact design allows for quick deployment and rapid response, making it suitable for various settings. From rural wildfires to urban firefighting needs, this firefighting pump safeguards communities of all sizes, representing the pinnacle of safety and protection.

The pumps used in firefighting are divided into different types according to different classification methods. With its fully sealed and non-leakage characteristics, it is used in environmental protection, water treatment, fire-fighting and other departments to pump various liquids. It is a non-leakage, civilized The ideal pumps for workshops and civilized factories are similar to the types of pumps for fire protection systems, but the head and flow are different.

The lifespan of a fire pump depends on factors like maintenance, usage, and environmental conditions. With proper maintenance, fire pumps can last for several decades.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-400 mm
Frequency：50 or 60 Hz

Yes, electric fire pumps can be used in various types of buildings, including residential, commercial, industrial, and institutional structures. The key is to ensure the pump system is appropriately sized and configured to meet the specific fire protection requirements of the building.

The video shows electric fire pump that bare shaft pump is XA series. XA series single-stage centrifugal pump is the earliest single-stage single-suction centrifugal pump product launched by Better (China)Technology Co., Ltd. This product combines the advantages of similar products in China and abroad, and is designed with excellent hydraulic model. Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operation cost of pumps in various applications.

The vertical turbine pump can be used to transport liquids such as clear water below 55°C, rainwater, scale water, sewage, industrial wastewater with corrosive irritation, sea water, etc.; after special design, it can transport liquids at 90°C. It is widely applicable to industrial and mining enterprises such as water supply companies, sewage treatment plants, power plants, steel plants, and mining, as well as engineering projects such as municipal road engineering water supply and drainage, farmland irrigation, and flood control and drainage.

The pump is the horizontalL structure, the inlet and outlet are the same in diameter, and lying in the same center line, which can be installed in the pipeline as valve, the floor space needed is small,if the protection cover is added, it can be put in the open air.

The hot water pump is also a hot water pump product optimized on the basis of the ISG and ISW centrifugal pump series, especially the IRG hot water circulating pump has the largest consumption, because the pump adopts the vertical installation of the motor on the upper part, and the connection between the pump and the motor. There is also a short bracket in between, which will not cause the water in the motor to burn out the motor due to the leakage of the mechanical seal, and it can also be designed as a mechanical seal on the basis of the IRG hot water pump. The maximum temperature of high temperature pump products can reach 240 ¡ã C.

Before start:

Turning the clutch by hand, there should be no jammedphenomenon at the turner position.
Opening the inlet valve and the vent valve, letting the waterfill into the pump’s chamber, then closing the vent valve.
Clicking the switch of motor, and confirming whether theturning is right or not.

Running:

Fully opening the inlet valves, and closing the valves of theoutlet pipe.
Connecting the power, Opening the valves of the outlet pipeand adjusting the needed working point when the turning velocityis normal.
Watching whether there exist abnormities or not, if yes,should the pump be stopped and inspected before re-running.

Stop:

After turning off the outlet valves one by one, shutting offthe power.
Shutting off the inlet valves.
If the ambient temperature is below 0 , some warm-℃keeping measures should be adopted.

Electric fire pumps offer several advantages compared to other types of fire pumps, such as diesel-driven or steam-driven pumps. Here are some of the key advantages of electric fire pumps

ISG vertical single-stage single-suction centrifugal pump
1.Suction pressure≤1.0Mpa, or maximum operation pressure
of pump system≤1.6Mpa, that is, pressure in suction nozzle+pump
lift≤1.6Mpa. If operation pressure of pump system is higher than
1.6Mpa, it should be indicated in order, so that we can use more
reasonable material for flow and connecting parts in pump.
2. Ambient temperature＜40℃ ＜ , relative humidity 95%.
3. In the conveyed medium, solid particles should be less than
0.1% in unit volume, and granularity＜0.2mm.

The single-suction pump sucks in horizontally and axially, and spit out radially upwards. The pump is a suspension structure, and the rotor parts can be withdrawn for maintenance without disassembling the inlet and outlet pipelines during maintenance. The pump is connected with the motor through a common elastic coupling or an extended elastic coupling, and the shaft seal of the pump is sealed with a soft packing. The bearing is a single row radial ball bearing, lubricated with lubricating oil. From the motor side, the pump rotates clockwise.

The OTS Double-Suction Split-case centrifugal Pump with High-Pressure Electric Motor is an exceptional firefighting equipment. This powerful combination delivers high flow rates and unmatched pumping efficiency, ensuring robust and continuous firefighting actions. Its compact design allows for quick deployment and rapid response, making it suitable for various settings. From rural wildfires to urban firefighting needs, this firefighting pump safeguards communities of all sizes, representing the pinnacle of safety and protection.

Self-priming pump is a self-priming centrifugal pump. It has the advantages of compact structure, convenient operation, stable operation, easy maintenance, high efficiency, long life, and strong self-priming ability.

The horizontal single-stage single-suction fire pump has the characteristics of beautiful appearance, compact structure, less rotor winding, relatively stable operation, low vibration and low noise, convenient installation and use, and durable. The horizontal fire pump has a wide range of uses and is suitable for use in fire protection systems, pressurization systems, urban water supply and drainage, etc.

Vertical fire pumps are widely used in our lives, such as in water treatment, fire safety and other departments. At the same time, it also has the characteristics of full sealing, no leakage and corrosion resistance, and is widely used in life and production. In transportation It also shows its excellent characteristics in terms of storage and storage, and has become a device that is needed in many places now.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

The sizing of a fire pump is determined by evaluating factors such as the water demand of the fire protection system, building size, and the available water supply. Fire protection engineers typically perform these calculations.

The XBD-DL vertical multistage fire pump is a top-tier technology designed to enhance the safety and efficiency of building fire protection systems. With advanced design and technology, this pump offers excellent corrosion resistance and durability, making it suitable for various environmental conditions. Its high-performance turbine blade design and efficient motor ensure powerful water pressure and flow, enabling rapid and effective water delivery. The intelligent monitoring system and fault alarm function enhance the pump’s reliability and availability. By choosing the XBD-DL vertical multistage fire pump, you gain an innovative and efficient solution to enhance the safety and efficiency of your fire protection system.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

The horizontal explosion-proof oil pump has a simple structure, convenient maintenance, can be fixed and installed without vibration, good sealing, low noise, convenient maintenance and low price. It can be used for garden sprinkler irrigation, high-rise building water supply and drainage, metallurgy, mining, food, chemical and fire protection systems and other industries to transport water, chemical media and other liquids.

The XBD 6.0-30G-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

The fire pump is used to pump various liquids. It is an ideal pump and fire system for building civilized factories, non-leakage, and pollution-free civilized workshops. It is often installed on fire extinguishing systems, fire trucks or other fire-fighting facilities for transportation Special pump for fire extinguishing with water or foam solution. Pipeline fire pumps are widely used in water treatment, environmental protection, fire protection and other departments.

The Horizontal Multistage Pump is an exceptional engineering solution that offers high performance and reliability for fluid handling applications. With its unique multistage impeller design, it delivers efficient and incremental pressure boosting for high-pressure and high-flow scenarios. Whether used in water supply systems, industrial processes, irrigation, or building cooling, this pump ensures stable water pressure and flow. Its compact design allows for easy installation and maintenance, while its superior construction materials guarantee durability and long-term reliable operation. Choose the Horizontal Multistage Pump to achieve exceptional performance and success in your fluid handling projects.

Flow: 30-5000 GPM
Head: 3-20.5BAR
Speed: 980~ 3550 r/min

Vertical turbine pumps are used to extract normal temperature water and warm water below 100¡ãC from wells, rivers, lakes and seas. It is more suitable for urban, factory sewage and water with high sand content in rivers and seas, and is widely used in factories and mines, cities and countries, planting and farmland irrigation. They are also used for groundwater supply in municipalities that do not depend on surface water.