Horizontal End Suction Pump Head

There are many applications of fire pumps, and different motors are selected according to the flow rate and head size. Common motors include electric motors, diesel engines, etc. The electric motor fire pump is a relatively important water supply equipment in the fire protection system. Available in many settings, providing an adequate water supply is key to ensuring emergency use.

Equipment control function description
The equipment is designed to have one use and one standby function. The main pump runs
normally, and the standby pump starts automatically after the main pump fault .Control
cabinet with two start ways: remote start function and site start. (DC24V provided; Two
startup modes are available for users to select)
◆ Automatic start state
First, the switch to the “automatic” position, and then the remote startup instruction
sent. Upon receiving the startup instruction, it will immediately enter the running state, and
then the corresponding fire pump (jockey pump) indicator light on, the system will run the
main pump.Stop the running fire pump (jockey pump)remove the remote start instruction.
◆ Manual start state
First, put the switch to the “manual” position, press “fire pump start up” or “pressure
jockey pump start up” , then fire pump (jockey pump)operation indication lights on, then
enter the running state. When the fire pump (jockey pump) is running, press the “fire pump
stop or jockey pump stop button and the fire pump (jockey pump )stops running

Vertical turbine pump is a kind of centrifugal pump. From the perspective of centrifugal pump, it is improved from the performance of submerged pump. The pump can be used to transport rainwater, iron oxide water, sewage, corrosive Industrial wastewater, seawater and other liquids. Widely used in water companies, sewage treatment plants, steel plants, mines and other industrial and mining enterprises, as well as municipal water supply and drainage, farmland irrigation, flood control and drainage projects.

Ensure compliance by following the guidelines set by organizations such as the National Fire Protection Association (NFPA) and conducting regular inspections and maintenance as required.

The fire pump is mainly a kind of pump equipment used for fire emergency, and its function is to transport the water source to the fire scene for fire extinguishing. In life, fire pumps are widely used in various buildings, such as factories, docks, warehouses, ports and other places, and are important equipment for fire emergency.

Flow：50-7500 GPM
Head：3-20 Bar
The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

Electric vertical turbine pump with high efficiency, energy saving and high efficiency, pump impeller immersed in water, no bottom valve, no irrigation and shaft vacuum, can be directly started, very convenient and reliable.

The lifespan of a fire pump depends on factors such as usage, maintenance, and environmental conditions. With proper maintenance and regular testing, fire pumps can have a service life of 20 years or more. However, individual components may need replacement during this period.

It shows details of electric vertical turbine pump that has high efficiency. Type JC pumps are used for pumping normal temperature water and warm water under 100°C from wells, river, lake, sea.

The Vertical Inline pump is used for conveying liquids. It consists of an electric motor, pump body, impeller, and sealing device. The pump is suitable for conveying various liquids and can be selected based on specific process requirements and medium characteristics.

The OTS Double-suction End-suction Pump is a pump that combines the characteristics of a double-suction pump and an end-suction pump. It is designed for high flow and medium head liquid transfer and circulation systems in industrial applications. This pump features double-suction characteristics and an end-suction structure, making it suitable for balancing liquid flow and ensuring stability and efficiency. The end-suction design allows for easy installation and maintenance, particularly in spaces with limitations. The OTS Double-suction End-suction Pump offers high efficiency and is widely applicable in various applications, including water supply systems, cooling water circulation, petrochemicals, and industrial processes. When selecting and using this pump, specific operational requirements and flow rates should be considered, and consultation with professional engineers or pump suppliers is recommended to ensure the appropriate equipment is chosen for safe and reliable operation.

·UL Standard:
Flow:50-500GPM
Head:6-16 Bar（90-230PSI）
·Non-UL Standard:
Flow：50-5000 GPM
Head：3-16 Bar（40-232 psi）

Vertical multi-stage fire pumps are mainly used in engineering construction enterprises and institutions. The system includes fixed fire protection systems, indoor fire hydrant fire extinguishing systems in high-rise buildings, and automatic sprinkler fire extinguishing systems. A medium similar to water in nature, the public water supply system can be used for fire protection, life, production, construction, etc.

Flow：50-7500 GPM
Head：3-20 Bar
The Vertical Turbine Fire Pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

1. Better is a professional fire pump manufacturer with 17 years of industry experience
2. Professional sales team and R&D team, strong technical skills, self-produced control system
3. The motor is self-produced and can produce 50/60HZ

D-type horizontal, single-suction multi-stage, segmented centrifugal pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. For conveying clean water or other liquids with physical and chemical properties similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump flow parts, the sealing form and increasing the cooling system

Before start:

Turning the clutch by hand, there should be no jammedphenomenon at the turner position.
Opening the inlet valve and the vent valve, letting the waterfill into the pump’s chamber, then closing the vent valve.
Clicking the switch of motor, and confirming whether theturning is right or not.

Running:

Fully opening the inlet valves, and closing the valves of theoutlet pipe.
Connecting the power, Opening the valves of the outlet pipeand adjusting the needed working point when the turning velocityis normal.
Watching whether there exist abnormities or not, if yes,should the pump be stopped and inspected before re-running.

Stop:

After turning off the outlet valves one by one, shutting offthe power.
Shutting off the inlet valves.
If the ambient temperature is below 0 , some warm-℃keeping measures should be adopted.

Flow：50-5000 GPM
Head：3-16 Bar (40-232 psi )
Power：11-1000 kw
Frequency：50 or 60 Hz
ISO end-suction pumps find wide application in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants, oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

Benefits include:

Sustainability: Reduce the environmental impact by using renewable energy sources such as solar or wind power.
Energy Security: Enhance energy security by reducing dependence on grid power and fossil fuels.
Cost Savings: Lower operating costs over time by utilizing free or low-cost renewable energy.
Resilience: Improve system resilience by incorporating renewable energy sources with battery storage, providing reliable power during outages.

Vertical Multistage Electric Fire Pump is a kind of vertical non-self priming multistage centrifugal pump, which is driven by a standard electric motor.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, the impeller, the pump shaft, the bearing, the coupling, the sealing form, the lifting pipe, etc. The specific fire pump model is determined according to the environment and performance requirements. According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

This series of pumps adopts a vertical structure, which can better save the floor space, has the characteristics of high efficiency, wide application range, flexible installation forms and convenient maintenance.

Long-shaft pump is a kind of centrifugal pump. From the perspective of centrifugal pump, it is improved from the performance of submerged pump. This pump can be used to transport rainwater, iron oxide water, sewage, corrosive industrial Wastewater, seawater and other liquids. Widely used in water companies, sewage treatment plants, steel plants, mines and other industrial and mining enterprises, as well as municipal water supply and drainage, farmland irrigation, flood control and drainage projects.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

In all fire pumps, we generally consider the two parameters of flow and head, because these two parameters are the most important. 30% of customers do not know what determines the power of fire pumps. In fact, the flow and head are the key to determine the power of the fire pump.

The submersible axial-flow pump is a special type of submersible pump designed for handling large flow rates with relatively low head conditions. It has a wide range of applications, including agricultural irrigation, urban water supply and drainage, municipal flood control and emergency rescue, as well as various water conservancy projects.

The end suction pump works by rotating the impeller to make the water centrifugally move. Before starting the centrifugal pump, it is necessary to fill the pump casing and the suction pipe with water, and then start the motor to make the pump shaft drive the impeller and the water to rotate at a high speed. It flows into the pressurized water pipeline of the single-suction pump. According to the material type and the different configurations of the sealing system and cooling system, the single-stage single-suction pump has a wide range of applications. The end suction pump can pump clear water media, and can be used in air conditioning, heating, pressurization, building water supply, fire protection buildings, etc. It can pump chemical media similar to water and other corrosive liquid media, and can be used in chemical, horizontal, pharmaceutical, metallurgy, petroleum and other fields.

The electric fire pump is mainly used for pressurizing water supply in the pipeline of the fire protection system. It can pressurize and supply water to the pipeline of the fire protection system in various occasions, such as in the fire hydrant fire extinguishing system, in the automatic sprinkler fire extinguishing system, and in the water spray fire extinguishing system. Pressurized water delivery is possible.

End-suction centrifugal pump is a non-self-priming, single-pole single-suction, pump body and base fixed, its maximum working flow can reach 1200 cubic meters per hour, so this series of pumps fully meet the needs of fire water supply, can improve its extinguishing speed. The mechanical seal of this series adopts the standard wear-resistant mechanical seal, and the bearing adopts the bearing frame, which can locate the bearing, avoid the serial movement of the bearing, and at the same time improve the rigidity of the rotor parts, so this series of pumps use The lifespan will also be longer. At the same time, this series of water pumps also have the functions of stable operation, convenient maintenance and low operating noise, so this series of water pumps is the first of the fire system equipment.

There are many structural types of self-priming pumps, among which molten salt pumps, vacuum pumps, submerged pumps, metering pumps, gear pumps, corrosion-resistant pumps, acid-resistant pumps, and fire pumps flow in the direction of rotation. Then it joins with the water from the right return water hole and flows along the volute. This repeated cycle gradually exhausts the air in the suction pipeline, so that the water enters the pump to complete the self-priming process. Sewage pump self-priming pump oil pump diaphragm pump screw pump gear oil pump pump is the same, the difference is that the return water does not flow to the outer edge of the impeller, but flows to the inlet of the impeller. When the internal mixing self-priming pump is started, the return valve at the front and bottom of the impeller must be opened, so that the liquid in the pump flows back to the inlet of the impeller. Here the air is expelled and the water is returned from the return valve to the impeller inlet. This is repeated until the air is exhausted, and the water is sucked into the internal-mixed self-priming pump. The working principle is the same as that of the external-mixed self-priming pump.