Horizontal fire pump is a common fire fighting equipment

Flow：250-10000 GPM
Head：3-16 Bar
In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants, oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

Pumps type IS is a kind of axial suction centrifugal pump with single stage and suc-tion.
It is used to pump clear water and physical or chemical liquid similar to clear water below85℃, and is widely applied to industries, to citywater supply and drain, and also to agricultural and orchard irrigation.

OTS split case pump is applicable to hydraulic engineering, irrigation and drainage pump station, fire protection system, marine application and oil refining industry. The pump has low noise and good stability, and ensures a comfortable environment in use.

Long shaft pump is suitable for conveying belt particles, high viscosity, strong acid, alkali, salt, strong oxidant and other corrosive media. The motor part is placed on the liquid level, the pump part is placed under the liquid level, with strong corrosion resistance, no blockage, high temperature resistance and other characteristics. A new type of

Horizontal fire pumps have significant advantages such as high efficiency, low operating noise, good anti-cavitation performance, reasonable structure, and long service life. , Long-distance water delivery, heating, bathroom, boiler cold and warm water cycle pressurization, air conditioning and refrigeration system water delivery and equipment matching and other occasions.

D-type horizontal multistage centrifugal pump is a single-suction multistage segmental centrifugal pump with advanced and reasonable structure, high pump efficiency, good cavitation resistance, low vibration, stable and reliable operation, and long life.

Electric vertical turbine pump with high efficiency, energy saving and high efficiency, pump impeller immersed in water, no bottom valve, no irrigation and shaft vacuum, can be directly started, very convenient and reliable.

Application
Split case pumps are specifically designed and
tested for fire service application around the
world including:
1.Office buildings
2.Hospitals
3.Airports Manufacturing facilities
4.Warehouses Power stations
5.Oil and gas industry
6.Schools/colleges
7.Hotels

Flow：50-5000 GPM
Head：3-16 Bar
The XA series single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing.

The OTS Double-suction Split-case centrifugal pump is a widely used centrifugal pump in industrial and water supply systems. It features a double-suction design with two suction inlets on either side of the pump. This pump offers high efficiency, stability, and reliability due to its rational design and advanced fluid dynamics principles. It can handle large flow rates and high heads, making it suitable for various applications. The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. The long shaft pump provides flexibility through customization options and multiple driving choices. It is a reliable solution for water supply, sewage treatment, and chemical processes. Choose the long shaft pump for reliable and efficient fluid handling in your engineering projects.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces. They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.

Series OTS pumps are single stage,double suction with horizontally split casings.
They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105℃.
Series OTS pumps are available for capacities Of 68-18000m3/hr and heads of 70-200m.
They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

The IS series single-stage centrifugal pump is a reliable and versatile solution for fluid transfer applications. Known for its simplicity and ease of use, this horizontal centrifugal pump is designed to efficiently transport clear water and fluids with similar properties. With a compact structure and convenient maintenance, the IS pump offers stable and low-noise operation, making it suitable for a wide range of industrial, agricultural, and municipal tasks. Whether it’s for industrial cooling systems, municipal water supply, agricultural irrigation, or firefighting applications, the IS single-stage centrifugal pump provides efficient and dependable liquid handling. Its durable construction and corrosion-resistant materials ensure long-lasting performance.

The pressure stabilizer pump is used in conjunction with the air pressure tank, which is generally a complete set of equipment. Simply speaking, when the water in the air pressure tank decreases (that is, when the user uses it), the gas pressure in the tank decreases. To draw water, it can meet the user’s use pressure and the storage pressure in the tank at the same time. When the storage pressure in the tank reaches the standard, stop the pump and wait for the user to use it.

The vertical turbine pump is a vertical pump composed of single or multiple centrifugal or mixed flow impellers and guide casings, lift pipes, drive shafts, pump bases, motors and other components. The pump base and motor are located on the upper part of the wellhead (or pool), and the power of the motor is transmitted to the impeller shaft through the transmission shaft concentric with the lift pipe, which drives the impeller to generate flow and lift.

CDL is higher than human was finished for shipment in factory

Structural Description
1. Electric Fire Pump XBD series fire pumps are a kind of new type fire products researched and developed in full compliance with the state issued newly standard of GB6245-2006 “Fire pump”, according to the end-user’s practical needs and special using requirements. The inspection of the state fire equipment quality supervising center shows its all kinds of performance indexes are up to or over the standard’s requirements and it earned the certificate for fire state products.
2. Jockey Pump Pump motor, pump head, guide vanes, impeller, pressure tube, and out of the water segment, the shaft, mechanical seal components. Pump key parts guide vanes, impeller, pressure cylinders, shafts are made of stainless steel pump head, and out of the water segment: CDL, pump iron castings CDLF pump with stainless steel precision castings. Pump shaft seal, single mechanical seal friction pair to support the use of alloy steel carbide / graphite, the guide vanes. Pump and piping connection type for the circular flange connection, according to user need to use different connection methods.

Flow：50-7500 GPM
Head：3-20 Bar
The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing. The XA pump is capable of handling different fluid mediums and provides efficient flow control. Its operating principle utilizes centrifugal force to draw in and propel fluids through the pump. Overall, the XA single-stage centrifugal pump is a reliable and efficient solution for fluid pumping needs in industrial settings.

Horizontal fire pumps are designed according to the principle of centrifugal force. The high-speed rotating impeller blades drive the water to rotate and throw it out, so as to achieve the purpose of transportation. There are many kinds of centrifugal pumps, which can be divided into civil pumps and industrial pumps in use; from the perspective of conveying media, they can be divided into clean water pumps, impurity pumps, corrosion-resistant pumps, etc.

Flow：50-7500 GPM
Head：3-20 Bar
The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

Flow：50-5000 GPM
Head： 3-16 Bar
ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others.

Compared with domestic water pumps and production water pumps, fire pumps should have higher performance requirements. Most single-stage fire pumps provided by fire water sources require fire pumps to be pressurized to meet the water pressure and water volume requirements during fire fighting. The failure of the water pump due to improper setting and maintenance will inevitably affect fire fighting and rescue, causing unnecessary losses.

D-type horizontal, single-suction multi-stage, segmented centrifugal pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. For conveying clean water or other liquids with physical and chemical properties similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump flow parts, the sealing form and increasing the cooling system

The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing. The XA pump is capable of handling different fluid mediums and provides efficient flow control. Its operating principle utilizes centrifugal force to draw in and propel fluids through the pump. Overall, the XA single-stage centrifugal pump is a reliable and efficient solution for fluid pumping needs in industrial settings.

Flow：50-5000 GPM
Head：3-16 Bar (40-232 psi )
Power：11-1000 kw
Frequency：50 or 60 Hz
ISO end-suction pumps find wide application in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants, oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

An FDC is an external connection point that allows the fire department to supplement the water supply to the fire protection system using their hoses and equipment if needed.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others.