How to choose Integrated pump station?

Diesel engine fire pump Controller, use for diesel engine fire pump
①Voltage display: control the voltage in the cabinet.
②Current display: control the current in the cabinet.
③Power indication: control the power in the cabinet. (red)
④Diesel engine fault indication: diesel engine fault state indication. (red)
⑤ ” Emergency stop “: the button for emergency stop electric fire pump and diesel engine fire pump. (red)

Regular maintenance includes checking the foam concentrate levels, inspecting and testing the proportioning system, cleaning the components, and ensuring that all seals and connections are intact.

The equipment CONSISTS of frequency conversion control cabinet, no negative pressure device, automatic control system and remote monitoring system, water pump unit, voltage regulator compensator, negative pressure eliminator, pressure sensor, valve, instrument and piping system.

The fire control cabinet is mainly used to control the important executive device of the fire pump. The fire hydrant pump control cabinet and the fire sprinkler control cabinet are collectively called the fire control cabinet. When the fire hydrant pump (spray pump) control cabinet receives the fire hydrant signal, it will press Indicates to start or stop the fire water pump.

“Fire-fighting gas top-pressure water supply equipment is usually composed of basic components such as air-pressure water tanks, control cabinets, top-pressure gas storage systems, and decompression release devices; in the fire-fighting state, compressed gas is charged into the air-pressure water tank to replace the fire-fighting water storage in the tank. , and always maintain the rated working pressure of fire protection, and the fixed fire water supply equipment that supplies water to the fire pipe network.”

Fire pump fuel tanks should be inspected and maintained regularly according to relevant regulations and manufacturer recommendations. Typically, this includes periodic checks for leaks, corrosion, proper fuel levels, and the condition of associated components such as vents, gauges, and fuel lines.

The pump seal of the booster pump adopts a mechanical seal, which has the characteristics of reliable sealing and no leakage. It is usually used for water supply equipment for pressurizing the end of the fire network.
1. The diaphragm tank can be inflated for a long time and used for a long time, which can prevent water pollution.
Second, the equipment occupies a small area and saves investment, and it runs automatically.
Three, fault protection, fault automatic switching.

This device is effective for Class A (ordinary combustibles), Class B (flammable liquids), and certain Class D (combustible metals) fires, depending on the type of foam concentrate used.

Oil-water separator is a device, divided into catering oil-water separator and industrial oil-water separator. Catering oil and water separator is used to treat sewage in the catering industry; Because of the requirements of environmental protection, the sewage produced by the ship machinery space in rivers and lakes must be treated, and the industrial oil-water separator is needed.

The air conditioning pump system is an indispensable part of modern HVAC systems, regulating the temperature within a building by circulating hot or cold water, providing a comfortable indoor environment. This article delves into the product features of air conditioning pump systems, helping you understand their significance and how to optimize the heating, ventilation, and air conditioning efficiency of your building.

Foam tank systems typically include the foam tank itself, foam concentrate, foam proportioning equipment, pumps, piping, and discharge devices such as foam nozzles or monitors.

Yes, vertical turbine pumps can be constructed from materials such as stainless steel or high-strength alloys to withstand corrosive fluids or abrasive particles. Additionally, various coating and lining options are available to further protect pump components from corrosion or wear.

The high-efficiency non-clogging submerged sewage pump is a new generation of pump products successfully developed on the basis of the introduction of foreign advanced technology and combined with the use characteristics of domestic water pumps. Features. It has a unique effect in discharging solid particles and long-fiber waste.

The SXBWP Non-Negative Pressure Frequency-conversion Water Supply Equipment offers a comprehensive solution for addressing low water pressure challenges in various settings. Designed to cater to areas with inadequate municipal water pressure, as well as residential complexes, office buildings, hotels, schools, and industrial enterprises, this equipment ensures a stable secondary pressurized water supply. With features such as non-negative pressure generation, water and energy conservation, prevention of secondary pollution, and convenient installation, the SXBWP equipment delivers reliable water pressure enhancement while promoting efficient water usage and minimizing environmental impact.

It is a fire pump that is directly connected with a light engine and a water pump, and can be lifted and moved by manpower. It is used to fight general material fires and small oil fires. Because the hand pump is light and flexible, and is not restricted by traffic, electricity, and regional obstacles, it has been widely used in industrial and mining enterprises, warehouses, ports, docks and rural areas. The place where the fire started.

It can be seen from the working process of the surge tank that if there is no surge tank, because water is an incompressible fluid, a slight change in the amount of water will lead to changes in pressure accumulation. Therefore, whether it is a box-type variable frequency constant pressure water supply equipment or a non-negative pressure water supply equipment, the pressure stabilizer tank is essential.

The stainless steel submersible sewage pump adopts the design of large flow channel anti-clogging hydraulic components, which greatly improves the dirt passing capacity, and can effectively pass through 5 times the fibrous material of the pump diameter and solid particles with a diameter of about 50% of the pump diameter.

NL type sewage slurry pump is mainly used in rural areas to suck, convey and sprinkle river mud, manure, river water and slurry feed. , but also guaranteed for the simple flow of rural fire pumps.

Sewage pump is a kind of centrifugal impurity, there are two kinds of submersible and dry. It is mainly used for the treatment of industrial sewage and domestic sewage, and has played a great role in environmental protection. In addition, there are also cutting impellers in the sewage pump, which can play a good role in the treatment of various fibrous substances in the sewage.

The box-type integrated pump station is composed of stainless steel water tank, special water pump, intelligent frequency conversion control cabinet, non-negative pressure device, booster device, water diversion device and pressure stabilizer tank. The electromechanical integrated water supply equipment meets the requirements of the urban water supply pipe network, which does not generate negative pressure when pumping water, but also has a certain ability to adjust and store water, and the water is continuously cut off during peak periods.

◆The temperature of the medium should not exceed 60℃, the weight of the medium should be 1-1.3kg/dm3, and the PH value should be in the range of 5-9.
◆For pumps without internal gravity circulation cooling system, the exposed liquid level of the motor part should not exceed 1/2.
◆The material of the main parts of this pump is cast iron, so it cannot be used for pumping highly corrosive liquids. If the conveying medium is corrosive, please choose a stainless steel submersible pump. If you also need an explosion-proof submersible pump, you must choose a stainless steel explosion-proof submersible pump.

The non-negative pressure variable frequency water supply equipment takes the municipal pipe network as the water source, and makes full use of the original pressure of the municipal pipe network to form a closed continuous relay pressurized water supply mode, with good energy saving effect and no secondary pollution of water quality. Development and extension of water supply equipment.

The air conditioning pump system is an indispensable part of modern HVAC systems, regulating the temperature within a building by circulating hot or cold water, providing a comfortable indoor environment. This article delves into the product features of air conditioning pump systems, helping you understand their significance and how to optimize the heating, ventilation, and air conditioning efficiency of your building.

The fire pump is a stainless steel outdoor control cabinet with waterproof features. The fire pump control cabinet is mainly suitable for industrial production and various building water supply, drainage, fire protection, sprinkler pipe network pressurization and HVAC cold and hot water circulation and other occasions automatic control of fire pump

UL Fire Pump Motor IP23 meet UL1004-5 standard

Foam proportioning systems enhance the fire suppression capabilities of water, reduce the amount of water needed, minimize water damage, and can effectively smother fires by cutting off the oxygen supply.

The integrated prefabricated pumping station is the lifting equipment for lifting sewage, rainwater, drinking water and waste water.

End suction pumps usually have one impeller and a volute type casing. They work when the pumped liquid increases velocity as it moves along the vanes of the impeller; then the liquid moves into the volute casing, where a diffusion process converts the high velocity to high pressure.

The constant pressure variable frequency water supply equipment is an advanced system designed to maintain stable water pressure while ensuring energy-efficient water supply. It utilizes variable frequency technology and an intelligent control system to dynamically adjust pump speed and water pressure based on real-time water demand. This eliminates energy wastage caused by frequent start-stop cycles in traditional systems, providing users with a constant water pressure supply for stable and reliable water distribution during peak and off-peak periods. The equipment’s intelligent control system enables remote monitoring and automatic alarms, improving operational reliability and maintenance efficiency. Widely applied in industrial, construction, agricultural, and municipal sectors, this energy-efficient solution optimizes water supply systems to meet diverse user demands effectively.