Introduction to the scope of application and structural characteristics of horizontal fire pumps

self-priming type centrifugal oil pump
Model：40CYZ-A-20
flow：6m3/h
head：20m
with explosion proof motor 1.5kw

There are many structural types of self-priming pumps, among which molten salt pumps, vacuum pumps, submerged pumps, metering pumps, gear pumps, corrosion-resistant pumps, acid-resistant pumps, and fire pumps flow in the direction of rotation. Then it joins with the water from the right return water hole and flows along the volute. This repeated cycle gradually exhausts the air in the suction pipeline, so that the water enters the pump to complete the self-priming process. Sewage pump self-priming pump oil pump diaphragm pump screw pump gear oil pump pump is the same, the difference is that the return water does not flow to the outer edge of the impeller, but flows to the inlet of the impeller. When the internal mixing self-priming pump is started, the return valve at the front and bottom of the impeller must be opened, so that the liquid in the pump flows back to the inlet of the impeller. Here the air is expelled and the water is returned from the return valve to the impeller inlet. This is repeated until the air is exhausted, and the water is sucked into the internal-mixed self-priming pump. The working principle is the same as that of the external-mixed self-priming pump.

The vertical multistage fire pump is a top-tier technology designed to enhance the safety and efficiency of building fire protection systems. With advanced design and technology, this pump offers excellent corrosion resistance and durability, making it suitable for various environmental conditions. Its high-performance turbine blade design and efficient motor ensure powerful water pressure and flow, enabling rapid and effective water delivery. The intelligent monitoring system and fault alarm function enhance the pump’s reliability and availability.

The function of the surge tank fire pump in fire protection is to maintain the pressure of the system. When the pressure of the system decreases and reaches a certain value, the fire pump will automatically start to increase the pressure of the system. When the pressure reaches the specified value, the fire booster pump will stop, and the pressure of the system is maintained by the surge tank.

Flow：50-5000 GPM
Head：30-160 m 3-16 Bar 40-232 psi
ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others.

Regular maintenance includes:

Inspection: Regular checks for wear and tear on bearings, impellers, and seals.
Lubrication: Ensuring proper lubrication of bearings.
Cleaning: Removing any debris or buildup from the pump components.
Alignment Checks: Ensuring the pump remains properly aligned.

Regular maintenance should be performed weekly, monthly, and annually. Weekly inspections typically involve checking the pump house conditions, while monthly and annual checks include running the pump and testing its components.

Yes, electric fire pumps can be used in various types of buildings, including residential, commercial, industrial, and institutional structures. The key is to ensure the pump system is appropriately sized and configured to meet the specific fire protection requirements of the building.

The single-suction pump sucks in horizontally and axially, and spit out radially upwards. The pump is a suspension structure, and the rotor parts can be withdrawn for maintenance without disassembling the inlet and outlet pipelines during maintenance. The pump is connected with the motor through a common elastic coupling or an extended elastic coupling, and the shaft seal of the pump is sealed with a soft packing. The bearing is a single row radial ball bearing, lubricated with lubricating oil. From the motor side, the pump rotates clockwise.

The IS series single-stage centrifugal pump is a reliable and versatile solution for fluid transfer applications. Known for its simplicity and ease of use, this horizontal centrifugal pump is designed to efficiently transport clear water and fluids with similar properties. With a compact structure and convenient maintenance, the IS pump offers stable and low-noise operation, making it suitable for a wide range of industrial, agricultural, and municipal tasks. Whether it’s for industrial cooling systems, municipal water supply, agricultural irrigation, or firefighting applications, the IS single-stage centrifugal pump provides efficient and dependable liquid handling. Its durable construction and corrosion-resistant materials ensure long-lasting performance.

The OTS Double-Suction Split-case centrifugal Pump with High-Pressure Electric Motor is an exceptional firefighting equipment. This powerful combination delivers high flow rates and unmatched pumping efficiency, ensuring robust and continuous firefighting actions. Its compact design allows for quick deployment and rapid response, making it suitable for various settings. From rural wildfires to urban firefighting needs, this firefighting pump safeguards communities of all sizes, representing the pinnacle of safety and protection.

The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing. The XA pump is capable of handling different fluid mediums and provides efficient flow control. Its operating principle utilizes centrifugal force to draw in and propel fluids through the pump. Overall, the XA single-stage centrifugal pump is a reliable and efficient solution for fluid pumping needs in industrial settings.

WXZQ series fire-fighting stabilized pressure water supply equipment is based on GB27898.3-2011 fixed fire water supply equipment, Part 3: fire-fighting pressurized stabilized pressure water supply equipment. It fully absorbs the latest achievements and experience of air pressure water supply technology in recent years in terms of technology and selection methods of parts. It is a new type of ideal fire-fighting water supply equipment.

Yes, electric fire pumps can be integrated with various fire protection systems, including sprinkler systems, standpipes, fire hydrants, and foam systems. Integration ensures a comprehensive and effective fire protection solution for the building or facility.

The G Single Screw Pump is a versatile positive displacement pump designed for the transportation of high-viscosity liquids. Featuring inter-meshing screws within the pump body, it creates continuous sealed chambers for efficient fluid movement. This pump finds widespread application in industries such as chemical, petroleum, food, and pharmaceuticals, where it excels at conveying high-viscosity, high-temperature, abrasive, or corrosive liquids. Its advantages lie in high-precision conveying, excellent self-priming capabilities, wide applicability, corrosion resistance, and low noise operation. The G Single Screw Pump offers a reliable and efficient solution for industrial liquid transportation needs.

The biggest characteristic of deep well pump motor and pump into an organic whole, it is immersed in the underground Wells to a kind of pump and water pump, is widely used in farmland irrigation and drainage, industrial and mining enterprises, urban water supply and drainage and sewage treatment, etc. Because the motor into the water at the same time, the reason for the structure of the motor requirements than the general motor special. The structure of the motor can be divided into dry type, half dry type, oil filled type, wet 4 kinds

ISO series centrifugal pump is a single-stage single-suction centrifugal pump developed by China Better Technology Co., Ltd. with reference to international similar products using modern fluid mechanics to meet the international standard ISO9908 secondary energy efficiency standard.

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105C¡£
Series OTS pumps are available for capacities Of 69-000m3/hr and heads of 70-200m.They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc. ?

The vertical turbine pump is a vertical pump composed of single or multiple centrifugal or mixed-flow impellers, guide casing, riser pipe, transmission shaft, pump base, motor and other components. The pump base and the motor are located on the upper part of the wellhead (or pool), and the power of the motor is transmitted to the impeller shaft through the transmission shaft concentric with the water pipe, driving the impeller to generate flow and lift.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

There are many classification methods for fire pumps, which can be divided into sprinkler pumps, fire hydrant pumps, stabilized pumps, etc. according to their uses.
The function of the fire pump is relatively powerful. There are many models and a wide range of functions. Its selection is a problem that many users need to take seriously. Choosing a suitable model is not only easy to use, but also convenient for later maintenance.

Flow:13-1300 GPM
Pressure:2-20 BAR (30-290 PSI)
Jockey pumps are essential devices used to maintain stable pressure within systems, commonly applied in fire protection, water supply, and industrial processes. They automatically adjust pressure as demand changes, ensuring efficient system operation.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces. They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.

Model: D25-30X5,
Parameter: 25m3/h@210m,
Motor power: 37kw,
Speed: 3500rpm,

Application of single stage end suction pump
Single-stage end-suction centrifugal pumps are used in industrial applications for water supply, pressurization and liquid transfer, ventilation, air conditioning and heating, and agricultural/irrigation applications.

The mud pump is mainly used to transport the mud medium with high consistency or more particles and debris. It is often used in construction sites, enterprise production, and mud pond pumping.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105C。
Series OTS pumps are available for capacities Of 68-18000m3/hr and heads of 70-200m.They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

Yes, but the materials used for construction may vary. For saltwater applications, pumps are often made with corrosion-resistant materials such as stainless steel or special coatings to prevent corrosion and ensure longevity.

Middle open pump (middle open cycle), also known as single-stage double suction centrifugal pump, is mainly characterized by large flow of conveying medium.

Operating principle of the split pump: the impeller is installed in the pump shell and fastened on the pump shaft, which is directly driven by the motor. The center of the pump housing is connected with a liquid suction pipe. The liquid enters the pump through the bottom valve and the suction pipe. The liquid discharge port on the pump casing is connected with the discharge pipe. When the speed of the pump is constant, its head and flow are related to the impeller diameter.