ISW horizontal centrifugal pump

LW series vertical non-clogging sewage pump is a pump product successfully developed based on the characteristics of domestic water pumps. It has the characteristics of excellent energy saving effect, anti-winding, non-clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long-fiber waste. Compared with the traditional impeller, the impeller adopts the form of single flow channel or double flow channel. It is similar to a curved pipe with the same cross-section and has very good flow capacity. With a reasonable volute chamber, the pump has high efficiency, The impeller is tested by dynamic and static balance, and the sewage pump is automatically stirred so that the pump has no vibration during operation.

ISWR horizontal single-stage single-suction hot-water pump is to be used in metallurgy, chemical industry, textile, timber-processing, paper making, pressure circulating conveyance of boiler hot water in hotels, bathrooms or restaurants, and circulated heating pumps in city houses. Its operation temperature is below 99C.

NL type sewage slurry pump is mainly used in rural areas to suck, convey and sprinkle river mud, manure, river water and slurry feed. , but also guaranteed for the simple flow of rural fire pumps.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water lift pipe, etc. The specific fire pump model is determined according to the environment and performance requirements, and at the same time According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

This device is suitable for fighting Class A (ordinary combustibles like wood, paper, and textiles), Class B (flammable liquids such as gasoline, oils, and alcohols), and some Class D (combustible metals like magnesium and titanium) fires, depending on the foam concentrate type used.

The hand-carried fire pump has the advantages of small footprint, convenient maintenance, and easy portability. It is more advantageous in areas where fire-fighting vehicles cannot pass. The hand-carried fire pump is ideal for drainage, drought resistance, greening, water supply and emergency disaster rescue. equipment.

The equipment from Better Technology Group is debugging now

The electrical control cabinet of the fire pump set has the switching control mode of single pump, multiple pumps, and multiple main and standby pumps. According to the power of the pump and user requirements, the starting mode of the pump motor can be configured as direct start, star-delta start and other forms.

End suction centrifugal water pump is an energy-saving pump designed by teamwork in the whole nation, it is improved on a basis on model BA, B and other single-stage water centrifugal pump.

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly vertical centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps. In addition, according to different operation temperatures and mediums, we developed the hot-water pump (IRG), corrosion-resistant chemical pump (IHG) and oil pump (YG). This pump enjoys excellent performance, good reliability, long operation life, reasonable construction and nice appearance, which is outstanding in the industry.

ISG vertical single-stage single-suction centrifugal pump, can transport water and physical and chemical properties of similar Yu Qingshui other liquid and is applicable to industrial and urban water supply and drainage, pressurized water supply in high-rise building, garden sprinkler irrigation, fire pressurization, long-distance transmission, hvac refrigeration cycle, cold and hot water circulation pressurization in the bathroom, etc, and form a complete set of equipment, using temperature T < 80 ℃.

Diesel engine fire pump Controller, use for diesel engine fire pump
①Voltage display: control the voltage in the cabinet.
②Current display: control the current in the cabinet.
③Power indication: control the power in the cabinet. (red)
④Diesel engine fault indication: diesel engine fault state indication. (red)
⑤ ” Emergency stop “: the button for emergency stop electric fire pump and diesel engine fire pump. (red)

Applitions:
Water works: Water intake/Water supply/Booster
Industrial use: Water intake/Water supply/Booster/Circulation/
Drainage/Chemical/Re-finery/Firefighting/Sea water desalination
Agricultural use: Irrigation and Drainage

The most advanced externally mounted PTFE bellows mechanical seal is adopted, which has multi-layer protection and prolongs the service life of the mechanical seal. When conveying the medium containing impurity particles, it can be equipped with single-end hard-to-hard (silicon carbide to silicon carbide) without cooling water. ) mechanical seal, so users need to consider the solid content in the medium when selecting models.

The equipment through the back curved impeller will be liquid forward at the same time, the sludge in the oxidation tank to fully stir and mix, to improve the oxidation tank and other sewage treatment facilities water flow conditions, so that different water to obtain the sewage treatment process required by the flow rate, in order to prevent sludge settlement, improve the efficiency of sewage treatment.

When a partial failure of the equipment occurs, the emergency function can be enabled to continue the water supply. The equipment can be automatically connected to the municipal water supply network, and has dual constant pressure functions, which can meet the normal pressure and flow of domestic and production water, and can automatically switch to high-pressure and large-flow water supply when a fire occurs, and can be used for multiple purposes.

Use sanitary cleaning, high efficiency, low noise, mild corrosion resistance and compact structure, beautiful appearance, small size, light weight, convenient maintenance, reliable sealing performance

End suction pumps usually have one impeller and a volute type casing. They work when the pumped liquid increases velocity as it moves along the vanes of the impeller; then the liquid moves into the volute casing, where a diffusion process converts the high velocity to high pressure.

XZQ type intelligent automatic complete set of water supply equipment can be used for the old water supply and drainage pressure system reform, can cancel the water tower, high water tank and pressure tank. Industry needs constant pressure water supply system, oil field constant pressure oil transmission system.

Foam proportioning systems enhance the fire suppression capabilities of water, reduce the amount of water needed, minimize water damage, and can effectively smother fires by cutting off the oxygen supply.

The air conditioning pump system is an indispensable part of modern HVAC systems, regulating the temperature within a building by circulating hot or cold water, providing a comfortable indoor environment. This article delves into the product features of air conditioning pump systems, helping you understand their significance and how to optimize the heating, ventilation, and air conditioning efficiency of your building.

The box-type non-negative pressure water supply equipment can be directly linked to the water supply network to ensure that the water supply network does not generate negative pressure. The pressurized water in the closed tank at peak time can compensate for the shortage of water supply in the water supply network and meet the needs of users.

The equipment CONSISTS of frequency conversion control cabinet, no negative pressure device, automatic control system and remote monitoring system, water pump unit, voltage regulator compensator, negative pressure eliminator, pressure sensor, valve, instrument and piping system.

Vertical inline close coupled fire pumps are specifically designed for vertical mounting. The suction and discharge nozzles are located on the same centerline 180° apart. Vertical pumps significantly reduce required mounting space. They are easy to maintain.

A Pressure Type Foam Proportioning Mixing Device is a sophisticated system used in fire suppression to mix foam concentrate with water, creating an effective foam solution for combating fires. This device ensures a precise and consistent mixing ratio, enhancing the fire-extinguishing capabilities of the foam.

Maintenance requirements for vertical turbine pumps typically include periodic inspection and lubrication of bearings, checking and adjusting impeller clearances, monitoring motor performance, and ensuring proper alignment of the pump and motor.

PW pumps are single-stage single-suction cantilever centrifugal pump for pumping dirty liquid (liquid containing fibers and other suspended objects or stool), liquid temperature does not exceed 100 ℃ , suitable for urban, rural, industrial and mining sectors excluded sewage purposes

Oil-water separation device is a device that separates oil and water. The oil-water separation device is one of the important environmental protection facilities in the sewage treatment plant. Its function is to improve the biodegradability of sewage and reduce the energy consumption and treatment cost of sewage treatment.

Significant energy saving, small footprint, easy installation and stable performance.
The jacket is made of 304 high-quality stainless steel, and the shaft seal is made of wear-resistant mechanical seal, which has no leakage and long service life.
The axial force is solved by hydraulic balance, so the operation is stable and the noise is low.

The QXB submersible centrifugal aerator adopts the direct drive of the motor and the impeller, and uses the centrifugal force generated by the rotation of the impeller to displace the surrounding water to form a low-pressure area to inhale the water flow. At the same time, a vacuum is created at the inlet of the impeller to inhale air. The water is fully mixed to form a uniform gas-water mixture, which is quickly discharged under the action of centrifugal force.
Due to the extremely strong water jet, the effective water circulation is caused, and the air is sheared into a large number of tiny air bubbles. The surface area is greatly improved, and because the bubbles rise slowly, a large amount of oxygen in the air is dissolved in the water, which makes the power efficiency of the machine better than other types of aerators.