ISWB Oil Pump

Diesel engine fire pump Controller, use for diesel engine fire pump
①Voltage display: control the voltage in the cabinet.
②Current display: control the current in the cabinet.
③Power indication: control the power in the cabinet. (red)
④Diesel engine fault indication: diesel engine fault state indication. (red)
⑤ ” Emergency stop “: the button for emergency stop electric fire pump and diesel engine fire pump. (red)

Municipal – flood control and irrigation, drought relief, manhole drainage, sewage sludge drainage, emergency repair drainage, no power supply and drainage.

Military – field water supply system, island freshwater collection system.

Agriculture – irrigation and drainage systems, cofferdam pumping, alternative stormwater pumping stations, temporary water transfer, areas without fixed pumping stations and without electricity.

The pump seal of the booster pump adopts a mechanical seal, which has the characteristics of reliable sealing and no leakage. It is usually used for water supply equipment for pressurizing the end of the fire network.
1. The diaphragm tank can be inflated for a long time and used for a long time, which can prevent water pollution.
Second, the equipment occupies a small area and saves investment, and it runs automatically.
Three, fault protection, fault automatic switching.

The QXB submersible centrifugal aerator adopts the direct drive of the motor and the impeller, and uses the centrifugal force generated by the rotation of the impeller to displace the surrounding water to form a low-pressure area to inhale the water flow. At the same time, a vacuum is created at the inlet of the impeller to inhale air. The water is fully mixed to form a uniform gas-water mixture, which is quickly discharged under the action of centrifugal force.
Due to the extremely strong water jet, the effective water circulation is caused, and the air is sheared into a large number of tiny air bubbles. The surface area is greatly improved, and because the bubbles rise slowly, a large amount of oxygen in the air is dissolved in the water, which makes the power efficiency of the machine better than other types of aerators.

The Fire Pressure Stabilization Equipment, coupled with the CDL Vertical Multistage Fire Pump, offers a comprehensive solution to elevate fire safety measures. This powerful combination ensures a consistent water pressure for effective fire suppression. By incorporating pressure stabilization technology, this system guarantees an uninterrupted fire water supply, efficient water distribution, and reliable operation of fire hydrants and sprinkler systems. With advanced infrastructure and the ability to maximize firefighting capabilities, this configuration significantly enhances overall fire safety standards. Investing in fire pressure stabilization equipment is a proactive step towards ensuring superior fire protection and providing peace of mind in critical situations.

Regular maintenance of foam tanks is essential to ensure their proper functioning during emergencies. This includes inspecting for leaks, checking foam concentrate levels, testing proportioning equipment, and conducting periodic foam quality tests.

WQ(QW) series products in the rated voltage is
380 V or thter , power frequency for 50 Hz/60HZ when used
2、 the temperature of the medium no more than
40℃, medium density≤1150kg/m3, PH valuein 5～9
range.
3、 the altitude does not exceed 1000 meters
4、 transport medium viscosity not super 1000 CP
5、 products work operation must be completely submerged, but shall not be more than 10 m diving depth

When a partial failure of the equipment occurs, the emergency function can be enabled to continue the water supply. The equipment can be automatically connected to the municipal water supply network, and has dual constant pressure functions, which can meet the normal pressure and flow of domestic and production water, and can automatically switch to high-pressure and large-flow water supply when a fire occurs, and can be used for multiple purposes.

Fire pumps are a type of pump used in fire fighting. Compared to ordinary pumps, fire pumps have higher standards and requirements in terms of sealing, corrosion resistance and operational efficiency. Before running the fire pump equipment, we need to discharge the gas inside the pump, do you know what is the significance of doing so? The following is the answer from Shanghai Xizhiquan.

1. If there is gas inside the fire pump, then the equipment cannot form a sufficient vacuum during operation, resulting in the liquid not being able to be sucked up. This phenomenon is called gas binding, and is a phenomenon that often results from many operators not understanding this operation.
2, understand the formation of gas binding causes, we will understand how to avoid this problem occurs. Before the fire pump equipment is started, the pump casing needs to be filled with liquid. In the pump suction pipe mouth need to be equipped with a non-return valve, can effectively avoid the pump in the liquid due to gravity into the low tank, if the pump position is low, there is no need to carry out filling the pump.
3. The compressed gas inside the fire pump will occupy a certain space in the fire pump, making it impossible to seal it.

Therefore, the operation of deflating the fire pump before putting it into use can increase the vacuum of the equipment and increase the pumping capacity of the pump, thus effectively improving the efficiency of the equipment and reducing the waste of resources.

used for pumping normal temperature water and warm water under 100°C from wells, river, lake , sea. Type JCW are better used for city, factory dirty water and water containing great sand in river and sea, widely used in factories and mines, city and countries, petrolatum filed, plant and irrigation on farmland.

YCB series multistage centrifugal oil pump is used mainly for petroleum refining, petrochemical and chemical industries to transport the petroleum-containing no solid grains, liquefied petroleum gas, other petroleum products, high-temperature high pressure, combustible and explosive liquids.This horizontal oil pump is an electric pump with explosion-proof device, which can be customized.

End suction pumps usually have one impeller and a volute type casing. They work when the pumped liquid increases velocity as it moves along the vanes of the impeller; then the liquid moves into the volute casing, where a diffusion process converts the high velocity to high pressure.

The equipment CONSISTS of frequency conversion control cabinet, no negative pressure device, automatic control system and remote monitoring system, water pump unit, voltage regulator compensator, negative pressure eliminator, pressure sensor, valve, instrument and piping system.

Electric fire pump controllers are designed to start an electric motor driven fire pump.Diesel engine fire pump contollers are designed to automatically start a diesel engine driven fire pump upon detection of a pressure drop in the fire protection system.

It is a fire pump that is directly connected with a light engine and a water pump, and can be lifted and moved by manpower. It is used to fight general material fires and small oil fires. Because the hand pump is light and flexible, and is not restricted by traffic, electricity, and regional obstacles, it has been widely used in industrial and mining enterprises, warehouses, ports, docks and rural areas. The place where the fire started.

PW pumps are single-stage single-suction cantilever centrifugal pump for pumping dirty liquid (liquid containing fibers and other suspended objects or stool), liquid temperature does not exceed 100 ℃ , suitable for urban, rural, industrial and mining sectors excluded sewage purposes

The box-type integrated pump station is composed of stainless steel water tank, special water pump, intelligent frequency conversion control cabinet, non-negative pressure device, booster device, water diversion device and pressure stabilizer tank. The electromechanical integrated water supply equipment meets the requirements of the urban water supply pipe network, which does not generate negative pressure when pumping water, but also has a certain ability to adjust and store water, and the water is continuously cut off during peak periods.

Petrochemical process pumps are suitable for conveying clean or liquids containing a small amount of particles, low temperature or high temperature liquids, neutral or corrosive liquids. Suitable for oil refining, petrochemical, coal processing and cryogenic engineering, papermaking, metallurgy, medicine, synthetic fiber, power generation, environmental protection, etc.

Regular maintenance includes checking the foam concentrate levels, inspecting and testing the proportioning system, cleaning the components, and ensuring that all seals and connections are intact.

Reliable because of professionalism, specializing in the production of industrial fire pumps for 20 years, to provide you with the best quality and most intimate service.
if you are interested in our pumps, welcome to contact us!

The equipment through the back curved impeller will be liquid forward at the same time, the sludge in the oxidation tank to fully stir and mix, to improve the oxidation tank and other sewage treatment facilities water flow conditions, so that different water to obtain the sewage treatment process required by the flow rate, in order to prevent sludge settlement, improve the efficiency of sewage treatment.

The submersible sewage pump has features such as easy installation and maintenance, high working efficiency, anti-clogging and anti-winding design, which make it an ideal choice for industrial, municipal or commercial waste discharge system, septic tank, piggery, farmland irrigation.

1.Enterprise unit waste water discharge.
2.Urban sewage treatment plant discharge system.
3.Hospital, hotel, high-rise building sewage discharge.

Volume:500-2000L

Capacity:50-1000L
Type:
Single-Wall Fuel Tank
Double-Wall Fuel Tank

The ZWX box-type non-negative pressure water supply equipment is a pressurized water system designed to address inadequate municipal water pressure in critical settings such as hospitals and hotels, where water cannot be shut off. It also serves as an ideal solution for meeting the domestic water needs of high-rise buildings and, specifically, fulfilling the water requirements of schools. This equipment ensures a continuous water supply, even during maintenance or emergency situations, effectively resolving the challenges posed by low water pressure. With its efficient pressurized water supply and advanced control technology, the ZWX equipment offers stable water pressure and flow rates, catering to the diverse demands of different settings.

Fire booster pump is used to maintain system pressure without starting the main pump. These pumps are not designed to keep up with full system demand, their only function is system pressure maintenance.

ZX self priming pump diesel engine driven works for water or medium similar to water that viscosity below 5°E and temperature below 80°C(176°F). It is compact, easy to operate, running stable, easy to maintain, efficient, with long service life and large suction capacity.

XA bare pump with below Models for packing
XA100/26
XA80/26
XA65/32
XA50/32