JPWQ automatic Stirring submersible Sewage Pump (stainless steel)

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water lift pipe, etc. The specific fire pump model is determined according to the environment and performance requirements, and at the same time According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

This device is effective for Class A (ordinary combustibles), Class B (flammable liquids), and certain Class D (combustible metals) fires, depending on the type of foam concentrate used.

Fire-fighting booster and pressure stabilisation water supply sets are supporting equipment for fire-fighting projects, the main role: to maintain the fire-fighting pressure of the water fire-fighting network, fire alarm open water fire-fighting equipment can immediately spray a full water column, to the alarm linkage to start the big fire pump to win more than 30 seconds of initial fire-fighting time, until the main fire pump full load start to carry out, because the equipment can always maintain the pressure of the pipe network, so that the pipe network does not store air Start the big fire pump without choking the pipe network without the danger of chattering. And get the fire product 3CF certificate.

The Fire Pressure Stabilization Equipment, coupled with the CDL Vertical Multistage Fire Pump, offers a comprehensive solution to elevate fire safety measures. This powerful combination ensures a consistent water pressure for effective fire suppression. By incorporating pressure stabilization technology, this system guarantees an uninterrupted fire water supply, efficient water distribution, and reliable operation of fire hydrants and sprinkler systems. With advanced infrastructure and the ability to maximize firefighting capabilities, this configuration significantly enhances overall fire safety standards. Investing in fire pressure stabilization equipment is a proactive step towards ensuring superior fire protection and providing peace of mind in critical situations.

The variable frequency air pressure water supply equipment is a kind of water supply equipment. It uses the pressure change of the compressed air in the closed tank to adjust and pressurize the water supply. It mainly plays the role of boosting and water volume adjustment in the water supply system. Frequency conversion air pressure water supply equipment. It is a common pressurized and stabilized equipment, including air pressure water tanks, jockey pumps and some accessories.

Significant energy saving, small footprint, easy installation and stable performance.
The jacket is made of 304 high-quality stainless steel, and the shaft seal is made of wear-resistant mechanical seal, which has no leakage and long service life.
The axial force is solved by hydraulic balance, so the operation is stable and the noise is low.

Air conditioning pump is a pump designed for sewage discharge. Air conditioning pump is suitable for heavy, polluted condensate drainage needs, can be used for high temperature and weak acid condensate removal (temperature -46~95℃), can be used in air conditioning system and refrigeration equipment.

The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. The long shaft pump provides flexibility through customization options and multiple driving choices. It is a reliable solution for water supply, sewage treatment, and chemical processes.

1.Enterprise unit waste water discharge.
2.Urban sewage treatment plant discharge system.
3.Hospital, hotel, high-rise building sewage discharge.

The horizontal mixed-flow pump is a kind of shell type single suction pump with one impeller. The reasonable structure makes for reliable operation, convenient maintenance, high efficiency, small volume and light weight.

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

This type of pump truck is mainly suitable for urban areas, tunnel rescue and various complex working conditions. The effects of stability and shock absorption are also two of its major points. It is mainly used for flood control and drought relief, emergency drainage, etc.

Capacity:50-1000L
Type:
Single-Wall Fuel Tank
Double-Wall Fuel Tank

Fire pumps are a type of pump used in fire fighting. Compared to ordinary pumps, fire pumps have higher standards and requirements in terms of sealing, corrosion resistance and operational efficiency. Before running the fire pump equipment, we need to discharge the gas inside the pump, do you know what is the significance of doing so? The following is the answer from Shanghai Xizhiquan.

1. If there is gas inside the fire pump, then the equipment cannot form a sufficient vacuum during operation, resulting in the liquid not being able to be sucked up. This phenomenon is called gas binding, and is a phenomenon that often results from many operators not understanding this operation.
2, understand the formation of gas binding causes, we will understand how to avoid this problem occurs. Before the fire pump equipment is started, the pump casing needs to be filled with liquid. In the pump suction pipe mouth need to be equipped with a non-return valve, can effectively avoid the pump in the liquid due to gravity into the low tank, if the pump position is low, there is no need to carry out filling the pump.
3. The compressed gas inside the fire pump will occupy a certain space in the fire pump, making it impossible to seal it.

Therefore, the operation of deflating the fire pump before putting it into use can increase the vacuum of the equipment and increase the pumping capacity of the pump, thus effectively improving the efficiency of the equipment and reducing the waste of resources.

When a partial failure of the equipment occurs, the emergency function can be enabled to continue the water supply. The equipment can be automatically connected to the municipal water supply network, and has dual constant pressure functions, which can meet the normal pressure and flow of domestic and production water, and can automatically switch to high-pressure and large-flow water supply when a fire occurs, and can be used for multiple purposes.

The hand-carried fire pump has the advantages of small footprint, convenient maintenance, and easy portability. It is more advantageous in areas where fire-fighting vehicles cannot pass. The hand-carried fire pump is ideal for drainage, drought resistance, greening, water supply and emergency disaster rescue. equipment.

Hygienic and clean to use, high efficiency, low noise, mild corrosion resistance and compact structure, beautiful appearance, small size, light weight, convenient use and maintenance, reliable sealing performance

The QXB submersible centrifugal aerator adopts the direct drive of the motor and the impeller, and uses the centrifugal force generated by the rotation of the impeller to displace the surrounding water to form a low-pressure area to inhale the water flow. At the same time, a vacuum is created at the inlet of the impeller to inhale air. The water is fully mixed to form a uniform gas-water mixture, which is quickly discharged under the action of centrifugal force.
Due to the extremely strong water jet, the effective water circulation is caused, and the air is sheared into a large number of tiny air bubbles. The surface area is greatly improved, and because the bubbles rise slowly, a large amount of oxygen in the air is dissolved in the water, which makes the power efficiency of the machine better than other types of aerators.

The fire control cabinet is a control cabinet that controls the operation of the fire pump. The fire control cabinet is a collection of many electrical components. These electronic components have different functions. They cooperate with each other to effectively control the operation of the fire pump. In addition to the function of controlling the operation of the fire pump, the fire control cabinet also has functions such as overload protection, overvoltage protection, overcurrent protection, phase loss protection, short circuit protection, and overheat protection that a single fire pump cannot possess.

The pump shell has two types of axial and radial sections. The shell of most single stage pump is volute type, the radial division shell of multistage pump is generally annular shell or circular shell.

Self priming pump with diesel engine driven is compact, easy to operate, running stable, easy to maintain, efficient, with long service life and large suction capacity.

1. The pump is a vertical structure, the inlet and outlet diameters are the same, and they are located on the same center line. It can be installed in the pipeline like a valve. The appearance is compact and beautiful, the floor space is small, and the construction investment is low. Can be used outdoors.
2. The impeller is directly installed on the elongated shaft of the motor, the axial dimension is short, the structure is compact, and the pump and motor bearings are reasonably arranged, which can effectively balance the radial and axial loads generated by the operation of the pump, thereby ensuring the smooth operation of the pump. Low vibration and low noise.
3. The shaft seal adopts mechanical seal or mechanical seal combination, adopts imported titanium alloy sealing ring, medium-sized high temperature resistant mechanical seal and hard alloy material, wear-resistant seal, which can effectively prolong the service life of mechanical seal.
4. Easy installation and maintenance, no need to dismantle the pipeline system, just remove the pump joint seat nut to extract all the rotor parts.
5. The series and parallel operation modes of pumps can be adopted according to the requirements of use, that is, the needs of flow and head.
6. The vertical and horizontal installation of the pump can be adopted according to the requirements of the pipeline arrangement.

IRG series vertical hot water pump are designed according to the unique structure of pipe centrifugal pump.These series pump adopt the advanced fluid model optimized by pump experts. So the pumps have high efficiency and reliability. Some units and components have exported to internal markets and gained good comments from both domestic and oversea clients.

Fire booster pump is used to maintain system pressure without starting the main pump. These pumps are not designed to keep up with full system demand, their only function is system pressure maintenance.

Electric fire pump controllers are designed to start an electric motor driven fire pump.Diesel engine fire pump contollers are designed to automatically start a diesel engine driven fire pump upon detection of a pressure drop in the fire protection system.

Air conditioning pump systems are typically more energy-efficient than traditional air conditioning systems, especially in moderate climates. They can provide both cooling and heating, making them versatile for year-round use. They also offer zoning capabilities, allowing different areas of a building to be cooled or heated independently.

1. Compact structure, small size, small footprint
2. Easy maintenance, stable and reliable operation, less leakage, the shaft seal is a mechanical seal
3. Motor plus rain cover
4. High efficiency, long service life and light weight

Integrated Prefabricated Pump Station

The pump station is supplied as an integrated unit. It includes a pump station cylinder, pressure pipeline, maintenance platform, maintenance ladder, grill filter, coupling system, pump lifting system, ventilation, anti-skid manhole cover, lighting system, etc.

According to CFO fluid dynamics finite element analysis, the base structure is optimized to prevent sludge deposition in sewage treatment and no odor residue.

All internal installation and commissioning work is completed in the factory. The pump station is only installed on the site, which greatly reduces the civil construction period and engineering cost, and reduces the overall investment of the owner.

The pumping station cylinder is made of FRP, and the internal fittings are made of anti-corrosion materials such as SUS304 and hot-dip galvanizing. No maintenance is required, and the normal service life can reach more than seven years.

Intelligent operating system, easy to understand, to run, monitoring without personnel supervision

Welcome your inquiry!

The star connection-delta connection utilizes the two connection methods of the motor to achieve the purpose of step-down starting, reduce the starting current, and reduce the impact of excessive current on the power grid. Simply put, the stator is connected in star at the start of the motor and then switched to delta connection after starting, which is the starting method of star-delta buck start.

It is a fire pump that is directly connected with a light engine and a water pump, and can be lifted and moved by manpower. It is used to fight general material fires and small oil fires. Because the hand pump is light and flexible, and is not restricted by traffic, electricity, and regional obstacles, it has been widely used in industrial and mining enterprises, warehouses, ports, docks and rural areas. The place where the fire started.