Mastering Fluid Movement: Unveiling the Power of Long Shaft Pumps

Horizontal fire pumps have a wide range of applications and are suitable for the supply and extraction of various fire water sources, including tap water, reservoirs, reservoirs, etc. In terms of building fire protection, horizontal fire pumps can be used in fire extinguishing water systems, sprinkler water systems and foam fire extinguishing systems. In terms of industrial fire protection, horizontal fire pumps can be used in railway stations, ports, chemical plants and other places. In addition, horizontal fire pumps can also be used for rural fire protection, such as fire protection propaganda, drought resistance irrigation, flood control and disaster relief, etc.

The XBD-W horizontal single-stage fire pump is a reliable and efficient fire protection solution. Designed with advanced technology, this pump offers powerful drainage capabilities and dependable performance, providing outstanding fire protection for buildings and industrial facilities. This article highlights the features and advantages of the XBD-W horizontal single-stage fire pump, explaining why it is the ideal choice for your fire suppression system.

Before start:

Turning the clutch by hand, there should be no jammedphenomenon at the turner position.
Opening the inlet valve and the vent valve, letting the waterfill into the pump’s chamber, then closing the vent valve.
Clicking the switch of motor, and confirming whether theturning is right or not.

Running:

Fully opening the inlet valves, and closing the valves of theoutlet pipe.
Connecting the power, Opening the valves of the outlet pipeand adjusting the needed working point when the turning velocityis normal.
Watching whether there exist abnormities or not, if yes,should the pump be stopped and inspected before re-running.

Stop:

After turning off the outlet valves one by one, shutting offthe power.
Shutting off the inlet valves.
If the ambient temperature is below 0 , some warm-℃keeping measures should be adopted.

XA series single-stage centrifugal pump is the earliest single-stage single-suction centrifugal pump product launched by Better (China)Technology Co,, Ltd. This product combines the advantages of sinnilar products in China and abroad, and is designed with excellent hydraulic model. Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operation cost of pumps in various applications.

The lifespan of a fire pump depends on factors like maintenance, usage, and environmental conditions. With proper maintenance, fire pumps can last for several decades.

·UL Standard:
Flow:50-500GPM
Head:6-16 Bar（90-230PSI）
·Non-UL Standard:
Flow：50-5000 GPM
Head：3-16 Bar（40-232 psi）

The OTS Double-suction Split-case centrifugal pump is a widely used centrifugal pump in industrial and water supply systems. It features a double-suction design with two suction inlets on either side of the pump. This pump offers high efficiency, stability, and reliability due to its rational design and advanced fluid dynamics principles. It can handle large flow rates and high heads, making it suitable for various applications. The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.

Electric fire pumps are mainly used for pressurized water supply for fire protection systems, and can also be used for drainage of factories and mines. Mainly used in industrial and mining enterprises, engineering construction, high-rise buildings and residential area fire hydrant water supply system, automatic sprinkler fire extinguishing water supply system.

Flow：50-5000 GPM
Head：3-16 Bar (40-232 psi )
Power：11-1000 kw
Frequency：50 or 60 Hz
ISO end-suction pumps find wide application in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants, oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-400 mm
Frequency：50 or 60 Hz

Flow：50-7500 GPM
Head：3-20 Bar
The Vertical Turbine Fire Pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

The XBD-DL vertical multistage fire pump is a top-tier technology designed to enhance the safety and efficiency of building fire protection systems. With advanced design and technology, this pump offers excellent corrosion resistance and durability, making it suitable for various environmental conditions. Its high-performance turbine blade design and efficient motor ensure powerful water pressure and flow, enabling rapid and effective water delivery. The intelligent monitoring system and fault alarm function enhance the pump’s reliability and availability. By choosing the XBD-DL vertical multistage fire pump, you gain an innovative and efficient solution to enhance the safety and efficiency of your fire protection system.

Horizontal fire pumps have significant advantages such as high efficiency, low operating noise, good anti-cavitation performance, reasonable structure, and long service life. , Long-distance water delivery, heating, bathroom, boiler cold and warm water cycle pressurization, air conditioning and refrigeration system water delivery and equipment matching and other occasions.

Flow：500 GPM
Head：9 bar
ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.

The single-suction pump sucks in horizontally and axially, and spit out radially upwards. The pump is a suspension structure, and the rotor parts can be withdrawn for maintenance without disassembling the inlet and outlet pipelines during maintenance. The pump is connected with the motor through a common elastic coupling or an extended elastic coupling, and the shaft seal of the pump is sealed with a soft packing. The bearing is a single row radial ball bearing, lubricated with lubricating oil. From the motor side, the pump rotates clockwise.

Structural Description
1. Electric Fire Pump XBD series fire pumps are a kind of new type fire products researched and developed in full compliance with the state issued newly standard of GB6245-2006 “Fire pump”, according to the end-user’s practical needs and special using requirements. The inspection of the state fire equipment quality supervising center shows its all kinds of performance indexes are up to or over the standard’s requirements and it earned the certificate for fire state products.
2. Jockey Pump Pump motor, pump head, guide vanes, impeller, pressure tube, and out of the water segment, the shaft, mechanical seal components. Pump key parts guide vanes, impeller, pressure cylinders, shafts are made of stainless steel pump head, and out of the water segment: CDL, pump iron castings CDLF pump with stainless steel precision castings. Pump shaft seal, single mechanical seal friction pair to support the use of alloy steel carbide / graphite, the guide vanes. Pump and piping connection type for the circular flange connection, according to user need to use different connection methods.

-UL Standard:
Flow：100-3000 GPM   
Head： 90-250 PSI 
– NON-UL Standard:
 Flow：100-10000GPM   
Head： 40-250 PSI 

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

Horizontal fire pumps have significant advantages such as high efficiency, low operating noise, good anti-cavitation performance, reasonable structure, and long service life. , Long-distance water delivery, heating, bathroom, boiler cold and warm water cycle pressurization, air conditioning and refrigeration system water delivery and equipment matching and other occasions.

Horizontal fire pump is a common fire-fighting equipment, which is used to supply water source and pump water source, and plays an important role in the fire-fighting process. Compared with vertical fire pumps, horizontal fire pumps are more stable and have higher efficiency. In this article, we will analyze the structural characteristics and scope of use of horizontal fire pumps.

XA80/32 and XA100/32 bare shaft pump for shipment

ISW series horizontal single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly horizontal centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps. This horizontal centrifugal pump is equipped with explosion-proof device, which makes the equipment safer.

Flow：50-7500 GPM
Head：3-20 Bar
The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy-saving, environment-friendly vertical centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps. In addition, according to different operating temperatures and mediums, we developed the hot-water pump(IRG), corrosion-resistant chemical pump(IHG) and oil pump (YG) – . This pump enjoys excellent performance, good reliability, long operation life, reasonable construction and nice appearance, which is outstanding in the industry.

CDL multistage pipeline centrifugal pump is my unit at home and abroad on the basis of excellent pump type combined with user requirements and fire protection standards.

The operation efficiency of the vertical turbine pump is very high if you choose the right model. The premise is to choose the correct model according to the use environment. The vertical electric fire pump is also a long-axis fire pump. The lift, flow and power can meet the needs of most users. Fire pump manufacturers should be responsible for the performance and quality of each type of long-axis fire pump to ensure the normal use of customers.

The Horizontal Multistage Pump is an exceptional engineering solution that offers high performance and reliability for fluid handling applications. With its unique multistage impeller design, it delivers efficient and incremental pressure boosting for high-pressure and high-flow scenarios. Whether used in water supply systems, industrial processes, irrigation, or building cooling, this pump ensures stable water pressure and flow.

used for pumping normal temperature water and warm water under 100°C from wells, river, lake , sea. Type JCW are better used for city, factory dirty water and water containing great sand in river and sea, widely used in factories and mines, city and countries, petrolatum filed, plant and irrigation on farmland.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.