NFPA20 Standard Fire Pump EDJ Fire Fire pump set

Diesel fire pumps are ideal for applications where a separate pump room already exists or where the pump room is located on an exterior wall. Facilities using diesel fire pumps include warehouses, aircraft hangars and industrial facilities. Since they have a larger footprint than electric fire pumps, they are not suitable for installations where space is small. Unlike diesel pumps, electric fire pumps can be located inside buildings. Office buildings and apartments are often equipped with electric fire pumps. In addition, upper floors sometimes install an additional electric fire pump above ground or basement to increase water pressure.

The EEJ Fire Pump System is an innovative solution designed to enhance fire safety in various settings. With exceptional performance and efficiency, the EEJ Fire Pump System delivers high pressure and large flow capacity, enabling rapid and effective fire suppression. Its intelligent features, including real-time monitoring and remote control capabilities, contribute to the system’s reliability and ease of operation. Overall, the EEJ Fire Pump System is a reliable choice for safeguarding lives and properties, making it an ideal fire protection solution for commercial buildings, industrial facilities, and residential areas.

EDJ Fire pump set consists of a main electric pump(driven by electric motor),standby diesel pump(driven by diesel engine), and a jockey pump.Pumps are assembled with discharge pipe and suction pipe as well as ControlPanel.And this fire pump system can be customized for different purposes such as high rise buildings, warehouses,facilties,hospitals,supermarkets, shopping malls, vllas,apartments,etc.

The small EJ fire pump set is suitable for low buildings. The fire pump set consists of an ISW electric pump and a CDL jockey pump. The ISW pump is easy to install and maintain, no need to disassemble or move the piping system, just lift the pump to connect the flat nut to take out all the rotors part. The impeller is directly mounted on the main shaft of the motor, with a short axial dimension and a compact structure, which can calibrate the rounding of the pump to effectively generate radial and axial loads, thereby ensuring smooth operation, vibration and low noise of the pump.

Fire pump system is made of Diesel+Jockey pump
1. Diesel engine pump, can use single stage pump, horizontal split case pump, end suction pump, multistage pump, material can be cast iron, stainless steel, and bronze impeller , with fuel tank, water tank，fan, control box
2. Jockey pump, horizontal or vertical, capacity will be small, but head should be higher than electric and diesel engine pump
Jockey material casing: cast iron, shaft and impeller: SS304

The biggest difference between a diesel engine fire pump and an electric water pump is that it has its own independent power supply system, which ensures the normal operation of the project without power or power supply. Its role is self-evident, and it can be said to be a great helper in fire emergency .
In terms of industrial applications, diesel engine fire pumps are widely used in emergency water supply for large-scale projects such as high-rise buildings, steel plants, chemical plants, hotels, and water works.

Double power fire pump product advantage is that when a fire occurs, a more reliable way to ensure water safety, in the normal power supply when the electric pump group into work, when the power supply failure, the electric fire pump can not be normally put into use, the diesel fire pump group can automatically put into operation to ensure the normal fire fighting.

Application Scope:

Equipment for small buildings, warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

Using Instruction:

Altitude ≤ 1000m;

Ambient temperature: +5 °C ~ +40 °C;

Relative humidity: <= 90%.

Fire pumps can encounter various issues that affect their performance. This article provides an in-depth guide to troubleshooting common problems, including cavitation, air binding, and leaks. It offers step-by-step solutions and preventive measures to address these issues and maintain reliable fire pump operations.

The bought fire fighting outfit has been successfully loaded on the truck moment. It’s composed of delirium liquid position hand, air force air compressor, curvaceous stopcock air compressor and other factors, and the fire water force within 10 twinkles. The device can also be connected in resemblant with signals similar as fire pipings, fire buttons, bank admonitions, temperature and pressure to control fire pump outfit.

This outfit is suitable for hospices, manufactories, storages, domestic diggings, office structures, entertainment places, low- rise structures that are inconvenient to set up high- position water tanks, or hidden systems, temporary structures and other structures that aren’t suitable for high- position water tanks.
The bought fire fighting outfit has been successfully loaded on the truck moment. It’s composed of delirium liquid position hand, air force air compressor, curvaceous stopcock air compressor and other factors, and the fire water force within 10 twinkles. The device can also be connected in resemblant with signals similar as fire pipings, fire buttons, bank admonitions, temperature and pressure to control fire pump outfit.

This outfit is suitable for hospices, manufactories, storages, domestic diggings, office structures, entertainment places, low- rise structures that are inconvenient to set up high- position water tanks, or hidden systems, temporary structures and other structures that aren’t suitable for high- position water tanks.

EDJ fire pump set is composed of electric pump + diesel pump + jockey pump. They are mainly composed of XA pump driven by electric motor and spare pump of XA pump driven by diesel engine. The flow rate is large and the lift is high. This set of equipment is suitable for all kinds of fire fighting. emergency situations.

EEJ Fire Pump Set is 2 electric pumps and a jockey pump. It can meet 120~1500GPM . The head is less than 150m.

Application Scope
Equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

Using Instruction
Altitude: ≤ 1000m;
Ambient temperature: +5 °C ~ +40 °C;
Relative humidity: <= 90%.

Choose the installation location: Ensure it’s a clean, ventilated, and non-flood-prone area.
Prepare a solid foundation: Use a robust concrete base to minimize vibration.
Follow manufacturer guidelines: Properly align and secure the pump and diesel engine.
Connect fuel supply and exhaust systems: Ensure safe fuel storage and proper exhaust ventilation.

One way of choosing a diesel generator as a backup power source for fire protection is because in fire protection, two power supplies are required, which can be two power plants and two transformers, or one line of city power and one line of diesel generator set power supply. Meet the requirements of fire backup power.

Flow: 120GPM≤Q≤1500GPM
Rated pressure: ＜150m
Speed: 2950 to 3550 RPM
Frequency: 50Hz or 60Hz

1. When installing the water inlet pipe, the horizontal section should be horizontal or upward
2. There are many elbows used on the water inlet pipe
3. The water inlet of the water pump is directly connected with the elbow
4. The last section of the water inlet pipe equipped with a bottom valve is not vertical
5. The position of the water inlet of the water inlet pipe is wrong
6. The outlet pipe is above the normal water level of the outlet pool

With the characteristics of full sealing, no leakage and corrosion resistance, fire pumps are widely used in environmental protection, water treatment, fire protection and other departments. They are ideal pumps for building non-leakage, non-pollution civilized workshops and civilized factories. Our commonly used fire pumps are electric fire pumps and diesel engine fire pumps. The difference between the two is that the electric fire pump needs power system supply. If the power is cut off, the diesel engine fire pump can be started at any time to make up for the original position of the electric fire pump.

The EDJ fire pump group is composed of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the stabilized pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

The diesel engine fire pump set has good starting performance, compact structure, humanized design, convenient maintenance, simple and convenient use, and high degree of automation. It is a very good fire pump. The diesel engine fire pump has the advantages of long head and wide application range, and can meet the fire water supply in multiple places such as warehouses, docks, airports, power plants, liquefied gas stations, and petrochemical industries.

The electric motor fire pump is an important water supply equipment in the fire protection system. The electric motor fire pump has a wide range of head, flow and power, and can be used in many environments. Providing sufficient water supply is the key to ensure emergency use.

Non-UL Flow：30-9000 GPM
Non-UL Head： 3-20 Bar (40-300 psi)
UL Flow：50-3000 GPM
UL Head： 5-20 Bar (72.5-290 psi)
The EDJ Fire Pump Set includes diesel engine pumps, electric pumps and jockey pumps.

This fire pump set is composed of diesel pump and stabilized pump. It adopts IS pump, which has advantages in price and is not affected by mains electricity. It is suitable for warehouses, docks, airports, petrochemicals, power plants, liquefied gas, textiles, ships , oil tankers and other fire-fighting occasions.

XBD series fire pump set is mainly used for fire hydrant fire extinguishing system, automatic sprinkler fire extinguishing system, etc. in fixed fire fighting systems of various enterprises and institutions, engineering construction, high-rise buildings, etc. The chemical properties are similar to the medium of water, and it can also be used for fire protection, living, production, public water supply systems and buildings, municipal water supply and drainage, etc.

The EDJ model is basically a combination of Electric, Deisel and Jockey pumps. They mainly consist of an electric motor driven end suction pump and a backup pump of a diesel engine driven end suction pump. It is also combined with a jockey pump for maintenance to form a complete skid.
The complete EDJ style skid is assembled with all discharge line fittings and connected to the skid mounted control panel.

The electric pump and diesel engine pump of this set of fire pump equipment use ISO pump, the jockey pump adopts CDL pump, the three fire pumps automatically start and stop, and the diesel engine pump is the backup pump. This set of fire pump equipment is not affected by the mains, can work even without electricity, and can be used in any emergency firefighting occasions.

1.Flow: 50-5000GPM
2.Head: 3-20Bar
3.Speed: 740-2900r/min
4.Power: Electric pump: 1.5-710 kw, Jockey pump: 0.55-160kw
The EEJ Fire Pump System includes two electric pumps and a jockey pump.With exceptional performance and efficiency, the EEJ Fire Pump System delivers high pressure and large flow capacity, enabling rapid and effective fire suppression.
In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants,oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

Diesel engine fire pump has the advantages of light weight, small size, flexible movement, fast start, fast water discharge time, large fuel tank capacity, corrosion resistance, reliable use, convenient maintenance, fast automatic start, self-starting, and can be refueled after dry operation . Heavy-duty pump bearings last longer; other components are made of high-quality copper and stainless steel or customer. Diesel engine fire pump high efficiency open impeller design can handle large solids and abrasives while maintaining high flow rates and high volume air handling for use in more “well point dewatering projects”.

Fire pumps are widely used in our lives, such as in water treatment, fire safety and other departments. At the same time, it has the characteristics of full sealing, no leakage and corrosion resistance, and is widely used in life and production. In transportation and The storage aspect also shows its excellent characteristics, and it has become an indispensable device in many places now.
In people’s common sense, the fire pump is mainly used for water delivery in the fire protection system. As an indispensable tool for the fire protection system, the fire pump also has the characteristics of simple structure and stable performance, and its high speed, small size and high efficiency are also a major advantage. , it is precisely because of these advantages of high performance and low energy consumption that the safety and efficiency of the fire pump are far ahead of the pipeline tools of the same purpose.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar
The DJ Fire Pump Set is a combination system consisting of a diesel engine pump and a jockey pump, designed for fire safety in the construction and industrial sectors. This system utilizes the powerful power output of the diesel engine pump, ensuring reliable operation even in the event of a power outage.