OTS Diesel Fire Pump

The fire pumps used in diesel engine fire pump sets can be IS series single-stage type, S series new single-stage double-stage type, and D-type series segmental multi-stage type produced by our company. The diesel engines used in this series of equipment are domestic or imported products, which have the characteristics of good starting characteristics, strong overload capacity, compact structure, convenient maintenance, simple use, and high degree of automation. It is a reliable fire-fighting equipment.

The XBC-OTS (100LPS,100M) Diesel Engine Fire Pump is an essential equipment in firefighting systems, designed to meet emergency firefighting needs. Whether during power outages or in the absence of electricity supply, it provides reliable water supply and increases firefighting water pressure to ensure smooth firefighting operations. The XBC-OTS Diesel Engine Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

The diesel engine fire pump is installed together with the electrical instrument, with complete functions, compact structure, automatic fault alarm, accepting the starting signal, and can automatically complete the starting procedure and run at full load quickly. When the diesel engine fire pump is insufficient in fuel, low battery voltage, and high lubricating oil temperature , enough to ensure that the diesel engine fire pump starts in a low temperature environment, the entire system of the diesel engine fire pump is safe, reliable, and easy to use. Diesel engine fire pumps can be widely used in environmental protection, water treatment and fire protection departments to transport various liquids by using their own advantages.

Diesel emergency fire pumps are suitable for pressurized water supply in fire pipelines. Or it is used to transport clear water or other liquids with physical and chemical properties similar to clear water for pressurization. The temperature of the medium does not exceed 80°C. It is suitable for industrial and urban water supply and drainage, pressurized water supply for high-rise buildings, garden sprinkler irrigation, long-distance water supply, heating, bathroom and other cold and hot water cycle pressurization and equipment matching.

Flow：80-4000 GPM
Head：3-15 Bar
Power：11-1000 kw
The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

Diesel engine fire pump has the advantages of light weight, small size, flexible movement, fast start, fast water discharge time, large fuel tank capacity, corrosion resistance, reliable use, convenient maintenance, fast automatic start, self-starting, and can be refueled after dry operation . Heavy-duty pump bearings last longer; other components are made of high-quality copper and stainless steel or customer. Diesel engine fire pump high efficiency open impeller design can handle large solids and abrasives while maintaining high flow rates and high volume air handling for use in more “well point dewatering projects”.

Standard:
       UL    Flow：100-3000 GPM    Head： 90-250 PSI 
       NON-UL   Flow：100-10000GPM   Head： 40-250 PSI 

The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

Diesel engine fire pump unit is a kind of pump equipment that is widely used in fire protection, and it is more suitable for mobile work in fire pumps. In fact, it is driven by a diesel engine connected to the pump head of the fire pump. Compared with motor drive, it can be used in the field, mines, and places lacking power supply. It is also called a diesel engine pump or a diesel engine fire pump unit.

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 

·NON-UL  Standard:
Flow：50-5000GPM 
Head： 40-250 PSI 

The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

A suction tank provides a stable and continuous water supply to the fire pump. It helps prevent air entrapment and ensures that the pump receives a consistent flow of water during operation.

The diesel engine fire pump is a kind of electromechanical integration equipment which can be driven directly by the fire pump and can start and finish the water supply in a short time. It is suitable for agricultural irrigation, rescue and relief, smelting, aircraft depot, petrochemical oil depot, liquefied gas station, textile and other fire-fighting water supply occasions, especially in the case of power supply cannot be satisfied, the choice of diesel-driven pumps is a reliable and guaranteed equipment choice.

Diesel engine vertical turbine fire pump, consisting of vertical turbine pump, diesel engine and gearbox

Vertical Turbine Pump are commonly used in various type of applications, from fire fighting use to moving process water in
industrial plants to providing flow for cooling towers at power plants, from pumping raw water for irrigation, to boosting water
pressure in municipal pumping systems, and for virtually every other imaginable pumping application.

The XBC-S 100LPS, 100M fire pump boasts a flow rate of 100 liters per second and a head of 100 meters. This means it can swiftly deliver a large volume of water to the fire protection system, enabling quick response to fires and emergency situations. Whether in commercial buildings, industrial plants, or municipal projects, this fire pump provides reliable and efficient firefighting capabilities.

Environmental and Working Conditions
Ambient temperature:
Ambient temperature range 4℃-40℃.
Working to improve the ambient temperature every 5℃, its power decreased by 1%(to 25℃ as the base);
Altitude:
Reference elevation 91.4m, the reference atmospheric pressure is 100KPa;
If the work to an altitude of over 1000m, reference should be corrected GB1105 1-1987 diesel engine power, you can consult the specific technical department;
Relative humidity ≤80% (20℃), outdoor allow 90% (when installed outdoors in the order presented, you can choose to configure the outdoor structure, protection class IP55).

Diesel engine fire pump is suitable for unattended fire water supply system. Diesel engine fire pump is mainly used for fire hydrant fire extinguishing, automatic sprinkler fire extinguishing and other fire fighting systems in fixed fire fighting systems such as industrial and mining enterprises, engineering construction, and high-rise buildings. The clean water and chemical properties of the particles are similar to the medium of water, and can also be used in life, production and shared water supply systems and buildings, municipal water supply and drainage, docks, offshore platforms and other occasions without power supply.

The diesel engine fire pump set has three perfect starting functions:
​​
1. Manual start function: manual and automatic interlocking can be completed through the changeover switch, and the manual start function can be realized:
​​
2. Automatic manual function: three starts are allowed. If the three starts are unsuccessful, a “start failure alarm” will be issued and the starting state will be automatically exited; after one successful start, the time from starting to rated load is 5-10-15S (depending on the capacity of the unit). );
​​
3. Emergency manual direct start function: when the automatic control device fails, the emergency manual direct start function can be realized.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The Diesel Engine End Suction Fire Pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more.

Self-priming fire pump is a mechatronics equipment researched and developed according to the provisions of my country’s fire regulations and the different requirements of various users. The product is innovative, advanced and practical. It simplifies the design of the pump room. The underground pump room can be changed to the ground, which is convenient for construction and saves investment; the outdoor pool can also be used to meet the requirements of use; the self-priming function can be used to make the fire pool deeper. To 3-6m, under the same effective volume, the land area occupied by the pool is much smaller than the original, which saves land, facilitates construction, reduces construction costs, and greatly saves investment; it can work under the condition of negative water level and meet the requirements in time. Fire protection requirements; the self-priming fire pump can discharge water in time to rescue and extinguish fires in time; it has a strict and reliable automatic circuit detection function, so that the unit is usually in a quasi-fire-fighting state.

Flow：80-2700 GPM
Head：10-24 Bar 145-350 psi
Power：11-1000 kw
Caliber：65-300 mm
Frequency：50 or 60 Hz
Working Pressure：≤2.5 MPa

Ensure rapid and reliable fire protection with the Single Cylinder Diesel Self-Priming Fire Pump. This advanced pump offers automatic startup within 15 seconds of receiving fire signals, guaranteeing immediate response. Its automatic charging system ensures smooth operation, while built-in alarms and protections provide enhanced safety. With automatic preheating and a direct connection design, this pump is both efficient and reliable. It is suitable for various applications in areas where firefighting vehicles face limitations. The Single Cylinder Diesel Self-Priming Fire Pump is ideal for areas where access by firefighting vehicles is limited, such as small towns, industrial ports, and rural areas.

The diesel engine-powered water pump of the fire pump set is composed of horizontal centrifugal pumps, diesel engines, electrical instruments and other equipment, which are tightly installed on a common chassis, and connected with the electric control box through control lines and signal lines. The complete set of water supply equipment for diesel engines can be used in various enterprises. The production of automatic/manual water supply systems can also be used for fire water supply and occasions with special requirements.

The Handheld Diesel Engine Fire Pump is a fire pump package with resource and light diesel engine components. The hand-held diesel engine fire pump unit is composed of light gasoline engine or diesel engine and fire pump system supporting facilities. The space layout should be reasonable, the structure should be compact, the volume should be small, the net weight is ≦100kg, the vacuum pump sealing performance is ≦2.6kPa, Main parameters such as maximum vacuum value≧85.0kPa, water intake time≦35.0s, etc. The whole equipment is composed of centrifugal water pump, water extractor, motor gasoline, diesel engine and other components.

Flow：50-5000 GPM
Head： 3-16 Bar
Experience efficient fluid transfer with the XBC-XA Diesel Single stage centrifugal pump. With its unique design and powerful diesel engine, this pump offers reliable performance and exceptional pumping capacity. It is suitable for a wide range of applications, from industrial fluid transfer to fire protection systems.

Flow：80-2700 GPM
Head：10-24 Bar
Diesel Engine Multistage Fire Pump is a versatile and reliable firefighting solution designed for a wide range of applications. Whether it’s industrial facilities, commercial buildings, residential complexes, or public infrastructure, Diesel Engine Multistage Fire Pump ensures effective fire protection. With its robust design and advanced features, this pump set is ready to tackle emergencies and safeguard lives and properties in various firefighting scenarios.

Diesel engine fire pump sets are mainly suitable for fire water supply and foam fire extinguishing systems in petrochemical, natural gas, power generation, cotton and linen textiles, warehouses, airports, docks, high-rise buildings and other industries. It can also be used in occasions such as water ships, offshore oil tankers and fire fighting ships. The unit adopts imported diesel engine and fire pump. It has the characteristics of quick start, reliable water diversion, reasonable power reserve, stable operation, high degree of “three modernizations”, wide range of pressure and flow, etc. It is an advanced and reliable fire-fighting equipment.

Diesel engine fire pumps are often used for emergency water supply in high-rise buildings, water companies, steel plants, wineries, chemical plants, hotels, hospitals, and other large-scale projects. Diesel engine fire pump is suitable for unattended emergency water supply system. The product has the characteristics of advanced technology, high degree of automation, superior performance, complete protection functions, reasonable structure, simple installation, and high cost performance. net pressure. Diesel engine fire pumps are selected according to different working conditions: single-stage single-suction centrifugal pumps, high-pressure multi-stage pumps, double-suction split pumps, etc.

Diesel engine fire pump, as a fixed fire extinguishing equipment, has been widely used in fire diversion, especially in the case of no power supply or abnormal power supply and other emergencies, other diesel engines can also be equipped as power engines according to the needs of users.

The flow rate of ordinary diesel pump is generally low, and sometimes it can not meet the requirements of customers. Nowadays, the diesel pump with large flow rate has been developed. It uses double suction ports, which is twice the flow rate of ordinary diesel pump. Moreover, the structure is more reasonable, the NPSH is small, and it is more durable,