Product Introduction of Electric Fire Pumps

Oil-water separator is a device, divided into catering oil-water separator and industrial oil-water separator. Catering oil and water separator is used to treat sewage in the catering industry; Because of the requirements of environmental protection, the sewage produced by the ship machinery space in rivers and lakes must be treated, and the industrial oil-water separator is needed.

The effectiveness of the foam solution depends on the type of foam concentrate and the conditions in which it is stored. Typically, the foam solution should be used immediately for optimal performance.

The submersible sewage pump has features such as easy installation and maintenance, high working efficiency, anti-clogging and anti-winding design, which make it an ideal choice for industrial, municipal or commercial waste discharge system, septic tank, piggery, farmland irrigation.

Submersible pump is an important equipment for deep well water extraction. During use, the whole unit works in the water to extract groundwater to the surface, which is used for domestic water, mine rescue, industrial cooling, farmland irrigation, sea water lifting, ship load regulation, and fountain landscape.

It suitable for factory business seriously polluted wastewater emissions, residential sewage PaiWuZhan, urban sewage treatment plant drainage systems, air-defense drainage station, waterworks water supply equipment, hospital, hotel of sewage, municipal engineering, construction, mining machine, rural biogas digester, irrigation and other industries, sewage containing particles, dirt, Can also be used for clean water and with weak corrosive media.

The integrated prefabricated pumping station is the lifting equipment for lifting sewage, rainwater, drinking water and waste water.

Foam proportioning systems enhance the fire suppression capabilities of water, reduce the amount of water needed, minimize water damage, and can effectively smother fires by cutting off the oxygen supply.

The waste cone is providing quick visual confirmation of proper water flow in the fire pump system.

The domestic water supply equipment system is equipped with storage tanks and other water storage facilities, which saves the floor area and reduces the construction load, thereby saving a large amount of civil engineering investment costs. The intelligent and automatic operation of the equipment does not require a special person to be on duty, which saves management costs, and there is no water quality treatment instrument, which eliminates the need for regular cleaning and disinfection; the loss of system dripping, leakage, and overflow is reduced.

PHYM100/20、PHYM100/30、PHYM100/40、PHYM100/50、PHYM100/60、
PHYM100/70、PHYM100/80、PHYM100/90、PHYM100/100

Hygienic and clean to use, high efficiency, low noise, mild corrosion resistance and compact structure, beautiful appearance, small size, light weight, convenient use and maintenance, reliable sealing performance

The remote monitoring system for the water supply pump station is suitable for the remote monitoring and management of the pressurized pump station in the urban water supply system.
The pump station manager can remotely monitor the water level of the pump station pool or the entry pressure, the working status of the booster pump group, the outbound flow, and the exit pressure from the monitoring center; they can remotely control and automatically control the start and stop of the booster pump group; When optical fiber communication is used, the panorama and important stations in the station can be monitored by image, so that the pump station can be unattended.

PW pumps are single-stage single-suction cantilever centrifugal pump for pumping dirty liquid (liquid containing fibers and other suspended objects or stool), liquid temperature does not exceed 100 ℃ , suitable for urban, rural, industrial and mining sectors excluded sewage purposes

The sewage pump station is to enhance the sewage, rainwater, drinking water, wastewater and other equipment to enhance the drainage, the factory focus on design, manufacture, assembly and transported to the site to install a new generation of environmentally friendly turnkey pumping station.

Air conditioning pump is a pump designed for sewage discharge. Air conditioning pump is suitable for heavy, polluted condensate drainage needs, can be used for high temperature and weak acid condensate removal (temperature -46~95℃), can be used in air conditioning system and refrigeration equipment.

The box-type non-negative pressure water supply equipment can be directly linked to the water supply network to ensure that the water supply network does not generate negative pressure. The pressurized water in the closed tank at peak time can compensate for the shortage of water supply in the water supply network and meet the needs of users.

These are pictures of an EJ fire pump set control panel. The cabinet is made of galvanized sheet.

Export fire pump set will be packaged with free fumigating wooden case.

The diesel engine irrigation pump can adapt to various harsh irrigation environments. It has simple structure, light weight and convenient movement. Without on-site installation, it can be directly put into use. With high-pressure design, the irrigation range is large and the effect is good. The company is committed to developing the best irrigation pump to allow customers in all regions to solve farmland irrigation problems.

For end suction pumps and since water is entering one side of the impeller, and due to the design of “Impeller overhung”, these pumps cannot be used for large water flow applications and usually not exceeding 1500 gpm of flow.

Features:
The double-blade impeller structure is adopted, which greatly improves the passing capacity of dirt.
The mechanical seal adopts a new type of grinding pair, and runs in the oil chamber for a long time;
The overall structure is compact, the volume is small, the noise is low, the energy saving effect is remarkable, the maintenance is convenient, and the user is convenient to replace;
Can be used within the design range without overloading the motor.

It has the advantages of simple installation, small footprint, convenient maintenance and no noise. It is widely used in municipal engineering, factories, businesses, hospitals, hotels, residential areas and other sewage discharge.

XBD series fire pumps are mainly used for the fixed fire hydrant firesystem, automatic spraying fire system used by all sorts of organs, projects, high-floor buildings etc. and can be trans ferred with the clear water without solid grain under 100 – ℃ or its equivalence, also be used for public-used water providing system for fire, living, production, construction and municipality.

The sewage pump is a kind of centrifugal impurity and has many forms: such as submersible type and dry type. At present, the most common submersible type is the WQ type submersible sewage pump, and the most common dry type sewage pump is the W type horizontal sewage pump. And two types of WL vertical sewage pump. Mainly used to transport urban sewage, manure or liquid containing fiber. For the medium of solid particles such as paper scraps, the temperature of the conveyed medium is usually not greater than 80¡ãC.

It is composed of pressure water tank, control cabinet, top pressure gas storage system, decompression release device and other basic components; In the condition of fire fighting, the compressed gas is filled into the pressure water tank to replace the fire fighting water in the tank, and always maintain the rated working pressure of fire fighting, and the fixed fire water supply equipment for the fire fighting pipe network.

Fire pumps are a type of pump used in fire fighting. Compared to ordinary pumps, fire pumps have higher standards and requirements in terms of sealing, corrosion resistance and operational efficiency. Before running the fire pump equipment, we need to discharge the gas inside the pump, do you know what is the significance of doing so? The following is the answer from Shanghai Xizhiquan.

1. If there is gas inside the fire pump, then the equipment cannot form a sufficient vacuum during operation, resulting in the liquid not being able to be sucked up. This phenomenon is called gas binding, and is a phenomenon that often results from many operators not understanding this operation.
2, understand the formation of gas binding causes, we will understand how to avoid this problem occurs. Before the fire pump equipment is started, the pump casing needs to be filled with liquid. In the pump suction pipe mouth need to be equipped with a non-return valve, can effectively avoid the pump in the liquid due to gravity into the low tank, if the pump position is low, there is no need to carry out filling the pump.
3. The compressed gas inside the fire pump will occupy a certain space in the fire pump, making it impossible to seal it.

Therefore, the operation of deflating the fire pump before putting it into use can increase the vacuum of the equipment and increase the pumping capacity of the pump, thus effectively improving the efficiency of the equipment and reducing the waste of resources.

As a complete set of equipment, it can meet all technical specifications of automatic fire water supply. In addition, it can accept and process all kinds of fire signals, replace the fire control center,
and send out all kinds of operation and fault alarm signals. 

Centrifugal pump is designed according to the principle of centrifugal force. The high-speed rotating impeller blade drives the water to rotate and the water is thrown out, so as to achieve the purpose of transportation

While the initial investment in firefighting pumps and fire protection infrastructure may represent a significant capital expenditure, the long-term benefits of enhanced fire safety, reduced property damage, and potential savings in insurance premiums outweigh the costs. Cost-benefit analyses and risk assessments help stakeholders make informed decisions about allocating resources to improve fire protection capabilities and mitigate financial risks associated with fire emergencies.

YCB series multistage centrifugal oil pump is used mainly for petroleum refining, petrochemical and chemical industries to transport the petroleum-containing no solid grains, liquefied petroleum gas, other petroleum products, high-temperature high pressure, combustible and explosive liquids.This horizontal oil pump is an electric pump with explosion-proof device, which can be customized.