QJB submersible mixer

The integrated prefabricated sewage pumping station of Beide Technology Group Co., Ltd. serves the glass production base in Xingan County Development Zone, Ji’an, Jiangxi Province. On-site commissioning training is delivered to relevant departments. Thank you and leaders for the support.

The effectiveness of the foam solution depends on the type of foam concentrate and the conditions in which it is stored. Typically, the foam solution should be used immediately for optimal performance.

Filter is an indispensable device on the transmission medium pipeline, usually installed in the pressure reducing valve, pressure relief valve, fixed water level valve, square filter other equipment import end equipment.

The remote monitoring system for the water supply pump station is suitable for the remote monitoring and management of the pressurized pump station in the urban water supply system.
The pump station manager can remotely monitor the water level of the pump station pool or the entry pressure, the working status of the booster pump group, the outbound flow, and the exit pressure from the monitoring center; they can remotely control and automatically control the start and stop of the booster pump group; When optical fiber communication is used, the panorama and important stations in the station can be monitored by image, so that the pump station can be unattended.

ZX series self-priming pump is a self-priming centrifugal pump. The self-priming centrifugal pump has the advantages of compact structure, convenient operation, stable operation, easy maintenance, high efficiency, long life, and strong self-priming ability. There is no need to install a bottom valve in the pipeline, and it is only necessary to ensure that there is a quantitative liquid in the pump body before work. Therefore, the self-priming centrifugal pump simplifies the pipeline system and improves the working conditions.

The box-type non-negative pressure water supply equipment can be directly linked to the water supply network to ensure that the water supply network does not generate negative pressure. The pressurized water in the closed tank at peak time can compensate for the shortage of water supply in the water supply network and meet the needs of users.

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

Electric fire pump controllers are designed to start an electric motor driven fire pump.Diesel engine fire pump contollers are designed to automatically start a diesel engine driven fire pump upon detection of a pressure drop in the fire protection system.

Small frequency conversion water supply equipment is a kind of equipment developed under the support of frequency conversion speed regulation system and frequency conversion technology. Its application in water supply equipment management shows good economy and environmental protection. Life and production play a very important role.

Product Overview
Product Introduction of ISG, ISW single-stage single-centrifugal pump
ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly vertical centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps. In addition, according to different operation temperatures and mediums, we developed the hot-water pump (IRG), corrosion-resistant chemical pump (IHG) and oil pump (YG). This pump enjoys excellent performance, good reliability, long operation life, reasonable construction and nice appearance, which is outstanding in the industry.

XBD-S fire pump is a horizontal split structure type. The suction port and the discharge port are below the axis of the pump, and the horizontal direction is perpendicular to the axis. The pump of this structure type does not need to disassemble the inlet and outlet pipes during maintenance. Installation and maintenance is very convenient. The rotor as a whole
The combined parts can be hoisted as a whole for easy maintenance, and the same rotor part can be used for reverse rotation. The bearings at both ends are made of high-precision imported deep groove ball bearings, which have smooth operation, low noise and long service life.
Shaft seals are available in two types: mechanical seals or packing seals, and users can choose by themselves.

The integrated prefabricated pumping station is the lifting equipment for lifting sewage, rainwater, drinking water and waste water.

The fire control cabinet is widely used in many high-rise buildings, shopping malls, schools and other crowded places. This equipment enables the fire pump to cut off the circuit or alarm through the components in the fire control cabinet when it fails, and play a warning and The role of protection.

The electrical control cabinet of the fire pump set has the switching control mode of single pump, multiple pumps, and multiple main and standby pumps. According to the power of the pump and user requirements, the starting mode of the pump motor can be configured as direct start, star-delta start and other forms.

The multistage pump is a centrifugal pump in and out of the water section and the middle section, through the rod combination together, its output water pressure can be very large, but also depends on the rotation of the impeller to obtain the centrifugal force, so that the material. When the gas density reaches the working range of the mechanical vacuum pump, it is extracted, and the high vacuum is gradually obtained.

1.Enterprise unit waste water discharge.
2.Urban sewage treatment plant discharge system.
3.Hospital, hotel, high-rise building sewage discharge.

This type of pump truck is mainly suitable for urban areas, tunnel rescue and various complex working conditions. The effects of stability and shock absorption are also two of its major points. It is mainly used for flood control and drought relief, emergency drainage, etc.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water lift pipe, etc. The specific fire pump model is determined according to the environment and performance requirements, and at the same time According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

Vertical turbine pumps are commonly used in municipal water supply systems, agricultural irrigation systems, industrial water supply and wastewater treatment systems, and in mining and oil extraction operations.

Capacity:50-1000L
Type:
Single-Wall Fuel Tank
Double-Wall Fuel Tank

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly vertical centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps. In addition, according to different operation temperatures and mediums, we developed the hot-water pump (IRG), corrosion-resistant chemical pump (IHG) and oil pump (YG). This pump enjoys excellent performance, good reliability, long operation life, reasonable construction and nice appearance, which is outstanding in the industry.

Centrifugal pump is a blade pump that depends on the centrifugal force generated when the impeller rotates to deliver liquid. In the process of rotating the impeller, due to the interaction between the blade and the liquid, the blade will transmit mechanical energy to the liquid, so that the pressure of the liquid can be increased to achieve the purpose of conveying liquid.

XZQ type intelligent automatic complete set of water supply equipment can be used for the old water supply and drainage pressure system reform, can cancel the water tower, high water tank and pressure tank. Industry needs constant pressure water supply system, oil field constant pressure oil transmission system.

For end suction pumps and since water is entering one side of the impeller, and due to the design of “Impeller overhung”, these pumps cannot be used for large water flow applications and usually not exceeding 1500 gpm of flow.

1. In the rural areas is mainly used as feces, mud and water, feed slurry pumping and pouring, instead of shoulder, and for flood, drought resistance, mud manure production can also simple flow fire pump in countryside.
2. Used in municipal engineering, chemical industry, printing and dyeing, pharmaceutical, shipbuilding, foundry, food and other industry suction thick liquid, dirty liquid, paste , flow sand and urban river flow sludge etc. can also be used in coal mines exclude fluid containing small mud gravel.
3. If with high pressure pump and water gun, the composition of hydraulic mechanized earthmoving machine, available in the formation of land, river and pond dredging, drilling and other small-scale water conservancy projects of excavation and transportation, and urban air defense engineering, underground engineering.
4. Fish used as a water pond, fish pond oxygen etc..

These photos show some of our diesel engine in stock. We cooperate with many diesel engine manufacturers to meet the needs of customers for different diesel engine brands.

Integrated Prefabricated Pump Station

The pump station is supplied as an integrated unit. It includes a pump station cylinder, pressure pipeline, maintenance platform, maintenance ladder, grill filter, coupling system, pump lifting system, ventilation, anti-skid manhole cover, lighting system, etc.

According to CFO fluid dynamics finite element analysis, the base structure is optimized to prevent sludge deposition in sewage treatment and no odor residue.

All internal installation and commissioning work is completed in the factory. The pump station is only installed on the site, which greatly reduces the civil construction period and engineering cost, and reduces the overall investment of the owner.

The pumping station cylinder is made of FRP, and the internal fittings are made of anti-corrosion materials such as SUS304 and hot-dip galvanizing. No maintenance is required, and the normal service life can reach more than seven years.

Intelligent operating system, easy to understand, to run, monitoring without personnel supervision

Welcome your inquiry!

◆The temperature of the medium should not exceed 60℃, the weight of the medium should be 1-1.3kg/dm3, and the PH value should be in the range of 5-9.
◆For pumps without internal gravity circulation cooling system, the exposed liquid level of the motor part should not exceed 1/2.
◆The material of the main parts of this pump is cast iron, so it cannot be used for pumping highly corrosive liquids. If the conveying medium is corrosive, please choose a stainless steel submersible pump. If you also need an explosion-proof submersible pump, you must choose a stainless steel explosion-proof submersible pump.

Fire pumps are a type of pump used in fire fighting. Compared to ordinary pumps, fire pumps have higher standards and requirements in terms of sealing, corrosion resistance and operational efficiency. Before running the fire pump equipment, we need to discharge the gas inside the pump, do you know what is the significance of doing so? The following is the answer from Shanghai Xizhiquan.

1. If there is gas inside the fire pump, then the equipment cannot form a sufficient vacuum during operation, resulting in the liquid not being able to be sucked up. This phenomenon is called gas binding, and is a phenomenon that often results from many operators not understanding this operation.
2, understand the formation of gas binding causes, we will understand how to avoid this problem occurs. Before the fire pump equipment is started, the pump casing needs to be filled with liquid. In the pump suction pipe mouth need to be equipped with a non-return valve, can effectively avoid the pump in the liquid due to gravity into the low tank, if the pump position is low, there is no need to carry out filling the pump.
3. The compressed gas inside the fire pump will occupy a certain space in the fire pump, making it impossible to seal it.

Therefore, the operation of deflating the fire pump before putting it into use can increase the vacuum of the equipment and increase the pumping capacity of the pump, thus effectively improving the efficiency of the equipment and reducing the waste of resources.