QW type submersible sewage pump

When a partial failure of the equipment occurs, the emergency function can be enabled to continue the water supply. The equipment can be automatically connected to the municipal water supply network, and has dual constant pressure functions, which can meet the normal pressure and flow of domestic and production water, and can automatically switch to high-pressure and large-flow water supply when a fire occurs, and can be used for multiple purposes.

XA Bare Shaft Pump under painting
XA100/32,XA100/20,XA100/26

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly vertical centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps. In addition, according to different operation temperatures and mediums, we developed the hot-water pump (IRG), corrosion-resistant chemical pump (IHG) and oil pump (YG). This pump enjoys excellent performance, good reliability, long operation life, reasonable construction and nice appearance, which is outstanding in the industry.

Explosion-proof motor is a type of motor with explosion-proof performance. The measures taken are: the electrical equipment cover is installed in a casing, which has a structure that can withstand the explosion pressure of the internal explosive mixture and can prevent the internal explosion from spreading to the explosive mixture around the casing (flameproof type); make the motor Live parts are not likely to generate sparks, arcs or dangerous temperatures sufficient to cause an explosion hazard, or isolate live parts that could produce these phenomena from the explosive mixture so that they cannot come into contact with each other or to the extent that they are explosive (increase safety type, ventilation type, etc.). In all kinds of environments with explosive danger, it is very important to choose the explosion-proof motor matched with all kinds of equipment correctly.

Vertical inline close coupled fire pumps are specifically designed for vertical mounting. The suction and discharge nozzles are located on the same centerline 180° apart. Vertical pumps significantly reduce required mounting space. They are easy to maintain.

This device is suitable for fighting Class A (ordinary combustibles like wood, paper, and textiles), Class B (flammable liquids such as gasoline, oils, and alcohols), and some Class D (combustible metals like magnesium and titanium) fires, depending on the foam concentrate type used.

Magnetic steel generally refers to aluminum nickel cobalt alloy (magnetic steel in English AlNiCo is the abbreviation of aluminum nickel cobalt), magnetic steel is made of several hard strong metals, such as iron, aluminum, nickel, cobalt and other synthesis, sometimes copper, niobium, tantalum synthesis, used to make super hard permanent magnet alloy.

XBD series fire pumps are mainly used for the fixed fire hydrant firesystem, automatic spraying fire system used by all sorts of organs, projects, high-floor buildings etc. and can be trans ferred with the clear water without solid grain under 100 – ℃ or its equivalence, also be used for public-used water providing system for fire, living, production, construction and municipality.

Suitable for use with clean water. For Fire hydrant water supply, sprinkler system, fire system voltage regulator.

Fuel tank specifications：200L/ 400L/ 600L/ 800L/ 1000L/
1200L/ 1500L/ 1800L/ 2100L/ 2500L/ 3100L/ 3600L/ 4100L/ 4500L
The diesel fire pump system serves as a backup power solution, utilizing a diesel engine to provide power and ensure the fire pump’s reliable operation during electrical outages. The associated fuel tank is a crucial component for storing diesel fuel and providing a continuous supply to the diesel engine, ensuring a sustained water flow during fire incidents. The system not only boasts reliability but also requires minimal maintenance, backed by comprehensive after-sales service. Whether for large commercial buildings, industrial facilities, airports, or hospitals, this system offers users a dependable firefighting solution to safeguard security.

As the name implies, the fire pump is divided into different types according to different classification methods. It has the characteristics of full sealing, no leakage and corrosion resistance. It is widely used in environmental protection, water treatment, fire protection and other departments to pump various liquids. , It is an ideal pump for creating a leak-free, pollution-free civilized workshop and civilized factory. The pump type is similar to that of the fire protection system, but the lift and flow are different.

WQ(QW) series products in the rated voltage is
380 V or thter , power frequency for 50 Hz/60HZ when used
2、 the temperature of the medium no more than
40℃, medium density≤1150kg/m3, PH valuein 5～9
range.
3、 the altitude does not exceed 1000 meters
4、 transport medium viscosity not super 1000 CP
5、 products work operation must be completely submerged, but shall not be more than 10 m diving depth

The electric pump in the picture is ISW pump. ISW series horizontal single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly horizontal centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps. In addition, according to different operation temperatures and mediums, we developed the hot-water pump (ISWR), corrosion-resistant chemical pump (ISWH) and oil pump (ISWB).

The fire pump is a stainless steel outdoor control cabinet with waterproof features. The fire pump control cabinet is mainly suitable for industrial production and various building water supply, drainage, fire protection, sprinkler pipe network pressurization and HVAC cold and hot water circulation and other occasions automatic control of fire pump

1. The submersible sewage pump has a compact structure and a small footprint.
2. The submersible sewage pump is easy to install and maintain.
3. The submersible sewage pump has a long continuous operation time.
4. The submersible sewage pump does not have problems such as cavitation damage and irrigation and water diversion.
5. Submersible sewage pump. Low vibration and noise, low motor temperature rise, no pollution to the environment.

WQ (QW、WQK ) series submersible sewage pump applicable to transport containing solids and fiber of sewage or clean water.

The company introduced high-performance water pumps produced by German advanced technology. By using the prototype impeller and this type of impeller and its cutting, the pump has a full and broad model spectrum and high use efficiency. Within the range of model spectrum performance, the pump can provide
A pump that properly meets the working point of any flow and head required by the user.
It adopts the best hydraulic model at home and abroad that can self-balance axial force and radial force, with stable performance, high efficiency, compact structure, low vibration, high pressure resistance of the pump body, and convenient installation and maintenance.

The fire water supply pressure booster pump complete sets of equipment is the equipment for the firefighting project. The main function is to maintain the firefighting pressure of the fire extinguishing pipe network. When a fire alarm is opened, the fire extinguishing equipment can immediately spray the solid water column, and the alarm linkage starts the large fire pump. Win the initial fire extinguishing time of more than 30 seconds until the full load of the fire main pump is started. Because the equipment can maintain the pressure of the pipe network at all times, the pipe network does not have air to start. The fire pump does not slam, the pipe network has no risk of vibration.

The automatic water supply equipment automatically adjusts the number of running water pumps and the speed of a water pump according to the change of the user’s water consumption, so that the outlet pressure of the water pump remains constant.

NL type sewage slurry pump is mainly used in rural areas to suck, convey and sprinkle river mud, manure, river water and slurry feed. , but also guaranteed for the simple flow of rural fire pumps.

The non-negative pressure variable frequency water supply equipment takes the municipal pipe network as the water source, and makes full use of the original pressure of the municipal pipe network to form a closed continuous relay pressurized water supply mode, with good energy saving effect and no secondary pollution of water quality. Development and extension of water supply equipment.

PW pumps are single-stage single-suction cantilever centrifugal pump for pumping dirty liquid (liquid containing fibers and other suspended objects or stool), liquid temperature does not exceed 100 ℃ , suitable for urban, rural, industrial and mining sectors excluded sewage purposes

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy-saving and environmentally friendly vertical centrifugal pump developed by the company’s technical staff on the basis of absorbing the advanced technology of similar products at home and abroad, and using the performance parameters of domestic general centrifugal pumps. This series of pumps has excellent performance, high reliability, long life, reasonable structure and beautiful appearance, and has a leading level in the industry.

Hygienic and clean to use, high efficiency, low noise, mild corrosion resistance and compact structure, beautiful appearance, small size, light weight, convenient use and maintenance, reliable sealing performance

The pump is optimized by domestic advanced hydraulic model. At the same time according to the use of temperature, medium and other different ISW based on the derivation of hot water pump, high temperature pump, chemical pump, oil pump, is the current national standard finalize the promotion of products. Horizontal pipeline oil pump

This device is effective for Class A (ordinary combustibles), Class B (flammable liquids), and certain Class D (combustible metals) fires, depending on the type of foam concentrate used.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water lift pipe, etc. The specific fire pump model is determined according to the environment and performance requirements, and at the same time According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

The sewage lifting device is a system composed of a sewage pump, a water collecting tank, a control device, and related pipe fittings and valves, which is used to lift and transport waste water below the sewers or away from the municipal pipe network. It can effectively solve or avoid the problems existing in the traditional sump.

In view of its excellent performance and cost performance, single screw pump has gradually been widely used in China in recent years. Its main features are strong adaptability to the medium, stable flow, small pressure pulsation, and high self-priming ability, which cannot be replaced by other pumps. Single screw pump is widely used in petrochemical, environmental protection, exploration and mining, medicine and food, shipbuilding industry, energy industry, papermaking, construction, mining, machinery and other industries.

The electrical control cabinet of the fire pump set has the switching control mode of single pump, multiple pumps, and multiple main and standby pumps. According to the power of the pump and user requirements, the starting mode of the pump motor can be configured as direct start, star-delta start and other forms.