Reliable EDJ Fire Fighting1000GPM GPM Response

This group of fire pumps consists of two electric pumps + one jockey pump, and the motors are connected to multistage pumps.

A single-stage fire pump has only one impeller, and a multistage fire pump can have two or more impellers, which can achieve a larger lift at the same flow rate. Generally, it can be used as an industrial pump, a domestic pump and a fire pump.

The EJ (Electric pump + Jockey pump) Dual Power Fire Pump System is an innovative and reliable fire protection solution. Combining an electric pump for robust water pressure and flow with a top-quality jockey pump for stable pressure maintenance, this system ensures efficient and timely water supply during fires. With advanced automation, remote monitoring, and energy-saving features, the EJ Dual Power Fire Pump System is a trusted choice for commercial, industrial, and residential applications.

A fire pump starts when the pressure in the fire protection system drops below a set threshold, indicating water flow caused by sprinkler activation or manual use of a fire hose. The pressure drop is detected by pressure-sensing devices, triggering the fire pump to activate and provide adequate water pressure.

The so-called self-priming pump does not require irrigation before starting, and after a short period of operation, the water can be sucked up by the function of the pump itself and put into normal operation.

Self-priming pumps are divided into the following categories according to their working principles:

(1) Gas-liquid mixing type (including internal mixing type and external mixing type);

(2) Water ring wheel type;

(3) Jet type (including liquid jet and

DJ fire pump group is mainly composed of diesel engine and regulator pump, can be selected in the state of no power supply.

outdoor fire pump set which is no need to build the fire pump house, it can put outdoor directly.

Fire pump model parameters are complete, specifications are rich, affordable, with a wide range of use, corrosion resistance, stable performance and other characteristics, there are perfect after-sales service, can be customized according to demand processing.

250gpm 8bar DJ fire pump is the diesel engine pump and jockey pump, controller and pipe system on one skid, can meet the flow 250gpm @ pressure 8bar, it is Ecuador client’s order for Better Technology Group.

1. Increase the suction head: Increasing the suction head, or the vertical distance between the suction inlet and the centreline of the impeller, can reduce the chances of cavitation.

2. Increase the impeller speed: Increasing the impeller speed can also reduce the chance of cavitation.

3. Install an air separator: An air separator in the suction line can help remove any entrained air from the system, thus reducing the chance of cavitation.

4. Install a venturi: A venturi installed in the suction line can help create an area of low pressure, which can reduce the chance of cavitation.

5. Install a priming valve: A primer valve can help reduce the suction head and thus reduce the chance of cavitation.

6. Install a vacuum breaker: A vacuum breaker can be used to reduce the pressure in the suction line, thus reducing the chance of cavitation.

7. Improve the suction piping: Improving the suction piping, such as using larger pipes, can reduce the chance of cavitation.

8. Inspect the pump and suction line: Inspecting the pump and suction line for any signs of wear or damage can help reduce the chance of cavitation.

Fire pump system is made of Electric Pump + Diesel Engine Pump+Jockey Pump+Accessories

Operation: 1 Duty(electric pump ) + 1 stand by(diesel engine pump ) + 1 Jockey fire pump

Capacity: 100GPM, 150GPM, 200GPM, 300GPM, 400GPM, 500GPM, 750GPM, 1000GPM, 1250GPM…GPM with Pressure 4Bar, 5bar, 6Bar, 10Bar, 15Bar… Bar.

This series of pumps meets the requirements of fire pumps in terms of performance, structure, materials and matching. Due to the use of excellent hydraulic models, this series of pumps has the advantages of meeting user requirements, high efficiency and wide performance range, which can better save floor space; high-quality motors with high-quality bearings make the pump run more safely. Reliable, low noise, low vibration; the use of hydraulic balance axial force can make the operation more stable. The scope of application is suitable for fire water supply in various occasions such as residences, hotels, office buildings, commercial buildings, factories, hospitals, etc.

XBC diesel engine fire pump set can also be equipped with other diesel engines as power engines according to user needs. It is mainly composed of diesel engine, fire pump, connection device, fuel tank, radiator, battery pack, intelligent automatic control panel, etc. Diesel engine fire pump series products have high efficiency, long operating life and high reliability (there is no failure of pneumatic seizure after a long period of inactivity).

Factors include the building size, height, occupancy type, local fire codes, water supply source, and the required water flow and pressure. A thorough hydraulic analysis is typically performed to determine the appropriate pump size and type.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Jockey pumps should be inspected regularly, with routine checks typically performed monthly. The inspection includes checking pressure settings, verifying proper operation, and inspecting for any leaks or damage. Ensuring that the jockey pump functions correctly helps maintain system pressure and prevent unnecessary wear on the fire pump.

1. Make sure all valves are open and the system is in good working order.

2. Check the fuel filter for any debris, and replace as needed.

3. Adjust the governor control to reduce the RPM of the engine, and limit fuel consumption.

4. Regularly inspect, clean and replace the air filter to ensure maximum efficiency.

5. Maintain the fuel injection system to minimize fuel wastage.

6. Use synthetic oil instead of petroleum-based engine oil.

7. Reduce the demand on the fire pump by using water pressure regulators or other available techniques.

8. Use the most efficient fuel type for the engine.

9. Use the most efficient nozzle size for the fire pump.

10. Use a variable frequency drive to reduce the engine speed and conserve energy.

Maintenance, commissioning and after-sales service of fire pump set! which consist of electric split case fire pump, diesel engine fire pump and controller

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Fire pumps are part of the applied water supply and are powered by electricity, diesel. They activate when the pressure in the fire sprinkler system drops below a certain level and provide a flow of water to the sprinkler system at very high pressure, which is then discharged onto the fire.

At the moment when fire safety is deeply rooted in the hearts of the people, diesel engine fire pumps are gradually replacing ordinary fire pumps, especially in manufacturing enterprises, with large flow water supply systems, excellent performance, and stable operation mode, they are the fire safety experts trusted by modern enterprises. However, the more expensive and high-tech products are, the more attention they need.

We may encounter fire disasters in our lives. Once these things happen, we must take corresponding remedial measures, so fire extinguishing is an inevitable measure. At this time, fire pumps play an important role in fire extinguishing.

Yes, firefighting pumps are often used in conjunction with other fire suppression methods, such as fire extinguishers, fire sprinkler systems, and fire blankets, to provide comprehensive fire protection in various environments.

The diesel engine fire pump is suitable for unattended emergency water supply systems. The product has the characteristics of good technology, high degree of automation, superior performance, complete protection functions, reasonable structure, simple installation, and high cost performance. pipe network pressure.

Fire pumps are often required to have backup power sources, such as diesel generators or uninterruptible power supplies (UPS), to ensure they function during power outages.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar (40-300 psi)
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min
The EDJ Fire Pump Set includes diesel engine pumps, electric pumps and jockey pumps.
In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants,oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

The diesel engine fire pumps used in this series of equipment are made of domestic or imported high-quality products, which have the characteristics of good starting characteristics, strong overload capacity, compact structure, convenient maintenance, simple use, and high degree of automation. It is an advanced and reliable fire-fighting equipment.

1. Electric fire pump: various end suction pumps and split pumps.
2. jockey pump: vertical, small flow, higher lift than electric or diesel pumps.
3. Control panel: Automatically control the water pump with overload and overcurrent protection.
4. Accessories: suction pipe, discharge pipe with flange, battery, gate valve, check valve, flexible expansion joint, pressure switch, pressure gauge, base, etc

Answer: First of all, we must understand the relationship between pressure and lift: pressure = liquid density * g * lift (g = 0.981). In fact, the fire water pump can not only transport water, as long as the physical and chemical characteristics and water liquid are fine, but most of them transport water in daily life. The density of water is 1 ton per cubic meter. It can be obtained from the above formula : Pressure=1000*0.981*lift, pressure=0.981*lift, at this time the pressure and lift are almost the same, so whether we refer to lift or pressure, it can basically be regarded as a parameter.

In high-rise buildings, fire pumps and jockey pumps are critical components of the fire protection system, ensuring that water is delivered to the upper floors with sufficient pressure. Due to the height of these buildings, gravity significantly reduces water pressure as it travels upwards, making it essential for fire pumps to boost pressure to maintain effective firefighting capabilities. Jockey pumps maintain system pressure in between fire pump activations, compensating for minor leaks and ensuring the system is always primed. The design of these pumps in high-rise buildings often includes considerations for redundancy, with multiple pumps and backup power supplies to ensure continuous operation even during power outages or pump failures. This redundancy is vital in high-rise buildings, where a delay or failure in water delivery could have catastrophic consequences.