Reliable Water Pressure: The Key Features of Constant Pressure Equipment

The automatic water supply equipment automatically adjusts the number of running water pumps and the speed of a water pump according to the change of the user’s water consumption, so that the outlet pressure of the water pump remains constant.

. The rotor part is composed of shaft, impeller, impeller retaining sleeve, shaft sleeve and other parts, and the water inlet section, middle section and water outlet section are connected by tension bolts. The shaft seal adopts a mechanical seal, lubricated and cooled by the pressure water in the balance chamber.

Fire pump fuel tanks should be inspected and maintained regularly according to relevant regulations and manufacturer recommendations. Typically, this includes periodic checks for leaks, corrosion, proper fuel levels, and the condition of associated components such as vents, gauges, and fuel lines.

The waste cone is providing quick visual confirmation of proper water flow in the fire pump system.

The pump is a single stage single suction vertical centrifugal pump, the main components are volute, impeller, pump seat, pump shell, support cylinder, motor seat, motor and other components. Volute, pump seat, motor seat, impeller nut is cast iron, corrosion resistance, corrosion resistance is good, convenient processing technology.

It is composed of pressure water tank, control cabinet, top pressure gas storage system, decompression release device and other basic components; In the condition of fire fighting, the compressed gas is filled into the pressure water tank to replace the fire fighting water in the tank, and always maintain the rated working pressure of fire fighting, and the fixed fire water supply equipment for the fire fighting pipe network.

These pictures show electric motors of different powers. We can produce many kinds of motors to meet the different needs of customers.

Foam tank systems typically include the foam tank itself, foam concentrate, foam proportioning equipment, pumps, piping, and discharge devices such as foam nozzles or monitors.

The housing of the diesel engine fire pump constitutes the working chamber of the pump. The impeller, shaft and rolling bearing are the rotors of the pump. Suspension bearing parts The supporting parts support the rotor parts of the pump, and the rolling bearings are subjected to the radial and axial forces of the pump. In order to balance the axial force of the diesel engine fire pump, most pumps have sealing rings at the front and rear of the impeller, and a balance hole on the back cover of the impeller. Because some pumps have little axial force, there is no seal on the back of the impeller. ring and balance hole. The axial sealing ring of the diesel engine fire pump is composed of packing gland, packing ring and packing to prevent air intake or large water leakage.

These photos show some of the motors used in exhibitions. Our company’s ordinary motor products include Low voltage motor, Low-voltage variable frequency speed control motor, Compact low voltage high power motor, High voltage motor, High voltage motor, High voltage compact motor, Low-voltage flameproof motor, Low-voltage flameproof type variable frequency speed regulating motor, Low-pressure dust explosion-proof motor.

IS end suction pump, export to Bangladesh. use for CHILLER PLANT EQUIPMENT

Volume:500-2000L

Hygienic and clean to use, high efficiency, low noise, mild corrosion resistance and compact structure, beautiful appearance, small size, light weight, convenient use and maintenance, reliable sealing performance

Integrated Prefabricated Pump Station

The pump station is supplied as an integrated unit. It includes a pump station cylinder, pressure pipeline, maintenance platform, maintenance ladder, grill filter, coupling system, pump lifting system, ventilation, anti-skid manhole cover, lighting system, etc.

According to CFO fluid dynamics finite element analysis, the base structure is optimized to prevent sludge deposition in sewage treatment and no odor residue.

All internal installation and commissioning work is completed in the factory. The pump station is only installed on the site, which greatly reduces the civil construction period and engineering cost, and reduces the overall investment of the owner.

The pumping station cylinder is made of FRP, and the internal fittings are made of anti-corrosion materials such as SUS304 and hot-dip galvanizing. No maintenance is required, and the normal service life can reach more than seven years.

Intelligent operating system, easy to understand, to run, monitoring without personnel supervision

Welcome your inquiry!

Self priming pump diesel engine driven works for water or medium similar to water that viscosity below 5°E and temperature below 80°C(176°F). It is compact, easy to operate, running stable, easy to maintain, efficient, with long service life and large suction capacity.

For end suction pumps and since water is entering one side of the impeller, and due to the design of “Impeller overhung”, these pumps cannot be used for large water flow applications and usually not exceeding 1500 gpm of flow.

Regular maintenance of foam tanks is essential to ensure their proper functioning during emergencies. This includes inspecting for leaks, checking foam concentrate levels, testing proportioning equipment, and conducting periodic foam quality tests.

The YE2 series three-phase induction motor is inline with IE3 effieiency standard in the provisions of IEC60034-30-2008. And
the improvement of the efficiency in its design is in line with the state’s requirements on the energy saving and consumption
reducing of the manufacturing sector.
YE2  series motors with the mounting dimension in accordance with standard IEC60034,1t has good features like optimum
structure, attractive appearance, low noise, high efficiency, high protection class as well as high insulation class. YE2 series motors
can be widely used in various kinds of general use machineries like fans, pumps, machin tools, compressors, transportation and
so on, and can also be used in the hazardous areas with oil and chemical, steel plants, mining industry

Suitable for use with clean water. For Fire hydrant water supply, sprinkler system, fire system voltage regulator.

Submersible sewage pump is suitable for conveying sewage and dirt with particles in chemical industry, petroleum industry, pharmaceutical industry, mining industry, paper industry, cement plant, steel plant, power plant, coal processing industry, urban sewage treatment plant drainage system, municipal engineering, construction site and other industries. It can also be used for pumping clean water and corrosive media.

1、 Star delta startup mode
2、 Auto coupling step-down startup mode
3、 Soft start mode
4、 Direct start mode

As the name implies, the fire pump is divided into different types according to different classification methods. It has the characteristics of full sealing, no leakage and corrosion resistance. It is widely used in environmental protection, water treatment, fire protection and other departments to pump various liquids. , It is an ideal pump for creating a leak-free, pollution-free civilized workshop and civilized factory. The pump type is similar to that of the fire protection system, but the lift and flow are different.

Sewage pump is a pump and motor connected, and at the same time into the liquid work pump products, compared with the general horizontal pump or vertical sewage pump, sewage pump compact structure, small footprint. Easy installation and maintenance, large sewage pumps are generally equipped with automatic coupling device can be automatically installed, installation and maintenance is quite convenient. Long continuous operation time.

The pump shell has two types of axial and radial sections. The shell of most single stage pump is volute type, the radial division shell of multistage pump is generally annular shell or circular shell.

The constant pressure variable frequency water supply equipment is an advanced system designed to maintain stable water pressure while ensuring energy-efficient water supply. It utilizes variable frequency technology and an intelligent control system to dynamically adjust pump speed and water pressure based on real-time water demand. This eliminates energy wastage caused by frequent start-stop cycles in traditional systems, providing users with a constant water pressure supply for stable and reliable water distribution during peak and off-peak periods. The equipment’s intelligent control system enables remote monitoring and automatic alarms, improving operational reliability and maintenance efficiency. Widely applied in industrial, construction, agricultural, and municipal sectors, this energy-efficient solution optimizes water supply systems to meet diverse user demands effectively.

Foam proportioning systems enhance the fire suppression capabilities of water, reduce the amount of water needed, minimize water damage, and can effectively smother fires by cutting off the oxygen supply.

Small frequency conversion water supply equipment is a kind of equipment developed under the support of frequency conversion speed regulation system and frequency conversion technology. Its application in water supply equipment management shows good economy and environmental protection. Life and production play a very important role.

The sewage lifting device is a system composed of a sewage pump, a water collecting tank, a control device, and related pipe fittings and valves, which is used to lift and transport waste water below the sewers or away from the municipal pipe network. It can effectively solve or avoid the problems existing in the traditional sump.

The fire control cabinet is mainly used to control the important executive device of the fire pump. The fire hydrant pump control cabinet and the fire sprinkler control cabinet are collectively called the fire control cabinet. When the fire hydrant pump (spray pump) control cabinet receives the fire hydrant signal, it will press Indicates to start or stop the fire water pump.

ZX self priming pump diesel engine driven works for water or medium similar to water that viscosity below 5°E and temperature below 80°C(176°F). It is compact, easy to operate, running stable, easy to maintain, efficient, with long service life and large suction capacity.