Self-converted complete set of fire pump equipment

Diesel-driven fire pumps provide a reliable alternative to electric-driven pumps, especially in areas prone to power outages. They offer independent operation without relying on the building’s electrical supply and are often used in remote locations or where backup power is essential.

The EE Pump Set is designed according to the customer’s specifications which is including 2 electric pumps and 1 control panel.

All places need to be equipped with fire-fighting facilities, and fire pumps are necessary water intake equipment for fire-fighting facilities. At least one or two fire pumps are equipped. Our commonly used fire pumps are electric fire pumps and diesel engine fire pumps. The difference between the two is The electric fire pump needs to be supplied by the power system. If the power is cut off, the diesel engine fire pump can be started at any time to make up for the original electric fire pump.

Fire pumps are mainly used for pressurized water delivery in firefighting system pipelines, and can also be used in industrial and urban water supply and drainage, high-rise building depressurized water delivery, long-distance water delivery, heating, bathroom, boiler cold and warm water circulation pressurized air conditioning refrigeration system water delivery and equipment matching, etc.

Signs include unusual noises or vibrations, reduced water pressure or flow, frequent tripping of the pump, leakage, and failure to start. Regular inspections and testing can help identify issues before they become critical.

Flow:5-400L/s
Head:3-20Bar
Material:HT200, SS304, Bronze
Caliber:65-350mm
Pressure:0.3~1.5MPa
Speed:740-2900r/min

Fire pumps are primarily designed for structural fire protection, and their use in wildfire prevention is limited. However, water pumps and other firefighting equipment may be employed for vegetation fire control in specific situations.

This is a set of EDJ fire pump set, which consists of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

Small flow fire pump assemble process
This is for Philippines order for us, and flow as 50gpm 6bar
Normal use for small shop and hotel project

Firefighting pumps are often integrated with other firefighting equipment and systems, such as fire hoses, fire hydrants, sprinkler systems, and fire suppression systems. This integration ensures a coordinated and comprehensive approach to fire protection and emergency response, enabling firefighters to work together seamlessly to combat fires and protect communities.

The EDJ fire pump unit consists of a fire pump, a double-shaft motor and a diesel engine. One end of the output shaft of the double-shaft motor is connected to the input shaft of the fire pump, and the other end of the output shaft of the double-shaft motor is connected to the One end of a clutch is connected, and the other end of the clutch is connected with the output shaft of the diesel engine. The fire water pump, the double-shaft extension motor, the clutch and the diesel engine are all fixed on the base. The double shaft extension motor, the clutch and the diesel engine are respectively electrically connected with a control circuit through an action driving circuit. With dual-power fire pumps, there is no need to configure a second fire pump, which reduces floor space and saves manufacturing costs.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

The fire pump set is a customized 100gpm EDJ fire pump, which is composed of electric pump + diesel pump + jockey pump. It is a standard fire pump set, which is easy to install the fire pump set on site; easy to debug; Wiring electrical connections; less space requirements; all (pump, drive and controller) on one base, etc.

Diesel fire pump is suitable for discharging seriously polluted industrial wastewater, sewage discharge station in main residential area, water distribution system of urban sewage treatment plant, drainage station of civil air defense system, water supply equipment of waterworks, sewage discharge of hospitals and hotels, municipal engineering construction site, mine auxiliary machinery , rural biogas digesters, farmland irrigation and other industries. Sewage and dirt from conveyor belt particles can also be used for clean water and weakly corrosive media.

The EEJ Fire Pump System is an innovative solution designed to enhance fire safety in various settings. With exceptional performance and efficiency, the EEJ Fire Pump System delivers high pressure and large flow capacity, enabling rapid and effective fire suppression. Its intelligent features, including real-time monitoring and remote control capabilities, contribute to the system’s reliability and ease of operation. Overall, the EEJ Fire Pump System is a reliable choice for safeguarding lives and properties, making it an ideal fire protection solution for commercial buildings, industrial facilities, and residential areas.

1. Check the system pressure and increase if necessary.
2. Check the seals and gaskets for wear and replace if needed.
3. Check the pipe joints for any leakage and repair if needed.
4. Replace any worn or damaged parts.
5. Check the valves for any leakage and repair if needed.
6. Check the suction and discharge lines for any obstruction and clear if necessary.
7. Inspect the pump for any signs of corrosion and repair or replace if needed.
8. Check and adjust the pressure settings if needed.
9. Perform regular maintenance and service of the pump.

Fire Pump Packages
Fire pump package comprises a combination of electric motor driven pump, diesel engine driven and electric motor driven jockey pumps that supply for fire suppression systems.
Fire pump package is required to comply with Local Civil Defense Authority regulations and International Codes of Practice e.g. National Fire Protection Association (NFPA).

Types of pumps used for fire service include: end suction, horizontal split case, vertical split case, vertical inline and vertical turbines.

The product is EJ fire pump set. The EJ fire pump set has one electric pump and one jockey pump. The electric pump in the picture is XA pump. XA series horizontal single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly horizontal centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps.

– Handling of Flammable Materials: Ensuring systems are designed to handle and suppress fires involving highly flammable substances.
– Explosion-Proof Components: Using explosion-proof components to prevent ignition in volatile environments.
– High Capacity and Redundancy: Implementing high-capacity and redundant systems to ensure continuous operation.
– Compliance with Oil and Gas Safety Regulations: Adhering to stringent fire safety regulations specific to the oil and gas industry.

The EE Pump Set is designed according to the customer’s specifications which is including 2 electric pumps and 1 control panel.

Functional description of fire pump control system, which is composed of electric motor fire pump, diesel engine fire pump, common chassis, water outlet pipeline and various valves. The operation of the unit is operated by hand. The diesel engine fire pump is equipped with a fuel tank with a running capacity of 6 hours. The electric fire pump set has a starter cabinet and a manual button box, which is convenient and feasible to operate. In addition to the entire structure of the manual control unit, the automatic motor fire pump unit and diesel engine fire pump unit also have an automatic control panel mainly composed of PLC. Automatic control panel function The automatic control panel receives the fire alarm signal.

The fire booster pump is designed to increase the flow and pressure rate of the water supply coming into the fire system. This is accomplished by drawing water from a municipality main, tank, or hydrant, and then boosting the pressure rate of the water supply with an electric motor and pump. The adjusting of the pressure rate is accomplished by changing the speed of the electric motor that is powering the pump, which in turn changes the amount of water being pushed through the system.

The motor fire pump set is a fire pump powered by an electric motor, and generally consists of a group of fire pumps, motors, control cabinets and auxiliary devices. Because the electric motor fire pump set is composed of these parts, it forms a powerful fire protection and power effect, and provides a strong water source support for various fire hydrant systems and sprinkler systems in the building.

The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump set are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water pipe, etc. The specific fire pump model is determined according to the environment and performance requirements. At the same time According to the material quotation required by the customer, accurate selection is conducive to on-site use and reduces failure problems.

ED small fire fighting water supply equipment is used in hotels, shops, stores, warehouses, workshops, residential and other places with high fire protection requirements.

Common Causes of Fire Pump Motor Failures:

Electrical Issues: Faulty wiring or power supply problems can lead to motor failure.
Overheating: Insufficient cooling or blocked ventilation can cause overheating.
Mechanical Failure: Worn bearings or misalignment can result in motor damage.
Lack of Maintenance: Neglecting routine maintenance can lead to premature failures.
Corrosion: Exposure to moisture and chemicals can damage components.

EJ fire pump set is a fire water supply equipment composed of an electric pump and a jockey pump designed and manufactured by Better Technology Co., Ltd. according to the <> standard, and has obtained 3CF certification. There are many models of Better dual-power fire pumps, which can be customized according to needs.

With the characteristics of full sealing, no leakage and corrosion resistance, fire pumps are widely used in environmental protection, water treatment, fire protection and other departments. They are ideal pumps for building non-leakage, non-pollution civilized workshops and civilized factories. Our commonly used fire pumps are electric fire pumps and diesel engine fire pumps. The difference between the two is that the electric fire pump needs power system supply. If the power is cut off, the diesel engine fire pump can be started at any time to make up for the original position of the electric fire pump.

The standard complete set of fire pump is manufactured with good structure and craftsmanship, which has a wide range of performance, and is easy to use and operate for a long time. Standard complete sets of fire pumps are aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.

1.Flow: 50-5000GPM
2.Head: 3-20Bar
3.Speed: 740-2900r/min
4.Power: Electric pump: 1.5-710 kw, Jockey pump: 0.55-160kw
The EEJ Fire Pump System is an innovative solution designed to enhance fire safety in various settings. With exceptional performance and efficiency, the EEJ Fire Pump System delivers high pressure and large flow capacity, enabling rapid and effective fire suppression.Overall, the EEJ Fire Pump System is a reliable choice for safeguarding lives and properties, making it an ideal fire protection solution for commercial buildings, industrial facilities, and residential areas.