Split Case Pumps: Powering Industrial Fluid Processes

Vertical turbine pumps are mainly used to transport clean water and sewage containing certain solid particles, corrosive industrial wastewater and seawater. Widely used in raw water treatment plants, sewage treatment plants, metallurgical steel industry, power plants, mines, municipal engineering and farmland water conservancy projects.

Flow：250-10000 GPM
Head：30-160 m 3-16 Bar
The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.

Maintenance schedules are critical for the longevity and reliability of the pump:

Weekly: Perform visual inspections and check for any obvious signs of wear or damage.
Monthly: Conduct operational tests to ensure the pump starts and runs correctly.
Annually: Perform comprehensive performance tests, including a full-flow test to verify the pump meets the designed flow and pressure requirements.

The vertical turbine pump is a vertical pump composed of single or multiple centrifugal or mixed flow impellers and guide casings, lift pipes, drive shafts, pump bases, motors and other components. The pump base and motor are located on the upper part of the wellhead (or pool), and the power of the motor is transmitted to the impeller shaft through the transmission shaft concentric with the lift pipe, which drives the impeller to generate flow and lift.

Key installation requirements include:

A stable and reliable power source, often with a backup generator.
Proper sizing based on the building’s fire protection needs.
Adequate ventilation and cooling in the pump room to prevent overheating.
Installation of controllers and alarms to monitor pump status.
Compliance with local fire codes and standards such as NFPA 20.

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105C。
Series OTS pumps are available for capacities Of 68-18000m3/hr and heads of 70-200m.They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

The OTS Double-suction Split-case centrifugal pump is a widely used centrifugal pump in industrial and water supply systems. It features a double-suction design with two suction inlets on either side of the pump. This pump offers high efficiency, stability, and reliability due to its rational design and advanced fluid dynamics principles. It can handle large flow rates and high heads, making it suitable for various applications. The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.

The name of the fire pump is the name of the fire pump. The pump used on fire protection. The fire pump is introduced to foreign products. According to different classification methods, it is divided into different types. It is widely used in environmental protection, water treatment, fire protection, etc. The department is used to pump all kinds of liquids. It is an ideal pump and fire system for creating non -leakage and pollution -free civilized workshops and civilized factories. The pump types are similar, but the raising and traffic are different. The selection basis for the fire pump should be considered according to the process of process and water drainage requirements.

Pump flow:200≤Q≤5000GPM
Head:70＜H≤150m
Speed:1500-3550 rpm
Frequency50 Hz or 60 Hz

Electric fire pumps are used in diverse settings, including but not limited to commercial properties, industrial plants, warehouses, residential buildings, educational institutions, healthcare facilities, and public infrastructure like airports and stadiums.

The XBD-DL vertical multistage fire pump is a top-tier technology designed to enhance the safety and efficiency of building fire protection systems. With advanced design and technology, this pump offers excellent corrosion resistance and durability, making it suitable for various environmental conditions. Its high-performance turbine blade design and efficient motor ensure powerful water pressure and flow, enabling rapid and effective water delivery. The intelligent monitoring system and fault alarm function enhance the pump’s reliability and availability. By choosing the XBD-DL vertical multistage fire pump, you gain an innovative and efficient solution to enhance the safety and efficiency of your fire protection system.

ISO series centrifugal pump is a single-stage single-suction centrifugal pump developed by China Better Technology Co., Ltd. with reference to international similar products using modern fluid mechanics to meet the international standard ISO9908 secondary energy efficiency standard.

This product combines the strengths of similar products in China and abroad and is designed with excellent hydraulic models, therefore, its excellent hydraulic performance and structural features ensure that the user can effectively reduce the operating cost of the pump in various applications.

Features:
1. The pump is a vertical structure, the inlet and outlet diameters are the same, and are located on the same center line. It can be installed in the pipeline like a valve. The appearance is compact and beautiful, the floor space is small, and the construction investment is low. Can be used outdoors.
2. The impeller is directly installed on the elongated shaft of the motor, the axial dimension is short, the structure is compact, and the pump and motor bearings are reasonably arranged, which can effectively balance the radial and axial loads generated by the operation of the pump, thereby ensuring the smooth operation of the pump. Low vibration and low noise.
3. The shaft seal adopts mechanical seal or mechanical seal combination, adopts imported titanium alloy sealing ring, medium-sized high temperature resistant mechanical seal and hard alloy material, wear-resistant seal, which can effectively prolong the service life of mechanical seal.
4. Easy installation and maintenance, no need to dismantle the pipeline system, just remove the pump joint seat nut to extract all the rotor parts.
5. The series and parallel operation modes of pumps can be adopted according to the requirements of use, that is, the needs of flow and head.
6. The vertical and horizontal installation of the pump can be adopted according to the requirements of the pipeline arrangement

Flow：250-10000 GPM
Head：3-16 Bar
In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants, oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

Multistage pumps are used for feeding low and middle pressure boiler water or for pumping other middle pressure water. The temperature of pumped medium are not more than 110℃.
This pumps are horizontal single-suction centrifugal pump with ring section body. The position of suction port is arranged horizontal and is vertically up.
The position of discharge port is arranged vertically up.
The shaft sealing of these pumps are sealed with soft-packing. At the location of the shaft sealing, there is a renewable sleeve to protect the shaft.
The pumps are directly driven by the motor through the flexible coupling.
The rotating directions of the pumps are clockwise, when viewed pump from the driving end.

Capacity: Q = 5~1800m3/h
Total head: H = 20~234m
Speed: n = 2940~980 r/min

The single-stage double suction centrifugal pump is a new type of energy-saving horizontal split pump, which is used to transport clean water or other liquids with physical and chemical properties similar to water. According to the user’s demand, the pump can be used to transport muddy sand water or various corrosive liquids by changing the pump structure and material. This series of pumps are suitable for factories, mines, urban water supply and drainage, power stations, household irrigation and drainage and various water conservancy projects.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, the impeller, the pump shaft, the bearing, the coupling, the sealing form, the lifting pipe, etc. The specific fire pump model is determined according to the environment and performance requirements. According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces. They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.

3 sets electric pump product process
It is XA model, and suitable for high flow and pressure
This model is 350gpm 120 psi

Flow: 1~300L/s
Head:15~160m
Speed: 960~2900rpm

Horizontal fire pumps have significant advantages such as high efficiency, low operating noise, good anti-cavitation performance, reasonable structure, and long service life. , Long-distance water delivery, heating, bathroom, boiler cold and warm water cycle pressurization, air conditioning and refrigeration system water delivery and equipment matching and other occasions.

Ensure optimal performance and reliability of your fire protection system with our premium Jockey Pumps. Designed for maintaining constant pressure in fire sprinkler networks, our Jockey Pumps offer dependable pressure control, enhancing fire safety measures in commercial and industrial settings. Trust in our high-quality Jockey Pumps to safeguard your property and personnel against fire hazards effectively.

Flow：50-5000 GPM
Head：3-16 Bar (40-232 psi )
Power：11-1000 kw
Frequency：50 or 60 Hz
ISO end-suction pumps find wide application in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants, oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

End suction centrifugal pump is a kind of centrifugal pump. Same name: end suction pump
The back-pull structure allows the impeller, main shaft and bearings to be installed and replaced without removing the pump casing. The robust structure minimizes misalignment and deformation of the water pipes.

The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. The long shaft pump provides flexibility through customization options and multiple driving choices. It is a reliable solution for water supply, sewage treatment, and chemical processes. Choose the long shaft pump for reliable and efficient fluid handling in your engineering projects.

Flow：50-5000 GPM
Head：3-16 Bar
ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others.

Flow：250-10000 GPM
Head：30-160 m 3-16 Bar 40-232 psi
Power：11-1000 kw
Caliber：25-500 mm
Frequency：50 or 60 Hz
Working Pressure：≤2.5 MPa
The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.

D-type horizontal, single-suction multi-stage, segmented centrifugal pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. For conveying clean water or other liquids with physical and chemical properties similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump flow parts, the sealing form and increasing the cooling system

Proper maintenance of an electric fire pump is essential to ensure its reliable performance during emergencies. Regular maintenance helps identify and address potential issues before they escalate into major problems. Here are some general steps to maintain an electric fire pump: