electric fire fighting pump

●Power:15-430HP
●Speed: 1500rpm 1800rpm 2900rpm 3500rpm
●Frequency: 50Hz&60Hz
●Rated voltage: 380V/400V/415V

15HP-400HP

The vertical hollow shaft motor, as a motor designed for vertical turbine fire pump systems. This motor plays a critical role in the field of firefighting by driving water pumps to provide sufficient water pressure and flow for effective fire extinguishing and fire control. These motors ensure continuous operation during emergencies, offering essential water supply support for firefighting emergencies.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Flow:13-1300 GPM
Pressure:2-20 BAR (30-290 PSI)
Jockey pumps are essential devices used to maintain stable pressure within systems, commonly applied in fire protection, water supply, and industrial processes. They automatically adjust pressure as demand changes, ensuring efficient system operation.

Flow：50-5000 GPM
Head： 3-16 Bar / 40-232 psi
Power：11-1000 kw
Frequency：50 or 60 Hz

·UL Standard:
Flow:50-500GPM
Head:6-16 Bar（90-230PSI）
·Non-UL Standard:
Flow：50-5000 GPM
Head：3-16 Bar（40-232 psi）

The IS series single-stage centrifugal pump is a reliable and versatile solution for fluid transfer applications. Known for its simplicity and ease of use, this horizontal centrifugal pump is designed to efficiently transport clear water and fluids with similar properties. W

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

– Handling of Hazardous Materials: Ensuring systems are designed to handle and suppress fires involving hazardous waste.
– Explosion-Proof Design: Using explosion-proof components to prevent ignition in volatile environments.
– Specialized Fire Suppression Methods: Implementing fire suppression methods tailored to hazardous waste fire hazards.
– Compliance with Hazardous Waste Safety Regulations: Adhering to fire safety regulations specific to hazardous waste management.

·UL Standard
Flow：100-2500 GPM
Head：90-250 PSI
·NON-UL Standard
Flow：250-10000 GPM
Head：30-200 m / 3-20 Bar / 40-290 psi

Energy efficiency can be improved by:

Using variable frequency drives (VFDs): These allow the pump to operate at optimal speeds, reducing energy consumption.
Regular maintenance: Ensuring all components are in good working condition to avoid unnecessary energy usage.
System design: Optimizing the layout and components of the fire protection system to minimize energy loss.

If an electric fire pump fails during an emergency, the following steps should be taken:

Activate the backup pump: If available, switch to a secondary pump or manual firefighting methods.
Investigate the cause of failure: After the emergency, perform a thorough inspection to determine the cause of the failure.
Repair or replace the pump: Address the identified issues and restore the pump to full operational status.
Review maintenance practices: Ensure regular testing and maintenance procedures are followed to prevent future failures.

Yes, electric fire pumps can be used in various types of buildings, including residential, commercial, industrial, and institutional structures. The key is to ensure the pump system is appropriately sized and configured to meet the specific fire protection requirements of the building.

Testing an electric fire pump involves several steps:

Weekly or monthly churn tests: Run the pump without flowing water to check its operational status.
Annual flow tests: Perform a full flow test to ensure the pump meets the required performance criteria. This includes measuring the flow rate and pressure at various points and comparing them to the pump’s rated capacity.
Performance data recording: Document all test results and compare them against previous data to identify any performance changes.

When choosing an electric fire pump, consider the following factors:

The required water flow rate and pressure.
The availability and reliability of the power supply.
Compliance with local fire codes and standards.
The reputation and reliability of the manufacturer.
The availability of service and support.

Benefits include:

Sustainability: Reduce the environmental impact by using renewable energy sources such as solar or wind power.
Energy Security: Enhance energy security by reducing dependence on grid power and fossil fuels.
Cost Savings: Lower operating costs over time by utilizing free or low-cost renewable energy.
Resilience: Improve system resilience by incorporating renewable energy sources with battery storage, providing reliable power during outages.

– Jockey pumps in large-scale facilities:

Pressure Maintenance: Keep the fire protection system pressurized to prevent false alarms and ensure immediate response during a fire event.
Leak Compensation: Compensate for minor leaks in the system, maintaining steady pressure without activating the main fire pump.
System Readiness: Ensure the system is always ready for immediate use by maintaining constant pressure levels.

Non-UL Flow：30-9000 GPM
Non-UL Head： 3-20 Bar (40-300 psi)
UL Flow：50-3000 GPM
UL Head： 5-20 Bar (72.5-290 psi)

The size and capacity are determined by factors such as the building’s fire protection needs, the height and area to be covered, water supply requirements, and local fire codes.

In case of failure, immediately notify the fire department and attempt to use backup fire protection systems if available. Regular testing and maintenance can help prevent failures during emergencies.

Consult with a fire protection engineer or specialist to evaluate your building’s specific needs, ensuring the selected pump meets all regulatory and operational requirements.