fire pump electric

Fire pump refers to a clean water pump used for fire water supply, and a single water pump with a non-corrosive treatment medium temperature below 80°C. The pump unit is a joint operation of multiple fire pumps to ensure the quantity and stability of water supply. The electric motor fire pump set adopts multiple fire water pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption.

Electric fire pumps are pumps used to pump clean water and liquids with physical and chemical properties similar to water. They are mainly used in factories, mines, urban water supply, air conditioning systems, fire protection systems and agricultural irrigation. For pumps of the same specification, changing the outer diameter of the impeller can have different performance. The pump has simple structure, reliable performance, small volume, high suction lift, low energy consumption and easy maintenance.

The pumps used in firefighting are divided into different types according to different classification methods. With its fully sealed and non-leakage characteristics, it is used in environmental protection, water treatment, fire-fighting and other departments to pump various liquids. It is a non-leakage, civilized The ideal pumps for workshops and civilized factories are similar to the types of pumps for fire protection systems, but the head and flow are different.

Compared with domestic water pumps and production water pumps, fire pumps should have higher performance requirements. Most single-stage fire pumps provided by fire water sources require fire pumps to be pressurized to meet the water pressure and water volume requirements during fire fighting. The failure of the water pump due to improper setting and maintenance will inevitably affect fire fighting and rescue, causing unnecessary losses.

Horizontal fire pumps have significant advantages such as high efficiency, low operating noise, good anti-cavitation performance, reasonable structure, and long service life. , Long-distance water delivery, heating, bathroom, boiler cold and warm water cycle pressurization, air conditioning and refrigeration system water delivery and equipment matching and other occasions.

The fire pump is known to be used in fire -fighting pumps. It is widely used in environmental protection, water treatment, fire protection and other departments. It is used to pump all kinds of liquids. Fire prevention system. The performance and technical conditions of the fire pump meet the requirements of the “Fire Pump Performance and Test Method” standard.

Diesel engine fire pump is also called “engineering diesel engine fire pump set”. The diesel engine fire pump set has the characteristics of good starting characteristics, strong overload capacity, compact and reasonable structure, convenient maintenance, simple and reliable use, etc. The unit is equipped with protection functions such as overspeed, low oil pressure, three start failures, high water temperature, low oil level, and low battery voltage. It can completely meet the fire water supply in various occasions of warehouses, docks, airports, petrochemicals, power plants, liquefied gas stations, textiles and other industrial and mining enterprises.

The diesel engine fire pump set has the characteristics of high degree of automation, superior performance, complete protection functions, reasonable structure, simple installation, and high cost performance. When the factory suddenly fails, the diesel engine emergency water supply pump set will automatically start to supplement the pressure of the pipe network.

The electric motor fire pump is an important water supply equipment in the fire protection system. The electric motor fire pump has a wide range of head, flow and power, and can be used in many environments. Providing sufficient water supply is the key to ensure emergency use.

There are still many advantages of horizontal fire pumps. The single-stage single-suction horizontal fire pump has a beautiful appearance, a relatively compact structure, relatively stable operation, relatively high concentricity of components, low noise, and is more convenient for maintenance and disassembly. There is no need to disassemble the pipe.

Fire pump refers to a clean water pump used for fire water supply, and a single water pump with a treatment medium temperature lower than 80 degrees and non-corrosive. The pump unit is a joint operation of multiple fire pumps to ensure the quantity and stability of water supply. The electric motor fire pump set adopts multiple fire water pumps powered by electric motors.

The diesel engine fire pump set has the characteristics of good starting performance, strong overload capacity, compact and reasonable structure, convenient maintenance, simple and reliable operation, etc. The unit is equipped with first-level protection functions for overspeed, low oil pressure, three engine failures, high water temperature, low oil level, and low battery voltage. At the same time, the fire pump can be connected with the customer’s automatic fire alarm device or the centralized control cabinet of the fire protection system, and the characteristics of the diesel engine fire pump group can realize the function of remote monitoring.

The fire pumps used in the complete set of diesel engine fire pumps can be the IS series single-stage type, the S series new single-stage two-stage type, and the D-type series segmental multi-stage type produced by our company. The diesel engine water pumps used in this series of equipment are made of domestic or imported high-quality products. They have the characteristics of good starting characteristics, strong overload capacity, compact structure, convenient maintenance, simple use, and high degree of automation. They are advanced and reliable fire-fighting equipment.

As the name suggests, fire pumps are used in fire fighting, and they are divided into different types according to different classification methods. Due to their characteristics of full sealing, no leakage, and corrosion resistance, they are widely used in environmental protection, water treatment, tdaf001 Tiandun fire protection and other departments. Pumping various liquids is an ideal pumping and fire-fighting system for creating leak-free, pollution-free civilized workshops and civilized factories. The pump types are similar, but the head and flow are different. The selection basis of the fire pump should be considered from five aspects according to the process flow and water supply and drainage requirements. The performance and technical conditions of the fire pump meet the requirements of the “Fire Pump Performance and Test Methods” standard.

Diesel engine fire pump is a kind of mechatronics equipment that is directly driven by diesel engine fire pump and can start and complete water supply in a short time. Diesel engine pump set is driven by diesel, no external power supply is required. Diesel engine pump is suitable for agricultural irrigation, emergency rescue, smelting, hangar, petrochemical oil depot, power plant, liquefied gas station, textile and other fire-fighting water supply occasions, especially in the absence of electricity, When the power grid is not satisfied, it is the safest choice to use a diesel engine to drive the water pump.

The EJ model is basically a combination of an electric drive and a jockey pump. They consist primarily of an end suction pump driven by an electric motor, with no backup pump. It is also combined with a jockey pump for maintenance to form a complete skid.

The complete EJ-style skid is assembled with all discharge line accessories and connected to the skid-mounted control panel.

The diesel engine fire pump has automatic, manual and fault self-checking functions. It can monitor the working state of the whole process, restore the function of failure start, automatic pre-lubrication and automatic restart of preheating, so that the equipment start-up is safer and more reliable. It has the functions of central control room remote control, remote control and field bus connection. The battery is fully automatic floating charge (constant current, constant voltage, trickle charge) mode to ensure that the battery is in a standby state at any time. Diesel engine fire pump is easy to use, equipped with remote instrument and instrument, which can be connected to the control center as needed, easy to install and use, and easy to maintain.

Diesel engine fire pump is mainly composed of diesel engine, fire pump, coupling, fuel tank, radiator, battery pack, intelligent automatic control panel, etc. The company’s products are designed and optimized by computer. Our company has strong technical force, rich production experience and perfect testing methods to ensure the stability and reliability of product quality. The diesel engine fire pump adopts international advanced technology, sliding bearing, plate-fin air cooler, upper heat exchanger, spin-on oil filter and dual cooling system. The smoke and noise indicators reach the national high-quality product, and the fuel consumption is lower than the national standard high-quality product of 2.1g/kW.h.

Electric motor fire pumps are used in various water environments, not only for ordinary water supply but also as a good helper for fire water. The electric motor fire pump is manufactured with good structure and technology, with a wide range of performance, simple operation and long-term use. The electric motor fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.

The end suction pump works by rotating the impeller to make the water centrifugally move. Before starting the centrifugal pump, it is necessary to fill the pump casing and the suction pipe with water, and then start the motor to make the pump shaft drive the impeller and the water to rotate at a high speed. It flows into the pressurized water pipeline of the single-suction pump. According to the material type and the different configurations of the sealing system and cooling system, the single-stage single-suction pump has a wide range of applications. The end suction pump can pump clear water media, and can be used in air conditioning, heating, pressurization, building water supply, fire protection buildings, etc. It can pump chemical media similar to water and other corrosive liquid media, and can be used in chemical, horizontal, pharmaceutical, metallurgy, petroleum and other fields.

Electric motor fire pumps are used in various water environments, not only for ordinary water supply but also as a good helper for fire water. The electric motor fire pump is manufactured with good structure and technology, with a wide range of performance, simple operation and long-term use. The electric motor fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.

CDL stainless steel vertical multistage pump is especially suitable for boiler feed water, and can also be widely used in pressure vessel water supply, hot water circulation, high-rise building water supply, farmland irrigation, fire pressurization, hydraulic flushing, food, brewing, medicine, chemical industry, aquaculture , environmental protection, chemical process and machine tool supporting industries, as the power equipment for water supply and drainage.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water lift pipe, etc. The specific fire pump model is determined according to the environment and performance requirements, and at the same time According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

EDJ Fire pump set consists of a main electric pump(driven by electric motor), standby diesel pump(driven by diesel engine), and a multistage jockey pump. Pumps are assembled with discharge pipe and suction pipe as well as Control Panel.And this fire pump system can be customized for different purposes such as high rise buildings, warehouses,facilities,hospitals, supermarkets,shopping malls,villas,apartments,etc.

The small CDL package is designed to have water supply function. 2 CDL pumps with pressure tank and controller and accessories with strong base on skid.

Electric fire pump with jockey pump. 300gpm,8bar

NL sewage mud pump
Max flow :180m³/h
Max head：16m

XA series single-stage centrifugal pump is the earliest single-stage single-suction centrifugal pump product launched by Better (China)Technology Co., Ltd. This product combines the advantages of similar products in China and abroad, and is designed with excellent hydraulic model. Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operation cost of pumps in various applications.

It’s a customized EJ fire pump set consisting of electric pump, jockey pump along with control panel, and accessories. It is equipped with priming tank for doing negative suction.

CDL/CDLF is a kind of vertical non-self priming multistage centrifugal pump, which is driven by a standard electric motor.
The motor output shaft directly connect with the pump shaft through a coupling.
The pressure-resistant cylinder and flow passage components are fixed between pump head and inlet &outlet section with stay bolts.
The inlet and outlet are located at the pump bottom at the same plane.
This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running, out-of-phase and overload.