Testing of EDJ fire pump sets before shipment

Electric horizontal multistage pump use for main pump, and standby pump also same, but use diesel engine driven.

This series of diesel fire-fighting pump sets has a wide range of head and flow, which can fully meet the fire-fighting water supply in various occasions of warehouses, docks, airports, petrochemicals, power plants, liquefied gas stations, textiles and other industrial and mining enterprises.

Diesel engine fire pumps are relatively common in life, and their performance requirements are relatively high. In normal use, more attention must be paid to maintenance to prolong the service life of the pump. Because diesel fire pumps are not omnipotent, there will be some problems in daily use, so when choosing equipment, we must pay attention to whether the quality of the equipment has reached the national standard. As fire equipment, all kinds of equipment must be Ensure performance, avoid affecting use in disasters, and delay rescue.

1. Electric pump, can use single stage pump, horizontal split case pump, end suction pump, multistage pump, material can be cast iron, stainless steel, and bronze impeller 
2. Diesel engine pump, with capacity and head equal to electric pump, with fuel tank, water tank，fan, control box
3. Jockey pump, horizontal or vertical, capacity will be small, but head should be higher than electric and diesel engine pump
4. Control panel: Auto Control of electric pump, diesel engine pump and Jockey Pump with overload, over current protection。
5. Accessories: check valve, gate valve, pressure vessel, generally 0.6mpa, 1.0mpa, 1.6mpa, Pressure Gauge, Pressure Sensor, Common Pipe for Suction and Discharge, Flexible Joints and Flanges, Common Base plant

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Mechanical seals are commonly used on fire pumps to ensure reliable and long-lasting operation. These seals are designed to create a tight, reliable seal between the pump shafts, and the fire pump’s motor. Mechanical seals are typically composed of stationary and rotating components that move against each other with minimal friction, to form a mechanical seal that can withstand the stresses of the fire pump’s operation. In addition to preventing leaks, mechanical seals can help improve pump efficiency, reduce wear and tear on motor components, and increase the life of the fire pump.

The EJ Dual Power Fire Pump System is an innovative and reliable fire protection solution. Combining an electric pump for robust water pressure and flow with a top-quality jockey pump for stable pressure maintenance, this system ensures efficient and timely water supply during fires. With advanced automation, remote monitoring, and energy-saving features, the EJ Dual Power Fire Pump System is a trusted choice for commercial, industrial, and residential applications.

Common accessories include:
Control Panels: For monitoring and operation.
Pressure Relief Valves: To prevent overpressure situations.
Hose Reels and Cabinets: For easy access during emergencies.
Flow Meters: To monitor water flow rates.
Jockey Pumps: For maintaining pressure in the system.

Flow: 30-9000 GPM
Head: 3-20Bar
Speed: 740-2900r/min
Material: HT200, SS304, Bronze

Diesel engine fire pumps are mainly suitable for fire water supply and foam fire extinguishing systems in petrochemical, natural gas, power generation, cotton and linen textiles, warehouses, airports, docks, high-rise buildings and other industries. It can also be used in occasions such as water ships, offshore oil tankers and fire fighting ships. The unit adopts imported diesel engine and fire pump. It has the characteristics of quick start, reliable water diversion, reasonable power reserve, stable operation, high degree of “three modernizations”, wide range of pressure and flow, etc. It is an advanced and reliable fire-fighting equipment.

It’s a customized EJ fire pump set consisting of electric pump, jockey pump along with control panel, and accessories. It is equipped with priming tank for doing negative suction.

Ignite a new level of fire protection with the Outdoor Fire Pump Set. This versatile and reliable pump set is designed to enhance fire safety in various applications. From powering fire hydrants and stabilizing sprinkler systems to safeguarding residential areas, industrial buildings, and high-risk environments, the Outdoor Fire Pump Set delivers optimal performance and unmatched reliability. Elevate your fire safety standards with this powerful solution and gain peace of mind knowing that your property and lives are protected. Choose the Outdoor Fire Pump Set and experience the ultimate fire protection solution.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

The engine provides the power necessary to drive the pump, allowing it to generate the high-pressure water or firefighting agent needed to combat fires.

Common causes include power supply issues, mechanical failures, improper maintenance, and incorrect installation. Regular testing and adherence to maintenance schedules are crucial to prevent failures.

At the moment when fire safety is deeply rooted in the hearts of the people, diesel engine fire pumps are gradually replacing ordinary fire pumps, especially in manufacturing enterprises, with large flow water supply systems, excellent performance, and stable operation mode, they are the fire safety experts trusted by modern enterprises. However, the more expensive and high-tech products are, the more attention they need.

Instructions for use:
Altitude≤1000m;
Ambient temperature: +5℃～+40℃;
Relative humidity: <= 90%. Scope of application of fire pump set: Equipment suitable for fire protection occasions such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas, textiles, ships, oil tankers, etc.

answer:
1. The raceways of the inner and outer rings are peeled off, cracked or severely worn.
2. The rolling body is out of round or the surface is peeled off, with cracks.
3. The cage is seriously deformed or worn, and the rolling elements cannot be fixed.
4. There is vibration or noise when turning, and there is reverse reversal or braking when stopping.
5. The fit clearance of the bearing exceeds the maximum value of the specified clearance.

In urban areas, where water supply systems may be complex and highly interconnected, fire pumps play a crucial role in ensuring resilience and reliability. These pumps help maintain adequate water pressure and flow across different zones within the city, especially during peak demand periods or in the event of a fire. Fire pumps are often integrated into municipal water systems, providing additional pressure support for firefighting efforts and ensuring that water can be delivered quickly to where it is needed most. In some cases, fire pumps are also used to support the overall stability of the water supply network by compensating for pressure drops caused by infrastructure issues or increased usage.

1. Make sure the fire pump is regularly inspected and tested according to the manufacturer’s recommendations.

2. Inspect all electrical components and wiring to ensure they are in good working order.

3. Ensure the fire pump is properly lubricated and any worn parts are replaced.

4. Check the suction and discharge valves for proper operation.

5. Inspect the motor and its bearings for signs of wear or damage.

6. Test the fire pump for pressure, flow, and suction.

7. Clean the fire pump, its components, and the surrounding area regularly.

8. Ensure any repairs or maintenance is done by a certified technician.

1.Flow: 50-5000GPM
2.Head: 3-20Bar
3.Caliber: 25-800mm
4.Power: Electric pump: 1.5-710 kw, Jockey pump: 0.55-160kw
5.Speed: 740-2900r/min
6.Material: HT200，SS304，Bronze
The EEJ Fire Pump System is an innovative solution designed to enhance fire safety in various settings. With exceptional performance and efficiency, the EEJ Fire Pump System delivers high pressure and large flow capacity, enabling rapid and effective fire suppression.Overall, the EEJ Fire Pump System is a reliable choice for safeguarding lives and properties, making it an ideal fire protection solution for commercial buildings, industrial facilities, and residential areas.

Yes, there are various types of nozzles available for firefighting pumps, each designed for specific purposes. For example, fog nozzles disperse water into a fine mist, which is useful for cooling and controlling fire, while solid stream nozzles deliver a concentrated stream of water for long-range firefighting. Choosing the appropriate nozzle can significantly impact the effectiveness of firefighting efforts.

Diesel engine fire pumps can be used for fire water supply in warehouses, docks, airports and other places. We usually choose the appropriate diesel engine fire pump model application according to the head, flow rate, power, medium properties, required materials, etc. provided by the user. In order to avoid mistakes, the loss caused by the installation environment will also be considered comprehensively to ensure stable and reliable efficiency.

The fire pump is designed to divert water when a fire is detected by the sprinkler system or other fire-detection device. The pump will then draw water from the water supply source and deliver it to the sprinkler system, fire hoses, or other fire suppression devices.

– Diverse Area Coverage: Ensuring comprehensive coverage for offices, retail spaces, dining areas, and other facilities.
– High Occupancy Management: Implementing systems that handle high occupancy and prioritize occupant safety.
– Integration with Building Management Systems: Coordinating with HVAC, security, and other building systems for comprehensive safety.
– Compliance with Commercial Building Codes: Adhering to fire safety regulations specific to multi-purpose commercial buildings.

EDJ fire fighting package set is composed of diesel fire pump, electric pump, jockey pump.
Electric pump can choose single-stage pump, horizontal split case pump, end suction pump, multistage centrifugal pump, vertical turbine pump which are made of cast iron or stainless steel. Regarding to the impeller, we also could choose the bronze impeller.
Diesel fire pump, the flow is same as the electric pump. The diesel engine is combined by high elastic coupling or universal joint connection. The diesel fire set also includes fuel tank, water tank, fan, control panel and other components.
Jockey pump which is horizontal or vertical. Normally, it has the characteristics of small flow and higher head (more10-15m head than the electric pump and diesel pump).

The function of the diesel fire pump is very powerful. We can set the control time during use, for example: preheating in advance, pre-lubrication or timing start. The use of high technology has made some complicated and time-consuming things easier. The preheating setting in advance has greatly reduced the preparation time for rescue, allowing firefighters to rescue at the first time. In the face of disasters, time is money, time It is life.

1. Water filling treatment Before selecting the power-on power, make sure that the fire pump should be filled with water when it is turned off, and the suction should be increased to make the pressure difference larger and quickly clean up some acid-base reagents and other pollutants. Make sure to fill the water well.

2. Selection of electrified power The horsepower of the fire pump will be selected according to the size of the pump. Before electrifying the pump, carefully check the electrical power. Once the power is not grasped accurately, it is easy to cause insufficient suction. Therefore, in order to make it have sufficient suction, the power should be selected reasonably. If there is no electricity, the fire pump cannot be started, let alone used. But does it mean that the pump can be used as long as there is electricity? Not necessarily, the pump can only be used if the electrified power is reasonable and the voltage is within the normal range.

Horizontal and vertical fire pumps differ in their physical orientation, and the choice between them depends on the available space and installation requirements. Horizontal fire pumps are positioned parallel to the ground and are commonly used in facilities with ample floor space. Vertical fire pumps, on the other hand, are designed to be installed in a space-saving, vertical orientation. This makes them suitable for facilities with limited floor space, such as high-rise buildings.

Vertical pumps are often used in skyscrapers, where space is at a premium. Both types of pumps are equally effective, and the choice between them is typically influenced by the layout and structural constraints of the building.

While the primary purpose of fire pumps is firefighting, some systems may incorporate them for other water supply needs, such as industrial processes or water distribution. However, their design and functionality are optimized for firefighting applications.