The Excellent Performance XBC-XA Diesel End Suction Pump for Superior Fire Protection!

Diesel engine fire pump is a common necessary facility. Only when the fire signal comes, and the electric water pump fails or the power supply is cut off, the diesel engine fire pump will automatically start. The diesel engine fire pump is installed together with the electrical instrument, with complete functions, compact structure, automatic fault alarm, accepting the starting signal, and can automatically complete the starting procedure and run at full load quickly. When the diesel engine fire pump is insufficient in fuel, low battery voltage, and high lubricating oil temperature , enough to ensure that the diesel engine fire pump starts in a low temperature environment, the entire system of the diesel engine fire pump is safe, reliable, and easy to use.

The diesel engine fire pump has the characteristics of good starting characteristics, strong overload capacity, compact and reasonable structure, convenient maintenance, simple and reliable use, etc. The unit is equipped with protection functions such as overspeed, low oil pressure, three start failures, high water temperature, low oil level, and low battery voltage. Diesel engine fire pump is composed of diesel engine, chassis, cooling water tank and fan, high elastic coupling, water pump, diesel tank and control panel and other equipment. The diesel engine fire pump is directly connected with the diesel engine through a highly elastic coupling or a diaphragm coupling, and is installed on a common channel steel chassis.

Flow rate:50-750 GPM
Head:Less 100 m
Speed:1500-3000 RPM

Environmental and Working Conditions
Ambient temperature:
Ambient temperature range 4℃-40℃.
Working to improve the ambient temperature every 5℃, its power decreased by 1%(to 25℃ as the base);
Altitude:
Reference elevation 91.4m, the reference atmospheric pressure is 100KPa;
If the work to an altitude of over 1000m, reference should be corrected GB1105 1-1987 diesel engine power, you can consult the specific technical department;
Relative humidity ≤80% (20℃), outdoor allow 90% (when installed outdoors in the order presented, you can choose to configure the outdoor structure, protection class IP55).

Diesel engine fire pumps offer unmatched efficiency and reliability in fire safety. With powerful diesel engines at their core, these pumps deliver high-pressure water flow to effectively combat fires. They operate independently of the electrical grid, ensuring uninterrupted functionality during power outages. Widely applied in building fire suppression, oil fields, and marine facilities, these pumps provide critical firefighting capabilities. Innovative features like automated control systems and energy-saving technologies further enhance their performance and sustainability. Diesel engine fire pumps are the epitome of efficient fire safety solutions.

The diesel engine fire pump set is used in the fire water supply system as the backup system of the electric fire pump set to solve the reliability problem of the fire water supply system. Various instruments and meters are used to monitor the operating conditions of diesel engine fire pumps in real time to ensure the stable operation of automatic control. It is a good solution to the failure of electric fire pumps in the fire water supply system, and has achieved a good market.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-200 mm
Frequency：50 or 60 Hz
Working Pressure：≤1.6 MPa

Diesel engine fire pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. This diesel engine pump set can transport clean water or other liquids whose physical and chemical properties are similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump’s flow parts, sealing form and adding a cooling system.

Flow：2000 GPM
Head：12Bar
The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

The role of diesel engine fire pump group
Fixed fire water supply equipment can use fire pumps driven by electric motors, or fire pumps driven by diesel engines. The international standard name of diesel engine fire pump set is “engineering diesel engine fire pump set”. It uses diesel engine as power to drive fire water pump, and outputs pressurized water or air foam mixture for fire extinguishing work.
When dual power supplies are required or in order to further improve reliability, fire water supply equipment often adopts fire pumps driven by diesel engines. After the various components of the diesel engine fire pump set have passed the strict certification test and passed the test, their reliability is much higher than that of the electric motor fire pump set.

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 

·NON-UL  Standard:
Flow：50-5000GPM 
Head： 40-250 PSI 

The hand-held fire pump is mainly suitable for the fire fighting of the armed police fire brigade, various professional fire brigades, industrial and mining enterprises, counties, villages and towns, etc. It is more specific in areas where fire vehicles cannot pass. The hand-held fire pump can also drain waterlogging, fight drought, and green water , water supply and emergency disaster rescue ideal equipment.

The national standard name of diesel engine fire pump is “diesel engine fire pump unit for engineering”

The national standard model is xbcl / Q, where l is the lift value and Q is the flow value.

XBC diesel engine fire pump unit is the latest national standard GB6245-2006 fire pump performance requirements and test methods. This series of products has a wide range of lift and flow, and can fully meet the fire water supply for various occasions of industrial and mining enterprises such as warehouses, docks, airports, petrochemical, power plants, liquefied gas stations, textiles, etc.

The product has the characteristics of good startup, strong overload capacity, compact structure, convenient maintenance, simple use and high automation. It is a fire-fighting equipment with reliable performance.

Operating conditions:

1. Sea level: ≤ 2500 m

2. Ambient temperature: – 25 ～ 55 ℃

3. Relative humidity of air: 9-95%

4. Seismic intensity: 7 degrees

The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The Diesel Engine End Suction Fire Pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more.

The diesel engine used in the diesel engine power pump unit is made of domestic or imported high-quality products. It has good starting characteristics, strong overload capacity, compact structure, convenient maintenance, simple use, and high degree of automation. It is an advanced and reliable fire-fighting equipment.

Experience efficient fluid transfer with the XBC-XA Diesel End Suction Pump. With its unique end suction design and powerful diesel engine, this pump offers reliable performance and exceptional pumping capacity. It is suitable for a wide range of applications, from industrial fluid transfer to fire protection systems. The XBC-XA Diesel End Suction Pump features automatic operation, advanced control systems, and automatic fault detection for added safety and convenience. Choose this versatile pump for reliable and efficient fluid transfer in various industries.

For large fire pumps, diesel fire pumps are presently the hottest fire pumps on the request, especially large storages, jetties, airfields, petrochemicals, power shops, and thawed gas stations, which frequently bear similar large inflow and high power fire pumps. still, unlike the current domestic request, there aren’t numerous professional manufacturers of diesel engine fire pumps, and the models aren’t colorful. As far as XBC- IS diesel engine fire pumps are concerned, it has its own characteristics.

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 

·NON-UL  Standard:
Flow：50-5000GPM 
Head： 40-250 PSI 

XBC-S single-stage double suction diesel engine fire pump is used for various occasions of emergency standby pumps. The diesel engine fire pump set is equipped with various automatic functions to meet the requirements of national standards, so as to ensure that the equipment is in normal standby state for a long time and put into fire extinguishing work at any time.

Diesel engine fire pump unit is a kind of pump equipment that is widely used in fire protection, and it is more suitable for mobile work in fire pumps. In fact, it is driven by a diesel engine connected to the pump head of the fire pump. Compared with motor drive, it can be used in the field, mines, and places lacking power supply. It is also called a diesel engine pump or a diesel engine fire pump unit.

As a kind of fixed fire extinguishing equipment, automatic diesel engine fire pump set has been widely used in fire diversion, especially in fire water supply under unexpected circumstances such as no power supply or abnormal power supply (mains power). The fire pump equipped in the unit is a horizontal single-stage and multi-stage fire-fighting special pump. It is mainly composed of diesel engine, fire pump, connection device, fuel tank, radiator, battery pack, intelligent automatic control panel, etc.

The XBC-ISO Diesel Engine Fire Pump Set is an efficient and reliable firefighting equipment that combines the power of a robust diesel engine with the advantages of an ISO single-stage centrifugal pump. This pump set is ISO certified, ensuring excellent quality and performance. The XBC-ISO pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more. This firefighting pump set is equipped for emergency rescues and can operate efficiently even during power outages. Moreover, its end-suction design simplifies operation and saves installation time.

XBC series diesel engine fire-fighting pump group is a new-style fire-fighting equipment developed in accordance with GB6245-98 and NEPA20 standard. The equipment has a wide range of pressure and temperature and can be used for almost every occasion necessary for fire-fighting.
The diesel engine fitted with the equipment is an excellent product domestic or imported, features good starting performance, strong overload capacity, compact structure, easy maintenance and use and high degree of automation. The equipment is really a fire-fighting one advanced and reliable in performance.

Diesel engine fire pump can be used in fire water supply in warehouses, docks, airports and other occasions. We usually choose the appropriate diesel engine fire pump model and application according to the head, flow, power, medium properties, and required materials provided by the user. In order to avoid mistakes, the loss caused by the installation environment will be comprehensively considered to ensure stable and reliable efficiency.

As a common necessary facility, diesel engine fire pumps are automatically started when the fire signal is coming and the electric water pump failure or the power supply is disconnected. The diesel engine fire pump and the electrical instrument are installed together, with complete functions, compact structure, automatic alarm, accepting the start signal, and can automatically complete the startup program and fast full load operation. It is enough to ensure that the diesel engine fire pump is started at low temperature environments. The entire system of diesel engine fire pump is safe and reliable, and it is convenient to use.

Diesel engine fire pumps are relatively common in life, and their performance requirements are relatively high. In normal use, more attention must be paid to maintenance to prolong the service life of the pump. Because diesel fire pumps are not omnipotent, there will be some problems in daily use, so when choosing equipment, we must pay attention to whether the quality of the equipment has reached the national standard. As fire equipment, all kinds of equipment must be Ensure performance, avoid affecting use in disasters and delay rescue.

Experience efficient fluid transfer with the XBC-XA Diesel End Suction Pump. With its unique end suction design and powerful diesel engine, this pump offers reliable performance and exceptional pumping capacity. It is suitable for a wide range of applications, from industrial fluid transfer to fire protection systems. The XBC-XA Diesel End Suction Pump features automatic operation, advanced control systems, and automatic fault detection for added safety and convenience. Choose this versatile pump for reliable and efficient fluid transfer in various industries.

Self-priming fire pump is a mechatronics equipment researched and developed according to the provisions of my country’s fire regulations and the different requirements of various users. The product is innovative, advanced and practical. It simplifies the design of the pump room. The underground pump room can be changed to the ground, which is convenient for construction and saves investment; the outdoor pool can also be used to meet the requirements of use; the self-priming function can be used to make the fire pool deeper. To 3-6m, under the same effective volume, the land area occupied by the pool is much smaller than the original, which saves land, facilitates construction, reduces construction costs, and greatly saves investment; it can work under the condition of negative water level and meet the requirements in time. Fire protection requirements; the self-priming fire pump can discharge water in time to rescue and extinguish fires in time; it has a strict and reliable automatic circuit detection function, so that the unit is usually in a quasi-fire-fighting state.

Diesel engine fire pumps are different from traditional fire pumps in that they cover a wide area and have a large spray force. Naturally, the equipment and technology must be more prominent. At present, there are not many manufacturers who can apply the working principle of diesel engine to the design of diesel engine fire pump, adhere to the principle concept, and can perfectly integrate the assembly of other parts of diesel engine fire pump.
Better Technology Co., Ltd., a joint-stock enterprise specializing in the design, development, manufacture and sales of general fluid equipment, has introduced a high-level design,development and enterprise management mode, and has hired foreign experts to provide technical guidance for the company for a long time. The products are competitive.