The stainless steel submersible sewage pump

Maintenance requirements for vertical turbine pumps typically include periodic inspection and lubrication of bearings, checking and adjusting impeller clearances, monitoring motor performance, and ensuring proper alignment of the pump and motor.

XA Bare Shaft Pump under painting
XA100/32,XA100/20,XA100/26

Integrated Prefabricated Pump Station

The pump station is supplied as an integrated unit. It includes a pump station cylinder, pressure pipeline, maintenance platform, maintenance ladder, grill filter, coupling system, pump lifting system, ventilation, anti-skid manhole cover, lighting system, etc.

According to CFO fluid dynamics finite element analysis, the base structure is optimized to prevent sludge deposition in sewage treatment and no odor residue.

All internal installation and commissioning work is completed in the factory. The pump station is only installed on the site, which greatly reduces the civil construction period and engineering cost, and reduces the overall investment of the owner.

The pumping station cylinder is made of FRP, and the internal fittings are made of anti-corrosion materials such as SUS304 and hot-dip galvanizing. No maintenance is required, and the normal service life can reach more than seven years.

Intelligent operating system, easy to understand, to run, monitoring without personnel supervision

Welcome your inquiry!

The SXBWP Non-Negative Pressure Frequency-conversion Water Supply Equipment offers a comprehensive solution for addressing low water pressure challenges in various settings. Designed to cater to areas with inadequate municipal water pressure, as well as residential complexes, office buildings, hotels, schools, and industrial enterprises, this equipment ensures a stable secondary pressurized water supply. With features such as non-negative pressure generation, water and energy conservation, prevention of secondary pollution, and convenient installation, the SXBWP equipment delivers reliable water pressure enhancement while promoting efficient water usage and minimizing environmental impact.

used for pumping normal temperature water and warm water under 100°C from wells, river, lake , sea. Type JCW are better used for city, factory dirty water and water containing great sand in river and sea, widely used in factories and mines, city and countries, petrolatum filed, plant and irrigation on farmland.

Filter is an indispensable device on the transmission medium pipeline, usually installed in the pressure reducing valve, pressure relief valve, fixed water level valve, square filter other equipment import end equipment.

No blockage vertical sewage pump, including a pump body, base, filter plate and double cutting edge, the inlet of the pump body is provided with a base, the base is provided with a horizontal filter plate, the filter plate is provided with a plurality of annular filter holes;

Centrifugal pump is designed according to the principle of centrifugal force. The high-speed rotating impeller blade drives the water to rotate and the water is thrown out, so as to achieve the purpose of transportation

Suitable for use with clean water. For Fire hydrant water supply, sprinkler system, fire system voltage regulator.

Fire booster pump is used to maintain system pressure without starting the main pump. These pumps are not designed to keep up with full system demand, their only function is system pressure maintenance.

Vertical inline close coupled fire pumps are specifically designed for vertical mounting. The suction and discharge nozzles are located on the same centerline 180° apart. Vertical pumps significantly reduce required mounting space. They are easy to maintain.

The pump is optimized by domestic advanced hydraulic model. At the same time according to the use of temperature, medium and other different ISW based on the derivation of hot water pump, high temperature pump, chemical pump, oil pump, is the current national standard finalize the promotion of products. Horizontal pipeline oil pump

The remote monitoring system for the water supply pump station is suitable for the remote monitoring and management of the pressurized pump station in the urban water supply system.
The pump station manager can remotely monitor the water level of the pump station pool or the entry pressure, the working status of the booster pump group, the outbound flow, and the exit pressure from the monitoring center; they can remotely control and automatically control the start and stop of the booster pump group; When optical fiber communication is used, the panorama and important stations in the station can be monitored by image, so that the pump station can be unattended.

An “air conditioner pump” is not a common term in the context of air conditioning systems. However, it’s possible that you might be referring to one of the components or aspects related to air conditioning systems. Let me provide some information on components that could be related to what you’re asking:

The company introduced high-performance water pumps produced by German advanced technology. By using the prototype impeller and this type of impeller and its cutting, the pump has a full and broad model spectrum and high use efficiency. Within the range of model spectrum performance, the pump can provide
A pump that properly meets the working point of any flow and head required by the user.
It adopts the best hydraulic model at home and abroad that can self-balance axial force and radial force, with stable performance, high efficiency, compact structure, low vibration, high pressure resistance of the pump body, and convenient installation and maintenance.

◆The temperature of the medium should not exceed 60℃, the weight of the medium should be 1-1.3kg/dm3, and the PH value should be in the range of 5-9.
◆For pumps without internal gravity circulation cooling system, the exposed liquid level of the motor part should not exceed 1/2.
◆The material of the main parts of this pump is cast iron, so it cannot be used for pumping highly corrosive liquids. If the conveying medium is corrosive, please choose a stainless steel submersible pump. If you also need an explosion-proof submersible pump, you must choose a stainless steel explosion-proof submersible pump.

Widely used in water supply and drainage of industry and city, pressurized water supply of high-rise buildings, irrigation of gardens, fire-fighting pressurization and relevant equipments. This series have many advantages, such as wide range of performance parameters, convenient installation, little vibration, low noise, high efficiency, long service life and so on, very popular with users.

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water lift pipe, etc. The specific fire pump model is determined according to the environment and performance requirements, and at the same time According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.

Fuel tank specifications：200L/ 400L/ 600L/ 800L/ 1000L/
1200L/ 1500L/ 1800L/ 2100L/ 2500L/ 3100L/ 3600L/ 4100L/ 4500L
The diesel fire pump system serves as a backup power solution, utilizing a diesel engine to provide power and ensure the fire pump’s reliable operation during electrical outages. The associated fuel tank is a crucial component for storing diesel fuel and providing a continuous supply to the diesel engine, ensuring a sustained water flow during fire incidents. The system not only boasts reliability but also requires minimal maintenance, backed by comprehensive after-sales service. Whether for large commercial buildings, industrial facilities, airports, or hospitals, this system offers users a dependable firefighting solution to safeguard security.

The device operates by drawing foam concentrate from a storage tank and blending it with water at a set ratio, often using a venturi or a balanced pressure system. The mixed solution is then pressurized and delivered through fire hoses, nozzles, or sprinkler systems to the fire scene.

1、 Star delta startup mode
2、 Auto coupling step-down startup mode
3、 Soft start mode
4、 Direct start mode

Self priming pump with diesel engine driven is compact, easy to operate, running stable, easy to maintain, efficient, with long service life and large suction capacity.

The high-efficiency non-clogging submerged sewage pump is a new generation of pump products successfully developed on the basis of the introduction of foreign advanced technology and combined with the use characteristics of domestic water pumps. Features. It has a unique effect in discharging solid particles and long-fiber waste.

1. The submersible sewage pump has a compact structure and a small footprint.
2. The submersible sewage pump is easy to install and maintain.
3. The submersible sewage pump has a long continuous operation time.
4. The submersible sewage pump does not have problems such as cavitation damage and irrigation and water diversion.
5. Submersible sewage pump. Low vibration and noise, low motor temperature rise, no pollution to the environment.

Starting mode
* Direct online <15kw * Y-△ voltage reduction startup 15kw~75kw (don’t adapt to submersible sewage pump control equipment) * Self-coupling voltage reduction startup >15kw (adapt to submersible sewage pump)
* Soft starter startup >15kw
Control mode
Y — automatically control the start and stop of the pump according to the height of the liquid
P — automatically controls the start and stop of the pump according to the pressure. Used in life and fire water supply and drainage pressurization system
T — Control the start and stop of the pump according to the set-up temperature. Used for constant temperature and heat exchange system

Horizontal multi-stage pump is a kind of drainage pump, which is suitable for water supply and drainage in mines, factories and cities. It is used to transport clear water without solid particles or liquids with physical and chemical properties similar to clear water. The temperature of the medium being transported is 0 °C. ～80℃, the allowable inlet pressure is 0.6MPa.

The ZWG non-negative pressure water supply equipment is a pressurized water system designed to address low or unstable municipal water pressure in areas with insufficient water supply. This equipment ensures a stable and reliable water supply, particularly suited for high-rise residential buildings and schools. By effectively boosting water pressure, it offers continuous and stable water flow, meeting the domestic water needs of residents and students. The ZWG equipment’s energy-efficient design and advanced control systems contribute to reduced energy consumption, making it an environmentally friendly choice. Overall, the ZWG non-negative pressure water supply equipment is a reliable and essential solution for ensuring a consistent water supply in areas facing water pressure challenges, providing enhanced water pressure and flow to meet the demands of various settings, including high-rise residential buildings and educational institutions.