Top Benefits of End Suction Fire Pump

Pumps type IS is a kind of axial suction centrifugal pump with single stage and suc-tion.
It is used to pump clear water and physical or chemical liquid similar to clear water below85℃, and is widely applied to industries, to citywater supply and drain, and also to agricultural and orchard irrigation.

Fire pumps are widely used in our production and life, such as in water treatment, fire safety and other departments. After the reform and opening up, it is widely used in life and production due to its characteristics of complete sealing, no leakage, and corrosion resistance.

The Vertical Single stage fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-400 mm
Frequency：50 or 60 Hz

The vertical turbine pump can be used to transport liquids such as clear water below 55°C, rainwater, scale water, sewage, industrial wastewater with corrosive irritation, sea water, etc.; after special design, it can transport liquids at 90°C. It is widely applicable to industrial and mining enterprises such as water supply companies, sewage treatment plants, power plants, steel plants, and mining, as well as engineering projects such as municipal road engineering water supply and drainage, farmland irrigation, and flood control and drainage.

Site conditions
YE3 series motors air suitable for almost all applications and operate satisfactorily at temperatures from -20 to +40 and
altitudes up to 1000 meters above sea level.
Temperature and insulation
The Motors’ insulation system are designed by Class F(155 ), operated with Class B(80K). Which incerase the motor useful
life and reliability.
Cooling and ventilation
The standard cooling method is totally Enclosed Fan Cooled(TEFC) in accordance with IC411 of IEC60034-6. Standard
motors are equipped with radialflow plastic fans.
Protection class
The standard degrees of protection is IP55.The IP55 enclosure means complete hoseproof and dustproof protection. A
higher degrees of protection is available.
Motor protection
Motors can be installed with PTC, PT100, such as winding and bearing temperature measurement as well as other kinds of
protection on request

The XBD-W horizontal single-stage fire pump is a reliable and efficient fire protection solution. Designed with advanced technology, this pump offers powerful drainage capabilities and dependable performance, providing outstanding fire protection for buildings and industrial facilities. This article highlights the features and advantages of the XBD-W horizontal single-stage fire pump, explaining why it is the ideal choice for your fire suppression system.

Flow：50-7500 GPM
Head：3-20 Bar
The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

Vertical turbine pumps are mainly used to transport clean water and sewage containing certain solid particles, corrosive industrial wastewater and seawater. Widely used in raw water treatment plants, sewage treatment plants, metallurgical steel industry, power plants, mines, municipal engineering and farmland water conservancy projects.

Vertical Multistage Electric Fire Pump is a kind of vertical non-self priming multistage centrifugal pump, which is driven by a standard electric motor.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

Features:
* Automatic start:After receiving the start signal, the diesel pump unit can start automatically and put
into full load operation within 5-15 seconds.
* Automatic charging: Batteries can be automatically charged by charging motors of municipal or
diesel engines to ensure the smooth start of the unit.
* Automatic alarm:Automatic alarm and protection for diesel engine faults such as low oil pressure
and high water temperature, alarm and stop at super speed.
* Reliable and Economic:It can run in the condition of power cut,no electricity charge.

End-suction centrifugal pump is a non-self-priming, single-pole single-suction, pump body and base fixed, its maximum working flow can reach 1200 cubic meters per hour, so this series of pumps fully meet the needs of fire water supply, can improve its extinguishing speed. The mechanical seal of this series adopts the standard wear-resistant mechanical seal, and the bearing adopts the bearing frame, which can locate the bearing, avoid the serial movement of the bearing, and at the same time improve the rigidity of the rotor parts, so this series of pumps use The lifespan will also be longer. At the same time, this series of water pumps also have the functions of stable operation, convenient maintenance and low operating noise, so this series of water pumps is the first of the fire system equipment.

The Vertical Single stage fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more.

NL sewage mud pump
Max flow :180m³/h
Max head：16m

Series OTS pumps are single stage,double suction with horizontally split casings.
They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105℃.
Series OTS pumps are available for capacities Of 68-18000m3/hr and heads of 70-200m.
They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

Structural Description
1. Electric Fire Pump XBD series fire pumps are a kind of new type fire products researched and developed in full compliance with the state issued newly standard of GB6245-2006 “Fire pump”, according to the end-user’s practical needs and special using requirements. The inspection of the state fire equipment quality supervising center shows its all kinds of performance indexes are up to or over the standard’s requirements and it earned the certificate for fire state products.
2. Jockey Pump Pump motor, pump head, guide vanes, impeller, pressure tube, and out of the water segment, the shaft, mechanical seal components. Pump key parts guide vanes, impeller, pressure cylinders, shafts are made of stainless steel pump head, and out of the water segment: CDL, pump iron castings CDLF pump with stainless steel precision castings. Pump shaft seal, single mechanical seal friction pair to support the use of alloy steel carbide / graphite, the guide vanes. Pump and piping connection type for the circular flange connection, according to user need to use different connection methods.

Equipment control function description
The equipment is designed to have one use and one standby function. The main pump runs
normally, and the standby pump starts automatically after the main pump fault .Control
cabinet with two start ways: remote start function and site start. (DC24V provided; Two
startup modes are available for users to select)
◆ Automatic start state
First, the switch to the “automatic” position, and then the remote startup instruction
sent. Upon receiving the startup instruction, it will immediately enter the running state, and
then the corresponding fire pump (jockey pump) indicator light on, the system will run the
main pump.Stop the running fire pump (jockey pump)remove the remote start instruction.
◆ Manual start state
First, put the switch to the “manual” position, press “fire pump start up” or “pressure
jockey pump start up” , then fire pump (jockey pump)operation indication lights on, then
enter the running state. When the fire pump (jockey pump) is running, press the “fire pump
stop or jockey pump stop button and the fire pump (jockey pump )stops running

Packaging & Delivery
Packaging details: standard export wood case packing or as required
Delivery detail: within 30 days
Specifications
1.Fire Water
2.Fire sprinkler system water supply
3. Industrial process water recycling 
4. Long operation life
Application
1. Fire sprinkler system water supply, high-rise building partitions, fire water supply. 
High-rise buildings and residential group domestic water supply system. 
2. The district water supply and water transportation, industrial process water recycling, cleaning systems, high pressure washing systems. 

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.

The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing. The XA pump is capable of handling different fluid mediums and provides efficient flow control. Its operating principle utilizes centrifugal force to draw in and propel fluids through the pump. Overall, the XA single-stage centrifugal pump is a reliable and efficient solution for fluid pumping needs in industrial settings.

The mud pump is mainly used to transport the mud medium with high consistency or more particles and debris. It is often used in construction sites, enterprise production, and mud pond pumping.

ISW series horizontal centrifugal pump is a new generation of energy saving,environment friendly verticalcentrifugal pump researched and developed by our company,whichabsorbs advanced technology of similar products abroad and adoptsdomestic general performance parameters of centrifugal pumps.

CDL/CDLF is a kind of vertical non-self priming multistage centrifugal pump, which is driven by a standard electric motor. The motor output shaft directly connects with the pump shaft through a coupling. The pressure-resistant cylinder and flow passage components are fixed between pump head and inlet & outlet section with stay bolts. The inlet and outlet are located at the pump bottom at the same plane. This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running, out-of-phase and overload.

The Vertical Single stage fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more.

Flow：50-5000 GPM
Head：3-16 Bar (40-232 psi )
Power：11-1000 kw
Frequency：50 or 60 Hz
ISO end-suction pumps find wide application in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants, oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

These pumps are commonly used in municipal water systems, industrial facilities, power plants, and any location where a reliable water supply is necessary for firefighting. They are particularly useful where the water source is deep underground or where large volumes of water need to be moved vertically.

The OTS Double-Suction Split-case centrifugal Pump with High-Pressure Electric Motor is an exceptional firefighting equipment. This powerful combination delivers high flow rates and unmatched pumping efficiency, ensuring robust and continuous firefighting actions. Its compact design allows for quick deployment and rapid response, making it suitable for various settings. From rural wildfires to urban firefighting needs, this firefighting pump safeguards communities of all sizes, representing the pinnacle of safety and protection.

XA series single – stage centrifugal pump is one of the most popular pumps in China Better Technology Co., Ltd. launched the single-stage single suction centrifugal pump earlier. This product integrates the advantages of similar products at home and abroad and is designed with excellent hydraulic model. Therefore, the excellent hydraulic performance and structural characteristics of XA series centrifugal pump ensure that users can effectively reduce the operating cost of the pump in various applications.

The G Single Screw Pump is a versatile positive displacement pump designed for the transportation of high-viscosity liquids. Featuring inter-meshing screws within the pump body, it creates continuous sealed chambers for efficient fluid movement. This pump finds widespread application in industries such as chemical, petroleum, food, and pharmaceuticals, where it excels at conveying high-viscosity, high-temperature, abrasive, or corrosive liquids. Its advantages lie in high-precision conveying, excellent self-priming capabilities, wide applicability, corrosion resistance, and low noise operation. The G Single Screw Pump offers a reliable and efficient solution for industrial liquid transportation needs.