Top-Quality Diesel Driven End Suction Fire Pump

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The XBC-ISO pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more. This firefighting pump set is equipped for emergency rescues and can operate efficiently even during power outages. Moreover, its end-suction design simplifies operation and saves installation time.

XBC-S single-stage double suction diesel engine fire pump is used for various occasions of emergency standby pumps. The diesel engine fire pump set is equipped with various automatic functions to meet the requirements of national standards, so as to ensure that the equipment is in normal standby state for a long time and put into fire extinguishing work at any time.

A self-priming pump is able to overcome the problem of air binding by mixing air with water. After it gets rid of the air, the pump will continue to move water like a standard centrifugal pump.It is important to note that self-priming pumps can’t operate without water.Self-priming pumps can handle a variety of fluids and they do well with slurries, corrosive fluids, and solids.Solids handling is one of its most important advantages, as some self-priming pumps can handle solids up to 3 inches.Another advantage, when compared to a submersible pump, is its ability to continue pumping fluid while pump is still situated out of the pit.

The multistage pump has the advantages of high efficiency, reliability, durability, low noise, convenient maintenance and wide application range. D series single-suction multistage centrifugal pumps are widely used in high-rise buildings, fire protection, boiler feed water, high-pressure cold and hot water circulation of cooling water systems, parallel booster pump water supply systems and various irrigation fluid transportation. It is used to transport water or similar physical and chemical liquids with no solid particles and a temperature below 80 °C. Our factory’s products are all tested before leaving the factory to ensure that there are no quality problems.

The diesel engine fire pump is a fire pump directly driven by a diesel engine, which can start and complete the water supply in a short time. Diesel engine pump set is driven by diesel oil without external power supply. Diesel engine pump is suitable for agricultural irrigation, rescue and disaster relief, smelting, hangars, petrochemical oil depots, power plants, liquefied gas stations, textiles and other fire water supply occasions, especially in the absence of electricity, When the power grid cannot operate, it is the safest choice to use a diesel engine to drive the water pump.

The biggest difference between a diesel engine fire pump and an electric water pump is that it has its own independent power supply system, which ensures the normal operation of the project without power or power supply. Its role is self-evident, and it can be said to be a great helper in fire emergency .

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 

·NON-UL  Standard:
Flow：50-5000GPM 
Head： 40-250 PSI 

XBC diesel engine fire pump product head, flow range is wide, can fully meet the warehouse, wharf, airport, petrochemical, power plant, liquefied gas station, textile and other industrial and mining enterprises in various occasions of fire water supply.

The number of impellers is different, and the head is also different: Generally speaking, a single-stage pump has only one impeller, while a multi-stage pump has two or more impellers, which enables it to suck water many times and segment it. processing, which greatly increases the lift. Therefore, under the same medium flow, the lift of the multi-stage fire pump appears higher.

The XBC-S 330KW Diesel Fire Pump stands out for its exceptional performance and reliability. It possesses outstanding pumping capacity and lift height, enabling the swift delivery of large volumes of water to the fire scene, ensuring quick and efficient firefighting and fire control. Whether faced with fires in buildings, factories, warehouses, or other locations, the XBC-S 330KW Diesel Fire Pump is up to the task.

Flow：250-10000 GPM
Head： 3-16 Bar (40-232 psi)
Power：11-1000 kw
The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

Diesel engine fire pump is a good water supply equipment, which is widely used in both ordinary water supply and fire water supply. As long as the appropriate model is selected to match the application, and the inspection and maintenance work is done well, the diesel engine fire pump will basically not fail. The diesel engine fire pump is highly automated, and can be equipped with different operating systems according to the needs of use. It has strong overload capacity, convenient maintenance and good starting characteristics. Since there are so many advantages in use, the daily inspection and maintenance work should be more meticulous. The daily maintenance of the diesel engine fire pump must check the fuel tank, battery, transmission connecting plate, connecting screws, check the three leaks (water, oil, gas) – check the sealing surface of the oil pipe and the water pipe joint, etc.

The Diesel Engine Split Case Fire Pump is an essential equipment in firefighting systems, designed to meet emergency firefighting needs. Whether during power outages or in the absence of electricity supply, it provides reliable water supply and increases firefighting water pressure to ensure smooth firefighting operations.The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

The Portable Irrigation Pump is a portable and user-friendly tool used primarily by farmers and gardening enthusiasts for small-scale irrigation in fields, vegetable gardens, and flower beds. With its manual operation, this pump requires no external power source, making it suitable for remote areas lacking electricity or other energy supplies. Comprising a handle and a suction pipe, users can easily draw water from the source through reciprocating motion, delivering it efficiently to the roots of crops or plants for effective irrigation. Being both economical and eco-friendly, the Portable Irrigation Pump offers a reliable and convenient solution, particularly in areas with limited resources and where other irrigation equipment may not be available.

Ensure rapid and reliable fire protection with the Single Cylinder Diesel Self-Priming Fire Pump. This advanced pump offers automatic startup within 15 seconds of receiving fire signals, guaranteeing immediate response. Its automatic charging system ensures smooth operation, while built-in alarms and protections provide enhanced safety. With automatic preheating and a direct connection design, this pump is both efficient and reliable. It is suitable for various applications in areas where firefighting vehicles face limitations. The Single Cylinder Diesel Self-Priming Fire Pump is ideal for areas where access by firefighting vehicles is limited, such as small towns, industrial ports, and rural areas.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The Diesel Engine End Suction Fire Pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more.

The fire pump is an imported product from abroad. It is divided into different types according to different classification methods. It is fully sealed, leak-free and corrosion-resistant. It is widely used in environmental protection, water treatment, fire protection and other departments to pump various liquids. It is the creation of Ideal for pumps and fire protection systems in non-leakage, non-pollution civilized workshops and civilized factories. The pump types are similar, but the head and flow are different.

Flow: 30-9000 GPM
Head: 3-20Bar
Speed: 740-2900r/min
Material: HT200, SS304, Bronze

The EJ Fire Pump Set is combined an electric pump and a jockey pump.In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants,oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

When the diesel engine fire pump unit receives an effective fire signal, if the power supply system of the diesel engine fire pump is powered off, loses phase or the electric pump cannot start normally, the diesel engine fire pump unit will automatically start to run. Once the power supply system returns to normal or the electric pump can operate normally, it can automatically switch to the electric pump.

Flow：80-2700 GPM
Head：10-24 Bar 145-350 psi
Power：11-1000 kw
Caliber：65-300 mm
Frequency：50 or 60 Hz
Working Pressure：≤2.5 MPa

Routine maintenance includes checking for any signs of damage, testing the pump, driver, and controller, inspecting and cleaning the suction and discharge pipes, and ensuring the proper operation of auxiliary equipment like jockey pumps.

S single stage double suction split case fire pumps are used to pump the clear water or other liquids with similar physical and chemical properties as clear water. The temperature of transported liquid shall not exceed 80. It is applicable for factory, mine, city water supply, power station, irrigation and drainage of farmland and various water conservancy projects.

Diesel engine fire pump set is a new type of multi-functional fire fighting equipment developed by our company in strict accordance with the technical requirements of the national standard GB6245-2006 (fire pump) and the National Fire Protection Association NFPA20 (installation of centrifugal fire pumps). The product integrates industrial automation control technology, fluid machinery and machinery manufacturing.

It can be combined with electric pumps, jockey pumps, etc. to form an automatic water fire protection water supply system, and can be linked with the fire control center.

When the pump set receives the starting command, if the mains power is cut off, the automatic control cabinet of the diesel engine will immediately send a start signal to the starting motor of the pump set to start the motor to start the diesel engine at idle speed, and then gradually adjust the throttle to accelerate the diesel engine to the rated speed. . The control system will automatically monitor the operation of the diesel engine, such as the oil pressure, oil temperature, speed of the diesel engine, outlet pressure of the water pump, etc., and determine whether the diesel engine starts normally through automatic monitoring. If the start fails, the control system will send a restart signal, and if the three starts fail, the automatic control system will send a failure alarm. When the pump set receives a signal that the pressure of the pipeline network is restored or the mains power is restored to normal, the pump set will quickly slow down and stop automatically after monitoring the idle position for a period of time.

Diesel engine fire pumps are relatively common in life, and their performance requirements are relatively high. In normal use, more attention must be paid to maintenance to prolong the service life of the pump. Because diesel fire pumps are not omnipotent, there will be some problems in daily use, so when choosing equipment, we must pay attention to whether the quality of the equipment has reached the national standard. As fire equipment, all kinds of equipment must be Ensure performance, avoid affecting use in disasters and delay rescue.

Standard:
       UL    Flow：100-3000 GPM    Head： 90-250 PSI 
       NON-UL   Flow：100-10000GPM   Head： 40-250 PSI 

The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more.

The XBC-IS Diesel Fire Pump Set is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the XBC-IS Diesel Fire Pump Set delivers dependable performance to safeguard lives and properties from fire risks.

Diesel fire pump has the characteristics of good start-up, strong overload capacity, compact structure, convenient maintenance, simple use, high degree of automation, and is a reliable fire equipment.

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 

·NON-UL  Standard:
Flow：50-5000GPM 
Head： 40-250 PSI