Total Fire Safety with XBC-ISO Diesel End Suction fire Pumps

The diesel engine fire pump set adopts ISW pump.
1. The pump is the horizontal structure, the inlet and outlet are the same in diameter, and lying in the same center line, which can be installed in the pipeline as valve, the floor space needed is small, if the protection cover is added, it can be put in the open air;
2. The impeller is installed on the major axis of the motor directly, the axial is short in size, the structure is compact, can calibrate radial and axial load that produced by pump rounding effectively, thus guaranteed the pump operating steadily, vibration, and low noise;
3. The axle seal adopts machinery seal or machinery seal sets, uses imported titanium alloy sealed ring, medium-sized high-temperature resistance machinery seal and adopts the hard alloy material, wear-resisting seal, which can lengthen the life of machinery seal effectively;
4. It is convenient to install and overhaul, no need to dismantle or move pipeline system; just lifting off pump conjunction flat nut can take all rotor parts out;
5. Can choose series or parallel operation according to your requirements for flow and lift;
6. Can be installed horizontally according to the pipeline system requirement.

Diesel engine fire pumps are often used for emergency water supply in high-rise buildings, water companies, steel plants, wineries, chemical plants, hotels, hospitals, and other large-scale projects. Diesel engine fire pump is suitable for unattended emergency water supply system. The product has the characteristics of advanced technology, high degree of automation, superior performance, complete protection functions, reasonable structure, simple installation, and high cost performance. net pressure. Diesel engine fire pumps are selected according to different working conditions: single-stage single-suction centrifugal pumps, high-pressure multi-stage pumps, double-suction split pumps, etc.

The fire pumps used in diesel engine fire pump sets can be IS series single-stage type, S series new single-stage double-stage type, and D-type series segmental multi-stage type produced by our company. The diesel engines used in this series of equipment are domestic or imported products, which have the characteristics of good starting characteristics, strong overload capacity, compact structure, convenient maintenance, simple use, and high degree of automation. It is a reliable fire-fighting equipment.

Flow:2000GPM
Head:12Bar
The XBC-OTS Diesel Engine Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

Diesel engine fire pump has high efficiency, long operating life and high reliability. It can be used in independent fire water supply system, some can be used in fire protection and domestic common water supply system, and it can also be used in construction, municipal, industrial and mining, water supply and drainage, ships, field operations, etc.

Diesel engine fire pump, as a fixed fire extinguishing equipment, has been widely used in fire diversion, especially in the case of no power supply or abnormal power supply and other emergencies, other diesel engines can also be equipped as power engines according to the needs of users.

Fire pumps are not always running; they typically start automatically when a drop in water pressure is detected in the fire protection system.

We take pride in introducing the XBC 10-30-IS fire pump, a highly efficient and reliable equipment that will provide exceptional fire protection.

The XBC 10-30-IS fire pump stands out with its outstanding performance and advanced technology. Whether dealing with emergency situations in buildings, factories, warehouses, or ports, it can reliably provide a stable water source. With a flow rate of 10 cubic meters per hour and a head of 30 meters, the XBC 10-30-IS fire pump can swiftly deliver a large volume of water to the fire scene, ensuring effective fire control.

The XBC-ISO pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more. This firefighting pump set is equipped for emergency rescues and can operate efficiently even during power outages. Moreover, its end-suction design simplifies operation and saves installation time.

The XBC-OTS Diesel Engine Fire Pump is an essential equipment in firefighting systems, designed to meet emergency firefighting needs. Whether during power outages or in the absence of electricity supply, it provides reliable water supply and increases firefighting water pressure to ensure smooth firefighting operations. The XBC-OTS Diesel Engine Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

The Diesel Engine with Mixed Flow Pump is an advanced firefighting and rescue equipment. It is suitable for various environments, especially in areas with unstable power supply, where it maintains its peak efficiency. Moreover, this equipment is cost-effective, easy to maintain, and offers long-lasting firefighting assurance.

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 
The End Suction Fire Pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more.

The role of diesel engine fire pump group
Fixed fire water supply equipment can use fire pumps driven by electric motors, or fire pumps driven by diesel engines. The international standard name of diesel engine fire pump set is “engineering diesel engine fire pump set”. It uses diesel engine as power to drive fire water pump, and outputs pressurized water or air foam mixture for fire extinguishing work.
When dual power supplies are required or in order to further improve reliability, fire water supply equipment often adopts fire pumps driven by diesel engines. After the various components of the diesel engine fire pump set have passed the strict certification test and passed the test, their reliability is much higher than that of the electric motor fire pump set.

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-400 mm
Frequency：50 or 60 Hz

The diesel engine fire pump is a kind of electromechanical integration equipment which can be driven directly by the fire pump and can start and finish the water supply in a short time. It is suitable for agricultural irrigation, rescue and relief, smelting, aircraft depot, petrochemical oil depot, liquefied gas station, textile and other fire-fighting water supply occasions, especially in the case of power supply cannot be satisfied, the choice of diesel-driven pumps is a reliable and guaranteed equipment choice.

The diesel engine fitted with the equipment is an excellent product domestic or imported, features good starting performance, strong overload capacity, compact structure, easy maintenance and use and high degree of automation. The equipment is really a fire-fighting one advanced and reliable in performance.

Flow：50-7500 GPM
Head：3-20 Bar
Power：11-1000 kw
The XBC-JC Diesel Engine Vertical Turbine Fire Pump is a reliable and efficient hydraulic solution designed for extracting water from deep wells and hot springs. With its unique long shaft design and advanced technology, this pump delivers powerful pumping capacity and lift height, swiftly transporting large volumes of water to desired locations.

Diesel engine fire pump is a new product independently developed and produced by our company according to the market demand and applicable characteristics of domestic building fire pumps. Diesel engine fire pump series products have high efficiency, long operating life and high reliability (there is no failure of pneumatic seizure after a long period of inactivity), and are currently the first choice for pumps suitable for building nominal fire protection and sprinkler facilities in China.

-UL Standard:
Flow：100-3000 GPM   
Head： 90-250 PSI 
-NON-UL  Standard: 
Flow：100-10000GPM   
Head： 40-250 PSI 

The XBC-D Diesel Engine Fire Pump is specifically designed for various firefighting locations, including factories, commercial buildings, residential areas, and public facilities. It provides a reliable source of firefighting water and increases water pressure to meet emergency water supply and firefighting needs, especially in situations without electricity supply or during power outages.

Diesel engine fire pump can be used in fire water supply in warehouses, docks, airports and other occasions. We usually choose the appropriate diesel engine fire pump model and application according to the head, flow, power, medium properties, and required materials provided by the user. In order to avoid mistakes, the loss caused by the installation environment will be comprehensively considered to ensure stable and reliable efficiency.

Flow：250-10000 GPM
Head： 3-16 Bar
Power：11-1000 kw
The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

·UL Standard:
Flow：50-2000 GPM   
Head： 80-250 PSI 

·NON-UL  Standard:
Flow：50-5000GPM 
Head： 40-250 PSI 

The hand-held fire pump is mainly suitable for the fire fighting of the armed police fire brigade, various professional fire brigades, industrial and mining enterprises, counties, villages and towns, etc. It is more specific in areas where fire vehicles cannot pass. The hand-held fire pump can also drain waterlogging, fight drought, and green water , water supply and emergency disaster rescue ideal equipment.

The XBC-ISO Diesel Engine Fire Pump Set is an efficient and reliable firefighting equipment that combines the power of a robust diesel engine with the advantages of an ISO single-stage centrifugal pump. This pump set is ISO certified, ensuring excellent quality and performance. The XBC-ISO pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more. This firefighting pump set is equipped for emergency rescues and can operate efficiently even during power outages. Moreover, its end-suction design simplifies operation and saves installation time.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The Diesel Engine End Suction Fire Pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more.

The diesel engine fire pump has automatic, manual and fault self-checking functions. It can monitor the working status of the whole process, restore the function of failure start, automatic pre-lubrication and automatic restart of preheating, so that the equipment start-up is safer and more reliable. It has the functions of central control room remote control, remote control and field bus connection. Diesel engine fire pump is easy to use, equipped with remote instrument and instrument, which can be connected to the control center as needed, easy to install and use, and easy to maintain.??

The operation of the diesel engine fire pump set is stable, efficient and energy-saving. The full name of the full-automatic diesel engine pump set is the emergency diesel engine water pump set, which can be selected according to the specific requirements of the head, flow rate and conveying liquid of the place of use. The flow range of the conveying liquid is 10-870L/s, the pressure range is 0.15-6MPa, and the speed range of the diesel engine is 1500-2900rpm.

The diesel engine fire pump set is used in the fire water supply system as the backup system of the electric fire pump set to solve the reliability problem of the fire water supply system. Various instruments and meters are used to monitor the operating conditions of diesel engine fire pumps in real time to ensure the stable operation of automatic control. It is a good solution to the failure of electric fire pumps in the fire water supply system, and has achieved a good market.

XA Horizontal end suction Diesel fire pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, easy installation and maintenance.

XA series single-stage centrifugal pump is the earliest single-stage single-suction centrifugal pump product launched by Better (China) Technology Co., Ltd. This product combines the advantages of similar products in China and abroad, and is designed with excellent hydraulic model. Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operation cost of pumps in various applications.