Unlocking Efficiency: Exploring OTS Double-Suction Split-Case Pumps

The air conditioning circulation pump, also known as a chilled water pump, is a vital component of air conditioning systems used for circulating refrigerant or chilled water. It plays a crucial role in heat exchange and temperature regulation. The pump consists of an electric motor, pump body, impeller, sealing device, and control system.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

D-type horizontal, single-suction multi-stage, segmented centrifugal pump has the characteristics of high efficiency, wide performance range, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. For conveying clean water or other liquids with physical and chemical properties similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump flow parts, the sealing form and increasing the cooling system

Before start:

Turning the clutch by hand, there should be no jammedphenomenon at the turner position.
Opening the inlet valve and the vent valve, letting the waterfill into the pump’s chamber, then closing the vent valve.
Clicking the switch of motor, and confirming whether theturning is right or not.

Running:

Fully opening the inlet valves, and closing the valves of theoutlet pipe.
Connecting the power, Opening the valves of the outlet pipeand adjusting the needed working point when the turning velocityis normal.
Watching whether there exist abnormities or not, if yes,should the pump be stopped and inspected before re-running.

Stop:

After turning off the outlet valves one by one, shutting offthe power.
Shutting off the inlet valves.
If the ambient temperature is below 0 , some warm-℃keeping measures should be adopted.

This is a set of vertical turbine pump with a flow of 500gpm and a pressure of 7.5bar customized by a UAE customer. The vertical turbine pump is mainly composed of three parts: the upper part is the motor, the middle part is the water delivery pipe and the drive shaft. The lower end is the deep well. The working part of the pump, submerged below the surface of the well. Due to the depth of the well, the lift is required to be larger.

Equipment control function description
The equipment is designed to have one use and one standby function. The main pump runs
normally, and the standby pump starts automatically after the main pump fault .Control
cabinet with two start ways: remote start function and site start. (DC24V provided; Two
startup modes are available for users to select)
◆ Automatic start state
First, the switch to the “automatic” position, and then the remote startup instruction
sent. Upon receiving the startup instruction, it will immediately enter the running state, and
then the corresponding fire pump (jockey pump) indicator light on, the system will run the
main pump.Stop the running fire pump (jockey pump)remove the remote start instruction.
◆ Manual start state
First, put the switch to the “manual” position, press “fire pump start up” or “pressure
jockey pump start up” , then fire pump (jockey pump)operation indication lights on, then
enter the running state. When the fire pump (jockey pump) is running, press the “fire pump
stop or jockey pump stop button and the fire pump (jockey pump )stops running

Flow：50-7500 GPM
Head：3-20 Bar 40-300 psi
Power：11-1000 kw
Caliber：50-200 mm
Frequency：50 or 60 Hz

The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing. The XA pump is capable of handling different fluid mediums and provides efficient flow control. Its operating principle utilizes centrifugal force to draw in and propel fluids through the pump. Overall, the XA single-stage centrifugal pump is a reliable and efficient solution for fluid pumping needs in industrial settings.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.

WXZQ series fire-fighting stabilized pressure water supply equipment is based on GB27898.3-2011 fixed fire water supply equipment, Part 3: fire-fighting pressurized stabilized pressure water supply equipment. It fully absorbs the latest achievements and experience of air pressure water supply technology in recent years in terms of technology and selection methods of parts. It is a new type of ideal fire-fighting water supply equipment.

The oil pump is a light and compact pump, and there are three categories of in-line, distribution and single. The oil pump needs a power source to run, and the lower camshaft is driven by the engine crankshaft gear.

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105C¡£
Series OTS pumps are available for capacities Of 69-000m3/hr and heads of 70-200m.They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc. ?

The biggest characteristic of deep well pump motor and pump into an organic whole, it is immersed in the underground Wells to a kind of pump and water pump, is widely used in farmland irrigation and drainage, industrial and mining enterprises, urban water supply and drainage and sewage treatment, etc. Because the motor into the water at the same time, the reason for the structure of the motor requirements than the general motor special. The structure of the motor can be divided into dry type, half dry type, oil filled type, wet 4 kinds

The Vertical Single stage fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more.

The vertical turbine pump is a vertical pump composed of single or multiple centrifugal or mixed flow impellers and guide casings, lift pipes, drive shafts, pump bases, motors and other components. The pump base and motor are located on the upper part of the wellhead (or pool), and the power of the motor is transmitted to the impeller shaft through the transmission shaft concentric with the lift pipe, which drives the impeller to generate flow and lift.

Common issues include loss of power, inadequate water supply, and mechanical failures. Regular maintenance and prompt repair of identified issues can mitigate these problems.

The Scope of Work
Water pressure: 0. 2-2.5MPa (20~250 meters);
Flow range: 5-1200L/S
Power: 3kW~2000kW;
Speed range: 1500~3200r/min
Permissible media: Drinking water, chilled water, fire water, and other impurities without abrasive or long-fiber impurities and no chemical or mechanical pump for corrosive media.
Allow the maximum medium temperature 70℃, the maximum ambient temperature of 40℃;
Maximum allowable working pressure of 1.6MPa, the maximum inlet pressure 0.6MPa.

Electric vertical turbine pump with high efficiency, energy saving and high efficiency, pump impeller immersed in water, no bottom valve, no irrigation and shaft vacuum, can be directly started, very convenient and reliable.

·UL Standard
Flow：100-2500 GPM
Head：90-250 PSI
·NON-UL Standard
Flow：250-10000 GPM
Head：30-200 m / 3-20 Bar / 40-290 psi

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

multistage pump part waiting for patinting

ISW series horizontal single-stage single-suction centrifugal pump is a new generation of energy-saving, environment-friendly horizontal
centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts
domestic general performance parameters of centrifugal pumps. In addition, according to different operating temperatures and mediums,
we developed the hot-water pump(ISWR), corrosion-resistant chemical pump(ISWH), and oil pump (ISWB). This pump enjoys excellent perfor- mance, good reliability, long operation life, reasonable construction and nice appearance, which is outstanding in the industry.

The vertical turbine pump is a vertical pump composed of single or multiple centrifugal or mixed-flow impellers, guide casing, riser pipe, transmission shaft, pump base, motor and other components. The pump base and the motor are located on the upper part of the wellhead (or pool), and the power of the motor is transmitted to the impeller shaft through the transmission shaft concentric with the water pipe, driving the impeller to generate flow and lift.

Jockey pump after package
3 sets 50gpm 8bar jockey pump after package
Ready to dispatch to ningbo port

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

Electric fire pumps should be installed in a dedicated, well-ventilated room with adequate space for maintenance. The location should be easily accessible and comply with local fire codes and standards.

YW liquid sewage pump is a new generation of liquid sewage pump product successfully developed on the basis of our advanced technology at home and abroad and the use characteristics of liquid sewage pump. It has remarkable energy saving effect, anti-winding, no blockage and other characteristics, and has a unique effect in the discharge of solid particles and long fiber garbage.

Vertical turbine pumps are mainly used to transport clean water and sewage containing certain solid particles, corrosive industrial wastewater and seawater. Widely used in raw water treatment plants, sewage treatment plants, metallurgical steel industry, power plants, mines, municipal engineering and farmland water conservancy projects.

XA series single-stage centrifugal pump is the earliest single-stage single-suction centrifugal pump product launched by Better (China) Technology Co., Ltd.
This product combines the advantages of similar products in China and abroad, and is designed with excellent hydraulic model.
Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operation cost of pumps in various applications.